Curtis GPD430 User manual

©2010 Sygic, s.r.o. All rights reserved.
Customer Support
Project: CURTIS
Devices: GPD359B, GPD430, SGPD430
Software: Sygic Drive 7.71 build: 9173
Original delivery: 08. Jun 2009
Solution: Improvement of the maps
Topic Description: When the end user try to search some addresses in Menu->Navigate to->
Addresses the software can’t find them. This update will improve the maps.
How to:
1. Visit http://www.sygic.com/index.php/download-tools/121-setupsygicassistant.html
and download Sygic Assistant.
2. Install it to your PC.
3. In your Curtis device, please folow these steps
a. Go to Main Menu- Setting>->USB
b. Please select MASS STORAGE mode
4. Connect your device with PC by USB cable
5. Run Sygic Assistent.
6. You will be asked for the disk drive. Please select internal Flash Disk drive of
you device.(not SD card Flash Disk). In dependance to your Internet
connection speed the downlaod may take even several hours
7. Click on Updates tab in the top menu.
8. Choose your update and click Download.
9. When downloaded click Install update. For more information you can click on
Info.
10. After successful instalation you can close Assistent and unplug your device.
Sucesfull instalation can be seen by green marked Installed tag