De Projectinrichter BELLEVUE AJ3 User manual

BELLEVUE AJ3
by ARNE JACOBSEN
andtradition.com
USER
INSTRUCTIONS
Congratulations on choosing this Bellevue
desk lamp designed in by Arne Jacobsen
in 1929. We hope you will enjoy using this
lamp and follow these instructions to ensure
correct operation. If you have any questions
or comments, please do not hesitate to
contact us by mail on:
[e-mail]

A- Lamp Shade
B- Adjustable swan-neck
C- 3 meter cord with switch
Description Of Parts:
Please read these instructions
carefully and retain them for
future reference to ensure
that the lamp is correctly
operated. For your own safety,
please study each step of this
instruction manual before
you commence operation.
&Tradition are not responsible
for any faults or damages
caused by not following these
instructions correctly. Do not
modify this lamp in any way.
- Dispose of plastic bag from packaging and do not allow children to play with it.
- The lamp is only intended for interior use.
- Lamp shade gets hot after prolonged use.
- Do not place the cable in reach of small children or anywhere there is a risk of falling over it.
Installation Suggestions:
The Bellevue AJ3 desk lamp can be used as a stand alone lighting source or in combination
with the other lamps in the Bellevue series. Place it on a work desk, side table, credenza
or bedside table. The lamp can also be used in combination with the rest of the &Tradition
collection. Visit our website for more inspiration:
www.andtradition.com
Safety Precautions:
Cleaning Instructions:
- Wipe surface of lamp shade with a soft, damp sponge or cloth.
- Do not use any abrasive cleaning tools such as steel wool, scouring sponges or stiff brushes.
- Never use strong cleaning agents such as white spirit, terpentine, household glass cleaner or
cellulose thinners.
- Only wipe the inside of the shade with a soft, damp cloth or feather duster..
A
B
C

Use the flexible swan-neck to set the
shade at a desired angle. It is best to
set the angle before turning the lamp
on as the shade gets hot when the
lamp is in use for longer periods of
time.
The lamp accept standard screw mount
bulbs:
01.
02.
Maximum 60 W.
Tungsten E27 bulb.
Maximum 12 W.
Low Energy E27
bulb.

BELLEVUE AJ2
by ARNE JACOBSEN
andtradition.com
USER
INSTRUCTIONS
Congratulations on choosing this Bellevue
floor lamp, designed by Arne Jacobsen
in 1929. We hope you will enjoy using
this lamp. To ensure correct use please
follow these instructions. If you have any
questions or comments, please do not
hesitate to contact us by mail on:
[e-mail]

A- Lamp Shade
B- Adjustable goose-neck
C- Screw
D- Height adjustable pillar
E- 3 meter cord with foot-switch
Description Of Parts:
Please read these instructions
carefully and retain them for
future reference to ensure that
the lamp is used correctly. For
your own safety, please study
each step of this instruction
manual first. &Tradition are
not responsible for any faults
or damages caused by not
following these instructions
correctly. Do not modify this
lamp in any way.
- Dispose of plastic bag from packaging and do not allow children to play with it.
- The lamp is only intended for interior use.
- Lamp shade gets hot after prolonged use.
- Do not place the cable in reach of small children or anywhere there is a risk of falling over it.
Installation
Suggestions:
The Bellevue AJ2 floor lamp can
be used as a stand alone lighting
source or in combination with
the other lamps in the Bellevue
series. Place it next to a sofa,
armchair, credenza or bedside
table. The lamp can also be used
in combination with the rest of
the &Tradition collection. Visit our
website for more inspiration:
www.andtradition.com
Safety Precautions:
Cleaning Instructions:
- Wipe surface of lamp shade with a soft, damp sponge or cloth.
- Do not use any abrasive cleaning tools such as steel wool, scouring sponges or stiff brushes.
- Never use strong cleaning agents such as white spirit, terpentine, household glass cleaner or
cellulose thinners.
- Only wipe the inside of the shade with a soft, damp cloth or feather duster.
AB
C
E
D

Follow these steps when adjusting the height of the shade. Be sure not to over extend the
lamp height beyond the maximum height of the pillar.
01.
To raise the shade:
1. Loosen the screw.
2. Pull the shade up to the
desired height.
3. Tighten the screw.
To lower the shade:
1. Losen the screw.
2. Lift the lamp by the pillar
beneath the screw. This allows
the cord to move freely.
3. Lower the shade to the
desired height.
4. Tighten the screw.

Use the flexible goose-neck to set the
shade at a desired angle. It is best to
set the angle before turning the lamp
on as the shade gets hot when the
lamp is in use for longer periods of
time.
The lamp accepts standard screw
mount bulbs:
02.
03.
Maximum 60 W.
Tungsten E27 bulb.
Maximum 12 W.
Low Energy E27
bulb.
nederlandse advocatenfilm