Dawn D37 2534 User manual

Installaon Instrucons
Model: D37 2534
Free-standing Shower
www.dawnusa.net
Kitchen & Bath Products, Inc.
TABLE OF CONTENTS
Preparaon 2
Materials & Tools 2
Parts 2
Installaon 3-5
Care and Cleaning 6
Warranty 6
Return Policy 6
Asking for Assistance 6
Please read all instrucons carefully before starng the installaon.

2
D37 2534
INSTALLATION INSTRUCTIONS
PREPARATION
●Before You Begin
Before installing any Dawn product in your home, make sure you are in compliance with all local plumbing codes.
●Check The Accessory Items
Before installaon, please check the condion of the product and, if appropriate, its components. If there is any
problem with the product and/or its components, please contact the store you purchased it from for a replacement.
As soon as you have inspected your product, please return it to its original packaging unl you are ready to install it.
●Handle With Care
To protect its nish and avoid damage before and aer installaon, please handle the product with care. For care
and cleaning ps aer installaon, please refer to the Care and Cleaning Guide in this instrucon guide.
MATERIALS & TOOLS
Assorted Screwdrivers, Adjustable Wrenches, Pencil, Masking Tape, Thread Sealant, Other Tools as Needed
PARTS
*Drawings are for reference only. Please refer to actual product for exact size, shape and parts.
*Dawn reserves the right to make revisions in the design of faucets without noce for improvement of product performance and quality.
Item Qty.
1Main Body 1
2Escutcheon 1
3Screw 2
4Spring Gasket 2
5Shield 1
6Rubber Plugs 2
7Base 1
8Expansion Plug 4
9Handshower 1
10 Shower Hose 1
11 Protecve Ring 1
12 Allen Key 1

3
D37 2534
INSTALLATION INSTRUCTIONS
INSTALLATION
IMPORTANT: Recommended for professional installers only. The installer maintains responsibility for installing the product safely.
 The faucet main body is already assembled. Do not disassemble it.
 Thoroughly clean the inside of all pipes with a cloth before installaon.
 Check all connecons for leaks aer installaon.
 Water pressure range: 0.05 MPa to 1 MPa (7.26 psi to 145 psi)
Water temperature range: 39°F to 194°F (4°C to 90°C)
DIMENSIONS

4
D37 2534
INSTALLATION INSTRUCTIONS
INSTALLATION
IMPORTANT: Recommended for professional installers only. The installer maintains responsibility for installing the product safely.
Place the base unit in the mounng hole and mark
the 4 drill holes accordingly. Remove the base unit
and drill Ø8mm (Ø5/16”) holes on the marks.
Replace the base unit and insert the expansion
plugs (8) through the holes.
Drill a mounng hole as shown above.
If the thickness of the decorave layer is ≥ 50mm
(1 31/32”), install on the oor directly.
Assemble the shower main body to the base as
shown in gure 4.
Connect the base to the water supply and ush to
check for leaks with water pressure ≤ 1.6 MPa (232
psi). Make sure there’s no leak, then assemble the
protecve ring (11) to the base. Furnish the oor.
When cement is dry, remove the protecve ring,
screws (3), spring gaskets (4), shield (5), and rubber
plugs (6).
(3 5/32”)
mm
mm
(1 31/32”)
(5 29/32”)
＊Make sure the water supply lines are in place
underneath the oor and are directly accessible.
Base Unit

5
D37 2534
INSTALLATION INSTRUCTIONS
INSTALLATION
IMPORTANT: Recommended for professional installers only. The installer maintains responsibility for installing the product safely.
LEGAL DISCLAIMER:
●This instrucon guide is done as a public service to customers of Dawn Kitchen & Bath Products, Inc. (“Dawn”). For special situaons or further assistance, please consult professionals.
●All products should be inspected by customers upon receipt and before any installaon. Any defecve product should be reported immediately and should NOT be installed.
●Requirements may vary for installaon in a granite, marble, stone, or butcher block countertop.
●Installaon by professional installers is highly recommended. Dawn assumes no liability for any damages incurred through the use of informaon provided in this guide.
Fasten the screws (3) with Allen key (12).
Connect the handshower (9) and the main body
with the shower hose (10).
 Pull the handle up for connuous water
ow; push it down to turn the water o.
 Push the handle toward the front for hot
water and toward the back for cold water.
Flush to check for leaks again. Make sure there’s no
leak, then push the escutcheon (2) down unl it
rests against the oor.
With the water running:
 Pull the diverter knob up to divert the water
to the handshower.
 Push the diverter knob down to divert the
water back to the spout.

