Safavieh Lighting SADE FLL4015A User manual

WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this
plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact
a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety
feature.
CARE AND MAINTENANCE
Model# FLL4015A
Product Dimensions: 54.5"LX13.75"WX75"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-
brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid
the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe
use and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A big tube 1X G tube 1 1X
B Cover 1X H screw 2X
C Base 1X I screw 1X
D flat Washer 1X J tube 2 1X
E nut 1X K hexagon wrench 1X
F open wrench 1X L bulb 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
NOTE: PLEASE USE ON/OFF TYPE"A"BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT THERE IS 1PC LED 9-WATT BULB IN THE BOX
Step1: Put the lamp base (C) on the floor.Assemble the big tube(A) and cover(B) and
marble base(C) with (D)and (E) use tool(F).Insert the plastic connector(G）into the big
tube(A）and tighten with screw(H).
Insert the arc tuber(J） into the arc tube(G) and use hexagon wrench(K)to locking
screw(I).Insert the bulb(L)in to the socket.
Step2: Put the light on a level surface to check if every thing is stable.
2/2