Datapath Image4K User manual

Engineering the world’s best visual solutions
Quick Start Guide
Image4K
ImageDP4+
Image Graphics Cards

Thank you for purchasing a Datapath Image
Graphics card. The aim of this document is
to quickly guide you through the process of
initial setup.
For detailed information, the User
Guide can be downloaded from
www.datapath.co.uk.
CONTENTS
Your packing box contains the following items:
Your Image graphics card
4 x DVI adapters (ImageDP4+/DVI only)
4 x HDMI adapters (ImageDP4+/HDMI only)
For latest drivers go to www.datapath.co.uk.
Note: All Products are static sensitive and
are packed in antistatic materials. Please
keep the card in its packaging until you are
ready to install.
STEP 1 - HARDWARE
INSTALLATION
Installing your Image graphics card is a simple
process. In summary, the following steps need to
taken to be up and running in a few minutes:
1. Ensure that the Windows® System is set to standard
single screen VGA resolution.
2. Locate a vacant PCI Express (x8 electrical, x16
physical) slot on the motherboard and remove
the blanking plate. Retain all screws.
3. Ensure the required software has been installed
(see software installation section).
4. Right click on the desktop and select the Display
Driver Conguration Tool (DDCT) from the menu.
Follow the instructions to congure your displays.
Full details of the DDCT can be found in the User
Guide located on the Datapath website.
www.datapath.co.uk
ImageDP4
Image4K
Image Graphics Quick Start Guide

STEP 2 - SOFTWARE
INSTALLATION
Download the required driver and install from the
Datapath website, and follow the Installation Wizard
instructions as prompted.
When installing the display driver you will be oered
the choice of the WDDM driver and the XDDM driver:
WDDM is the driver architecture used by modern
Windows Operating Systems such as Windows
10. The Datapath WDDM driver currently provides
support for up to 12 ImageDP4+ cards or 6
Image4K cards.
XDDM is the legacy driver architecture used by
graphics drivers from Windows 2000 through
to Windows 7 and Windows Server 2008 R2.
The XDDM driver currently supports up to
16 ImageDP4+ cards. The XDDM driver is not
compatible with Windows 10.
COPYRIGHT STATEMENT
© Datapath Ltd., England 2019.
Datapath Limited claims copyright on this
documentation. No part of this documentation
may be reproduced, released, disclosed, stored in
any electronic format, or used in whole or in part for
any purpose other than stated herein without the
express permission of Datapath Limited.
Whilst every eort is made to ensure that the
information contained in this documentation is
correct, Datapath Limited make no representations
or warranties with respect to the contents thereof,
and do not accept liability for any errors or omissions.
Datapath reserves the right to change
specication without prior notice and cannot
assume responsibility for the use made of the
information supplied. All registered trademarks
used within this documentation are acknowledged
by Datapath Limited.
Image4K
Image Graphics Quick Start Guide

Datapath UK and
Corporate Headquarters
Bemrose House, Bemrose Park,
Wayzgoose Drive, Derby,
DE21 6XQ, United Kingdom
[phone]
[email protected].uk
Datapath North America
2490 General Armistead Avenue,
Suite 102, Norristown,
PA 19403, USA
[phone]
[email protected].uk
Datapath France
[phone]
[email protected].uk
Datapath Germany
[phone]
[email protected]
Datapath China
[phone]
[email protected]
Datapath Japan
[phone]
[email protected].uk
www.datapath.co.uk
QSG-IGC-EN2-V1.0