6
CARE AND CLEANING
To maintain the product and to avoid possible damage:
1. Clean as and when required. Regular cleaning prevents scale buildup and water spong.
2. To clean, ush with clean water and dry with a so cloth.
3. To remove scale or water spots, only use cleaners made specically for that purpose. Apply cleaners to cleaning cloths, pads, or sponges
rst; do not apply directly onto the product.
4. Do not allow any cleaning product to remain on your faucet for longer than necessary.
5. Do not use any abrasive cleaning products, such as scrubbing detergent, polisher, sand-cloth, paper ssue, or scrapper.
6. Do not use detergents or soaps that contain acid or that are undissolvable.
7. Take the aerator o and clean it when necessary.
8. Aer cleaning, rinse thoroughly with clean water to remove any cleaner residue.
WARRANTY
Limited Lifeme Warranty
Dawn® warranes all of its products to be free from manufacturing defects in material and workmanship during normal residenal use for as long
as the original purchaser owns his or her home. This warranty only extends to the original consumer and this warranty is non-transferable. If any
defect is found in normal residenal use, Dawn® will, at its own elecon, repair, provide a replacement part of product, or make appropriate
adjustment at no charge (excluding labor charges and other incidental or consequenal costs). Damage to a product caused by accident, misuse,
or abuse is NOT covered by this warranty. Improper care and cleaning will void the warranty. If Dawn® is unable to provide a replacement and
repair cannot be made, Dawn® may elect to refund the purchase price to the original consumer purchaser in exchange for the return of the
product. (IMPORTANT: The original consumer/purchaser should be responsible for inspecng products upon receipt. Any defecve product
should be reported immediately and should NOT be installed.)
DAWN® WARRANTIES DO NOT COVER, AND DAWN® DISCLAIMS ANY LIABILITY FOR:
1. Condions or damage NOT resulng from defects in material or workmanship.
2. Condions or damage resulng from:
—Normal wear and tear, improper installaon or maintenance, misuse, abuse, negligence, accident, moving (pping) or
alteraon, scratches or handling damages.
—Use of abrasive cleaning products or the use of the product in any manner contrary to the product instrucons.
—Condions in the home such as excessive water pressure, water quality or corrosion.
3. Labor, shipping or other costs for removal, installaon, replacement or return of product for warranty service.
4. Parts, accessories, connected materials or related products that are not manufactured by Dawn®.
5. Imperfecons such as checks (small surface splits), pitch pockets (small dark holes), grain or darker mineral streaks are natural and are not
considered defects.
6. An invoice number will be required for proof of purchase
Dawn® reserves the right to inspect any Dawn® product reported to be defecve prior to any repair or replacement. Repair and replacement
costs EXCLUDE shipping, labor, and consequenal expenses.
To obtain warranty service, contact Dawn® either through your Dealer, Plumbing Contractor, Home Center or E-retailer, or by contacng Dawn®
at the contact informaon listed below. Proof of purchase (original sales receipt) and descripon of problem must be provided with all warranty
claims.
RETURN POLICY
You may only return new, uninstalled, or unused items sold and fullled by Dawn Kitchen & Bath Products, Inc. for a full refund within 30 days of
delivery. Items must be returned in its original package. Returns of used items or returns aer 30 days of delivery may be accepted with a 15%
restocking fee. Dawn will pay for return shipping costs only if the return is a result of our fault. If you receive a faulty product and need to ex-
change it for the same product, please contact our customer service via phone, fax, or
e-mail to request a replacement. If you would like to exchange a product for a dierent one, please rst return the original product to our loca-
on at 27688 Industrial Blvd., Hayward, CA 94545 and then place a new order.
PARTIAL REFUNDS MAY BE GIVEN TO:
●Most of the items that are returned aer 30 days of delivery
●Any item not returned in the condion it was delivered
●Any item that has obvious signs of use
●A 15% restocking fee will apply to all used items or items returned aer 30 days of delivery.
ASKING FOR ASSISTANCE
Dawn Customer Service Department
27688 Industrial Blvd., Hayward, CA 94545
Toll-Free: 877-DAWN-USA (877-329-6872)
E-mail: [e-mail] Web: www.dawnusa.net
© 2016 Dawn Kitchen & Bath Products, Inc.