DANNER MFG 9.5A User manual
DRIP
LOOP
6
•
™
Magnet impeller assembly must be routinely removed for cleaning in white vinegar to remove accumulations of scale or calcium. This
procedure should be done at least once every three months -or more often if the water conditions require it.
Danner pumps are warranted against failure due to defects in materials and/or workmanship as follows: Pump body and
cover within five years, impeller and included accessories within one year of original purchase. This warranty does not cover
any replaceable filtering material supplied with the pump or filter as it is considered expendable. This warranty covers defects
occurring under normal use. The warranty and remedies set forth herein are conditional upon proper installation, use, mainte-
nance, storage, and conformance with the applicable use. It will be based upon Danner Mfg. discretion as to whether the
defects are of manufacturing origin. For warranty repair, return only the part that is defective to our factory. Please include
a dated proof of purchase and $5.00 for postage and handling. Any damages due to improper installation are not covered
by this warranty. This warranty does not apply to appearance or aftermarket accessory items. This warranty does not include
damage due to handling, transportation, unpacking, setup, installation, repair or replacement of parts supplied by any other
than Danner Mfg.; improper maintenance, modification or repairs by the purchaser; abuse, misuse, neglect, accident, fire,
flood, or other acts of God. Any oral statements about this product made by the seller, the manufacturer, their representa-
tives or any other parties do not constitute warranties and shall not be relied upon by the user and are not part of this
contract. Neither the seller nor the manufacturer shall be liable for any injury, loss or damages, direct, incidental, or conse-
quential, including but not limited to incidental or consequential damage for lost profits, lost sales, injury, and inability to use
the product and the user agrees that no other remedy is available. Before using, the user shall determine the suitability of the
product for their intended use and the user shall assume all risk liability whatsoever in connection therewith. TO VALIDATE THIS
WARRANTY, KEEP YOUR PROOF OF PURCHASE (COPY OF SALES RECEIPT FROM A CERTIFIED PONDMASTER OR SUPREME
DEALER). Warranty covers the repair or prorated replacement of the Danner Mfg. products. Danner Mfg. denies all liability for
any other loss including but not limited to loss of equipment, income, livestock, vegetation or personal injury.
THE FOLLOWING VOIDS WARRANTY: LINE CORD OR PLUG IS ALTERED OR CUT, PRODUCT LABELS ARE DEFACED OR REMOVED.
PRODUCT IS IMPROPERLY INSTALLED OR MAINTAINED BY USER OR THEIR AGENT. PRODUCT IS ABUSED, MISUSED, OR DAMAGED
BY USER OR THEIR AGENT. PRODUCT IS NOT REMOVED FROM SERVICE AND DRIED DURING FREEZING CONDITIONS.
L IM I T E D W A R R A N T Y
PUMP PARTS LIST
PUMP
MODEL
IMPELLER
ASSEMBLY
PUMP VOLUTE
with O-RING
12745
12746
12733
12A 12755
12756
12741
12733
12741
18A
18B
12775
12776
12741
12741
PREFILTER FOAM
with INSERT
12730
12730
12730
12730
12730
12730
RIGID
PREFILTER
12785
12785
12785
12785
12785
12785
9.5A
12B
9.5B, 3600LPH
ZG100 revF 11/20
PARTS LIST AND SPECIFICATIONS FOR MAGNETIC DRIVE
120v/60Hz 9.5/12/18 PUMPS and 230V/50Hz 3600 PUMPS
1) Disconnect power to pump
2) Remove pump from water.
3) Position pump with volute inlet facing upwards
4) Pour Pumpguard into volute inlet until full.
5) Allow to soak for 2 to 3 minutes.
6) Thoroughly rinse with clean water.
7) Place pump back into service.
PUMPGUARDTM pump maintenance solution is
available in three sizes:
4 oz. ----- Impeller/Volute Treatment ---------Item # 03905
32 oz. --- Soak/Dunk & Impeller Treatment --Item # 03907
128oz. -- Commercial Size ------------------------ Item # 03909
PUMP GUARD INSTRUCTIONS
PUMPGUARD ™ easy maintenance solution will keep
water pumps running like new when used regularly.
YOUR PUMP MODEL # IS IMPRINTED DIRECTLY ON THE
PUMP OR ON THE LABEL NEAR THE ELECTRICAL CORD PARTS ILLUSTRATED BELOW VARY WITH DIFFERENT MODELS
AND ARE NOT INCLUDED WITH ALL MODELS.
DANNER MFG. INC 160 OVAL DRIVE, ISLANDIA NEW YORK 11749
VISIT OUR WEBSITE: WWW.DANNERMFG.COM
120V MODELS
230V MODELS
IMPELLER
ASSEMBLY
VOLUTE
PREFILTER FOAM with INSERT
RIGID PREFILTER
and COLLAR
VIBRATION
PAD
O-RING
This manual suits for next models
6
Table of contents
Other DANNER MFG Water Pump manuals
Popular Water Pump manuals by other brands
HOMEDEPOT
HOMEDEPOT EVERBILT SUP80-HD Use and care guide
Blue Diamond
Blue Diamond Microblue installation instructions
BLACK DECKER
BLACK DECKER BXGP600PBE manual
Little Giant
Little Giant PE-2.5F-PW Series manual
Little Giant
Little Giant NK-1 Series owner's manual
FLORABEST
FLORABEST FTS 1100 C3 translation of original operation manual
Power Fist
Power Fist 8238347 quick start guide
PROCRAFT
PROCRAFT PN21 manual
IMP PUMPS
IMP PUMPS NMT SMART /40 Series Installation and operating manual
Pure line
Pure line PL1600 Series Installation and user guide
Central Pneumatic
Central Pneumatic 96677 Set up and operating instructions
FLORABEST
FLORABEST FGPS 1100 C3 Translation of the original instructions
