danew E135 User manual

1
USER MANUAL
E135
ALL ROAD GPS

2
Warnings and Notices
For your safety, do not operate the controls of the product while driving.
GPS satellite signals cannot typically pass through solid materials (except glass). GPS
location information is not typically available inside buildings, tunnels, or underground
parking lots.
A minimum of 4 GPS satellite signals is needed to calculate your GPS position. Signal
reception can be affected by weather events or overhead obstacles (e.g. dense foliage and
tall buildings).
Other wireless devices in the vehicle may interfere with the reception of satellite signals and
cause the reception to be unstable.
Adapter
Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it
is damaged or exposed to excess moisture.
Do not use the adapter if the cord becomes damaged.
Connect the adapter to the proper power source. The voltage requirements are found on the
product case and/or packaging.
Battery
This unit contains a replaceable Li-ion battery. The battery could be bursting or exploding
and
releasing hazardous chemicals in case of over battery specification and using in an abnormal
conditions;
disassemble, crush, puncture, or dispose of the battery in fire or water. Abnormal operation
could be dangerous
to your human body. Please be aware.
Use only the specified charger approved by the manufacturer.
Risk of explosion if battery is replaced by an unofficial type. Dispose of used batteries
according to the
instructions.
WARNING: The Lithium-Ion battery in the device must be recycled or disposed of
properly.

3
Table of Contents
Chapter 1 Features and Specifications ........................................................................................4
1.1 E135 PND features..................................................................................................4
Chapter 2 Getting Started.........................................................................................................5
2.1 Hardware overview..................................................................................................5
2.2 Installation on a Motorcycle....................................................................................7
2.3 Installation in a Car..................................................................................................9
2.4 Charging your E135 device..................................................................................10
Chapter 3 Using the E135.........................................................................................................10
3.1 E135 Operating Basics.........................................................................................10
3.2 Reset ......................................................................................................................12
3.3 Set the Quick menu bar:....................................................................................... 13
Chapter 4 E-compass................................................................................................................13
4.1. Settings...................................................................................................................13
Chapter 5Multimedia..............................................................................................................15
5.1. Music player...........................................................................................................15
5.2. Photo Viewer..........................................................................................................16
Chapter 6Bluetooth...................................................................................................................17
6.2. Bluetooth connection.............................................................................................17
Chapter 7 Troubleshooting and Maintenance.......................................................................18
GPS Speedcamera locator..........................................................................................................19

4
Chapter 1: Features and Specifications
1.1 E135 PND features
The E135 Portable Navigation Device is a powerful multifunction GPS/multimedia navigation
and entertainment device.
•3.5”with TSP (Touch Screen Panel)
•Sun light readable
•High sensitivity Broadcom GPS
•Bluetooth audio communication
•MP3 player/Photo viewer
•Recharge and replace battery
•IPX7 water proof in out door application
Temperature
Operating Temperature : -10 °C to +55 °C
Storage Temperature : -30 °C to +70 °C
Language
English / German / French / Spanish / Italian
Weight
190 g
Dimension
L: 105 mm, W: 81.9 mm, H: 26.2 mm
Chassis
Specifications
Chassis is made of sunlight/UV-proof material and coating.
Meet IPX7 waterproof standard
Color
Gray / Black , Gray / Green
Component
Specification
CPU
ARM9 @400MHz
Operation System
Windows CE 5.0 core version
GPS
Broadcom host based chipset
TFT LCD
TFT, 3.5”, 240x320 QVGA
SDRAM
128 MB mDDR
NAND Flash memory
2 GB MLC
Battery
1800 mAh rechargeable ad replaceable Li-ion
Power Management
Yes
I/O
MiniUSB Client connector
MicroSD card
Button
Power button x 1
Display
Screen Type
TFT-LCD with touch panel
Screen Size
3.5”
Resolution
240 x 320 pixel QVGA
Color
65536 colures
Backlight
Most 6 LED backlight
USB
USB Connector MiniUSB B-type connector for factory test, battery charging,
power supply and PC connection

5
Button / Slot
Power button Yes for power on and off
Mini-USB Slot Yes for factory test, battery charging ,power supply
and PC
connection
Micro SD/MMC Slot Yes for software update
Bluetooth 2.0
Application
Connect with Bluetooth headset to make a Stereo/Mono audio
communication
Chapter 2 : Getting Started
2.1 Hardware overview
Packaging standard
1
Device, E135
2
Cradle
3
USB cable
4
AC adapter
5
Car mounting kit
6
Car Charger
7
Quick Start Guide
8
User Manual CD
9
Warranty Statement Card
10
Handlebar base accessories
11
Double-socket arm
Front View Rear View
NO Function Description
1 Touch Screen Displays the applications, data, and map images.
2
USB Port/Docking
connector
Mini-USB connector serves as the power connector for charging the
device or as the dock for uploading files from computers.
3 Power Button Long press 5 seconds to turn on/off the PND.
4 Speaker Emits system sounds.
5 Ring Lock To tighten the rear cover.
1
2
3
4
5

6
Rear View (without rear cover)
Component
Description
Battery Slot
1
Put the battery on the slot, before use the device.
Micro SD slot
2
Accepts Micro SD storage cards, allowing you use audio and image
files stored in it for use with internal applications
Assembly your E135:
1. Put the battery on your E135
2. Insert the Battery in your E135 (Photo 1-1)
3. Put on the rear cover on your E135 (Photo 1-2)
4. Fix the lock button by turning the ring.
1
2
Photo 1-1
Photo 1-2

7
2.2 Installation on a Motorcycle.
Install the U-Bolt ,Holder and Handlebar
base:
1. Place the U-Bolt and the holder around
the handlebar, and thread the ends
through the handlebar base. (Photo
3-1)
2. Tighten the bolts to secure the base.
Do not over tighten.
Fix the double–socket arm to knob:
1. Thread the bolt through double-socket
arm to knob. (Photo 3-3)
Attach the Base Plate to the E135 Mount
Photo 3-4
Photo 3-1
Photo 3-3

8
Attach the Base Plate to the Handlebar Base
Install the E135 in the Cradle
1. Flip the lever up
2. Place the E135 in to the cradle, and flip the lever down.
3. Tighten the security screw.
Photo 3-5
Photo 3-6

9
2.3 Installation in a Car
Install the car mount on the selected area.
1. Press the suction cup of the car mount firmly against to the windshield.(Photo 4-1)
Install the E135 in the Cradle
Photo 4-1
Photo 4-2
Photo 4-5
Photo 4-3 Photo 4-4

10
2.4 Charging your E135 device
1. Plug the car charger to the 12 V outlet of your car and then connect the charger cable to
the Mini USB port of the E135.(Photo 5-1)
2. You now can let your E135 have the continuous power by the car charger.
NOTE:
Your car may be required to switch the vehicle ignition into the accessories position
to power the cigarette lighter. Your E135 will not charge with the ignition off.
Chapter 3: Using the E135
3.1 E135 Operating Basics
After fully charging the E135 it is ready to be used. You can now turn it on and proceed to
system settings configuration.
After turn on the device, main page will display. This is also referred to the Favorite page.
Photo 5-1