CTO Lighting HERON FLOOR User manual

Installation Guide
Please handle with care and wear gloves at all times during
assembly and installation to avoid damaging components.
[phone] ctolighting.co.uk [email protected].uk
HERON FLOOR

TECHNICAL
PARTS & COMPONENTS
A. 1 x Heron stem, 1 x Heron base, 1 x In-line switch and cord set
B. 4 x M5 screws
C. 1 x Cable clamp and screws
1 x Bulb removal tool
- All nuts and bolts required for the installation will be included in the delivery.
Bulb Holder
240v - 1 x GU10
120v - 1 x GU10
(bulbs not supplied)
Weight
brass base 9kg (19.8lbs)
marble base 13kg (28.7lbs)
Wattage
5.5w - 2700k - LED ONLY
A.
C.
B.

[phone] ctolighting.co.uk [email protected].uk
BEFORE INSTALLATION
- Check that you have all components before starting assembly.
- Assembly must be carried out by a qualified electrician.
- You will need the below specific tools for a successful assemble.

1.
3.
2.
Remove the top layer of polystyrene packaging and
place them on top of the lid creating a soft resting
surface.
Carefully remove the Heron Stem and Base from the
box and place on top of the box lid.
Note: Do not remove any of the protective nylon
sleeves from the light until the assembly is
complete.
Remove the two large polystyrene sections from the
box and place them upright, with the grooves in line
with each other, creating a platform for the Heron
stem.

4.
5.
Note: Support the Heron Stem and Base at all times
during assembly.
Place the Heron stem on the polystyrene sections and
lift the Heron Base into place.
With the base positioned on the end of the stem in
the correct orientation, secure with the 4 x screws.
Note: Ensure that all four screws are fully tightened.

6.
7.
With the base securely fixed to the bottom of the
stem, clamp the cable to the base using the supplied
clamp and screws.
Lift the Heron Floor upright, supporting the base and
stem at all times.
Fit the Heron Floor with a 5w LED GU10 using the
supplied bulb removal tool.

MAINTENANCE
CerticationCleaning
Dust using a dry lint-free cloth
weekly or as required
[phone] ctolighting.co.uk [email protected].uk
Repairs
Contact
CTO Lighting
Warranty
Please visit
www.ctolighting.co.uk/
pages/f-a-q
for CTO warranty policy E492309