De La Rosa Research DLROCK-SS User manual

O’Clockit
Screen Stand
User´s
Guide
Model
DLROCK-SS

Congratulations!
De la Rosa Research Team.
You have just acquired an innovative, high
quality product. We have put our highest
effort into each development stage. We are
sure that you will find this equipment most
reliable and accurate - exceeding
your expectations.
Before using this device, we strongly
recommend that you carefully read the
user manual. There you will find all related
information for correct handling and
usage of this product.
We hope that you enjoy using this
equipment as much as we did creating it.

19
Procedure
Pag.
13
Features
Pag.
11
Applica�ons
Pag.
9
Specifica�ons
Pag.
7
Details
Pag.
INDEX

DETAILS







7
O’Clockit - Screen Stand // User´s manual

ESPECIFICATIONS



9
O’Clockit - Screen Stand // User´s manual

.
APLICATIONS
11
O’Clockit - Screen Stand // User´s manual




FEATURES
13
O’Clockit - Screen Stand // User´s manual

BASE STAND - COVER
This part is used as an adjustable
stand and cover (for travels) to set the
equipment tilt, and also as a travel
screen protector to prevent screen
breakings during transportation
FEATURES
BODY
Body made with high quality
components, high strength, 100%
recyclable materials and
easy to clean.
USB CABLE
20 cm USB 3.0 Cable, connect the
Surface to the O’ClockIt Device -
Stand Screen.
SCREEN
• Input Methods: Finger,
gloved hand, passive stylus.
• Number of touches: One
touch.
14
O’Clockit - Screen Stand // User´s manual
15
O’Clockit - Screen Stand // User´s manual

FEATURES
COMFORT
The main body of the equipment has
a stand to recline in this way.
USB 3.0 PORTS
3 hub 250 mA enabled for connecting
elements such as a mouse, keyboard,
etc.
MATERIALS
Aluminium materials with black
microtexturized electrostatic
paint finish, translucent acrylic
and PLA printed components.
16
O’Clockit - Screen Stand // User´s manual
17
O’Clockit - Screen Stand // User´s manual

PROCEDURE


19
O’Clockit - Screen Stand // User´s manual







and connected to a


the tests.
// GENERAL RECOMMENDATIONS
PROCEDURE


















20
O’Clockit - Screen Stand // User´s manual
21
O’Clockit - Screen Stand // User´s manual

a.
x1
c.
x1
b.
x1
a. O’Clockit - Screen Stand body x1 // b. Microsoft Surface Pro Box x1 // c. USB Cable 3.0 x1 //
// INITIAL SETTINGS
PROCEDURE
WHAT SHOULD BE INCLUIDED IN THE PACKAGE?



22
O’Clockit - Screen Stand // User´s manual
23
O’Clockit - Screen Stand // User´s manual

USB Cable 3.0 has two
different terminations:
B
A
HOW TO ASSEMBLE?
HUB 3.0 INPUT
USB port for serial communica-
tion with the Surface
AUDIO OUTPUT
Lorem ipsum dolor sit amet,
consectetuer adipiscing elit, sed
diam nonummy
USB 3.0
USB port for
serial communication.
// INITIAL SETTINGS
PROCEDURE
24
O’Clockit - Screen Stand // User´s manual
25
O’Clockit - Screen Stand // User´s manual

1
Press
down
2Pull up
STAND COVER AS A ADJUSTABLE BASE
Use the stand cover as an adjustable base.
Place the cover in a flat surface and position the
o’clock-IT SS above it to fixate the tilting position.
STAND COVER AS PROTECTOR
Remove the stand cover that was protecting the screen during the shipment / travel.
Release the lower bracket by gently (but firmly) pressing the release lever down while
pulling up the o’clock-IT SS body from the traveling position.
// INITIAL SETTINGS
PROCEDURE
HOW TO ASSEMBLE?
26
O’Clockit - Screen Stand // User´s manual
27
O’Clockit - Screen Stand // User´s manual

// INITIAL SETTINGS
PROCEDURE
HOW DO I MAKE THE CONNECTION? INSERT SURFACE TABLET
Insert the Surface tablet into the O'Clockit
casing. Slide gently.
SURFACE TABLET
Remove packaging and
Turn on the surface tablet.
TURN ON
28
O’Clockit - Screen Stand // User´s manual
29
O’Clockit - Screen Stand // User´s manual

If more power is
required on the
HUB's USB ports, a
5-volt external
adaptor must be
used.
not included.
Please note that these items
are optional.
// INITIAL SETTINGS
PROCEDURE
POWER CABLE
Connect the Power cord.
ELEMENTS
Connect the items you need for proper
equipment handling.
30
O’Clockit - Screen Stand // User´s manual
31
O’Clockit - Screen Stand // User´s manual

// INITIAL SETTINGS
PROCEDURE
READY TO START
Make sure everything is properly connected.
CONNECTION
Connect the 3.0 USB cable to
the Surface tablet.
Use the mouse to handle
the computer,
when you start calibration
use the stylus.
32
O’Clockit - Screen Stand // User´s manual
33
O’Clockit - Screen Stand // User´s manual

// INITIAL SETTINGS
PROCEDURE
HOW DO I MAKE THE SCREEN CALIBRATION?
Select from the ELO touchscreen Control option Panel.de the display.
START
Select the ELO icon located at the bottom left of the screen.
CONTROL PANEL
Select the enhanced option in calibration mode.
34
O’Clockit - Screen Stand // User´s manual
35
O’Clockit - Screen Stand // User´s manual

// INITIAL SETTINGS
PROCEDURE
CONTROL PANEL
Continue with the Apply option.
CALIBRATION
Press the center of the target with the stylus.
Press the center of the target of each corner.
Select the Align option.
Try to be precise, this
improves the calibra-
tion settings.
36
O’Clockit - Screen Stand // User´s manual
37
O’Clockit - Screen Stand // User´s manual

CALIBRATION
Make sure the cursor and stylus are at the same point, if correct
Select () otherwise repeat calibration ().
Select the OK option to finish.
This is all the basic information you will need
for using the O’Clockit Screen Stand; but this is
just the beginning of the fun.
If there is something that is not clear to you, or
if you have any questions, please feel free to
contact us at any time.
We will be very happy to hear from you.
[email protected]
([phone]
([phone]
Cll 147 A # 48 - 08. Bogotá, Colombia
2550NW 72nd Ave. Suite 115. Miami, Fl.
33122.
De la Rosa Research Team.
This is the end of this user guide.
38
O’Clockit - Screen Stand // User´s manual