Deco Home DGJUMP User manual

USER MANUAL
Assembly Instrucons
for DGJUMP Indoor Trampoline System

Before using this product please read this instrucon manual carefully and
follow the informaon provided to use your trampoline correctly.
Please keep this instrucon manual for future reference
For more informaon, visit www.decogear.com
Contact support at [e-mail] or call 844-413-2646
1
1. Open the trampoline into a quarter-circle, taking care
not to jam the screw head (pictured in red square above).
2. Open the trampoline into a into a half-circle and unfold
again from the middle crease unl you have a full circle.

For more informaon, visit www.decogear.com
Contact support at [e-mail] or call 844-413-2646 2
3. Stand the trampoline frame up and put on the cover.
Ensure that the aachment points and joints are free.
4. Install all legs and make sure they are secure. Once n-
ished, your trampoline is assembled.
On the next page, see how to install the hand rail.

For more informaon, visit www.decogear.com
Contact support at [e-mail] or call 844-413-2646
3
1. Install the 5 height adjustment levers on both sides.
Please note that the h gear posion is at the boom
2. Install and ghten the Torx nut. Insert the armrest into
the corresponding folding structure.
HAND RAIL ASSEMBLY AND INSTALLATION

For more informaon, visit www.decogear.com
Contact support at [e-mail] or call 844-413-2646 4
3. Repeat previous step on the other side. Then Install and
ghten the armrest screws.
4. Install and ghten the armrest screws on the other side.
Completed assembly pictured on the right.

10