Quick start instructions
1. Charge the Dream Master with the
included USB cable by plugging the
mini-USB end into your Dream Master
and the other end into the USB outlet
of your computer or phone charger.
This should take several hours or less.
2. Insert the micro-SD card as shown.
You will feel a slight spring pressure
before it locks into place.
To remove card ensure your Dream
Master is turned off then gently press
the micro-SD card so that it unlatches
and springs out sufficiently to grasp.
3. Connect Light Goggles.
4. Connect supplied Earbuds or your
own Headphones.
5. Press and hold the Power button for
two seconds to turn Dream Master on.
6. Navigate using the Control Pad
to the “Sessions” icon and push the
“Select” button.
7. N a v i gate folders and sessions that
you wish to play using the Control Pad
Up, Down & Select.
8. Push Control Pad Select button to
start playing the session.
9. Adjust Earbuds/Headphones volume
and Light Goggles brightness level to
suit.
Congratulations!
You now own one of the most
advanced personal audio/visual
stimulation devices available.
We realise you are eager to get
started and always recommend
that you read the full Dream Master
manual if you have the time, which lists
all the advanced functionality.
At the very least, please read the
safety statements before continuing.
Specifically - DO NOT USE without
consulting your physician if you have
photo-induced epilepsy, have psychosis
or brain damage and/or you are taking
medication for same, are pregnant or
a minor. Do not use while driving a car
or operating machinery.
The Deepak Chopra Dream Master
manual is a great place for answers to
questions.
For additional support go to:
www.DeepakChopraDreamWeaver.com/
Pages/MasterSupport
Thank you from Deepak and all here at
Deepak Chopra Dream Weaver.
We hope you enjoy using your Dream
Master!
GETTING STARTED