Defy DAW 381 User manual

2820527768_EN / 19-07-19.(16:58)
Document Number

Washing Machine





washing








DAW 381

2 / EN Washing Machine / User’s Manual
1 General safety nstructons
This section includes security instructions which may help prevent
the injuries and material damage risks. All kinds of warranties shall
be invalid if these instructions are not observed.
1.1 Lfe and property safety
u
Never place the product on a carpet-covered floor. Electrcal parts
wll get overheated snce ar cannot crculate from under the devce.
Ths wll cause problems wth your product.
u
Unplug the product f t s not n use.
u
Always have the nstallaton and reparng procedures carred out by
the Authorsed Servce Agent. The manufacturer shall not be held
lable for damages that may arse from procedures carred out by
unauthorsed persons.
u
The water supply and dranng hoses must be securely fastened and
reman undamaged. Otherwse, water leak may occur.
u
Whle there s stll water nsde the product, never open the loadng
door or remove the flter. Otherwse, rsk of floodng and njury from
hot water wll occur.
u
Do not force open the locked loadng door. Door can be opened a few
mnutes after the washng cycle ends. In case of forcng the loadng
door to open, the door and the lock mechansm may get damaged.
u
Use detergents, softeners and supplements sutable for automatc
washng machnes only.
u
Follow the nstructons on the label of textles and the detergent
package.
1.2 Chldren's safety
u
Ths product can be used by the chldren who are at the age of 8 and
over and the people whose physcal, sensory or mental sklls are not
fully developed or who do not have necessary requred experence
and knowledge as long as they are supervsed or traned about the
safe use of the product and ts rsks. Chldren should not play wth the
devce. Cleanng and mantenance works should not be performed
by chldren unless they are supervsed by someone. Chldren of less
than 3 years should be kept away unless contnuously supervsed.
u
Packagng materals may be dangerous for the chldren. Keep
packagng materals n a safe place away from reach of the chldren.

Washing Machine / User’s Manual 3 / EN
u
Electrcal products are dangerous for the chldren. Keep the chldren
away from the product when t s n use. Do not allow them to play
wth the product. Use chld lock to prevent chldren from ntervenng
wth the product.
u
Do not forget to close the loadng door when leavng the room where
the product s located.
u
Store all detergents and addtves n a safe place away from the
reach of the chldren by closng the cover of the detergent contaner
or sealng the detergent package.
1.3 Electrcal safety
u
If the product has a falure, t should not be operated unless t s
repared by the Authorsed Servce Agent. Rsk of electrc shock!
u
Ths product s desgned to resume operatng n the event of
powerng on after a power nterrupton. If you wsh to cancel the
programme, see "Cancellng the programme" secton.
u
Plug the product nto a grounded outlet protected by a 16 A fuse. Do
not neglect to have the groundng nstallaton made by a qualfed
electrcan. Our company shall not be lable for any damages that
wll arse when the product s used wthout groundng n accordance
wth the local regulatons.
u
Do not wash the product by sprayng or pourng water onto t! Rsk of
electrc shock!
u
Never touch the power cable plug wth wet hands! Do not grab the
power cord to unplug the machne, always unplug t by holdng the
socket wth one hand, and pullng the plug wth the other hand.
u
Product should be unplugged durng nstallaton, mantenance,
cleanng and repar procedures.
u
If the power cable s damaged, t must be replaced by the
manufacturer, after sales servce or a smlarly qualfed person
(preferably an electrcan) or someone desgnated by the mporter n
order to avod possble rsks.
1.4 Hot surface safety
While washing the laundry at high
temperatures, the loading door glass
will get hot. Considering this fact, during
washing operation keep the children away
from the loading door of the product to
prevent them touching it.

4 / EN Washing Machine / User’s Manual
2 Important instructions for environment
2.1 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This product bears a
classification symbol for waste electrical and electronic equipment (WEEE).
This product has been manufactured with high quality parts and materials which can
be reused and are suitable for recycling. Do not dispose of the waste product with
normal domestic and other wastes at the end of its service life. Take it to the collection
center for the recycling of electrical and electronic equipment. Please consult your local
authorities to learn about these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain
harmful and prohibited materials specified in the Directive.
2.2 Package information
Packaging materials of the product are manufactured from recyclable materials in accordance with
our National Environment Regulations. Do not dispose of the packaging materials together with the
domestic or other wastes. Take them to the packaging material collection points designated by the
local authorities.
3 Intended use
 
be used out of its intended use.
 
 
 
to operate the appliance properly.

Washing Machine / User’s Manual 5 / EN
4 Technical specifications
Supplier name or trademark DEFY
Model name DAW 381
Rated capacity (kg) 6
Maximum spin speed (rpm) 800
Built-in No
Height (cm) 84
Width (cm) 60
Depth (cm) 49
Net weight (±4 kg.) 57
Single Water inlet / Double Water inlet • / -
• Available
Electrical input (V/Hz) 230 V / 50Hz
Total current (A) 10
Total power (W) 2200
Main model code 929

6 / EN Washing Machine / User’s Manual
4.1 Installation
 
 
installation is under customer's responsibility.
 
pinched or crushed while pushing the product into its place after installation or cleaning
procedures.
 

procedures carried out by unauthorised persons.
 
Damaged products cause risks for your safety.
4.1.1 Approprate nstallaton locaton
 
similar surfaces.
 

load carrying capacity!
 
 
 
 
 
them on the product.
4.1.2 Removng packagng renforcement (If the product has)
Tilt the machine backwards to remove the packaging
reinforcement. Remove the packaging reinforcement by pulling the
ribbon. Do not make this operation alone by yourself.
4.1.3 Removng the transportaton locks
 
2 Remove the transport safety bolts by turning them slightly.
3 Insert the plastic covers in the bag containing the user manual to the openings on the rear
panel.
A
CAUTION: Remove the transportation safety bolts before operating the washing machine! Otherwise, the
product will be damaged.
C
Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again
in the future.
Install the transport safety bolts in reverse order of the disassembly procedure.
Never move the product without the transportation safety bolts properly fixed in place!

Washing Machine / User’s Manual 7 / EN
4.1.4 Connectng water supply
C


pressure reducing valve if water pressure is higher.
A
CAUTION: 
laundry will get damaged or the product will switch to protection mode and will not operate.
CAUTION: Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.
1 Tighten the nuts of the hose by hand. Never use a tool when
tightening the nuts.
2 When hose connection is completed, check whether there is
leak problems at the connection points by opening the taps
fully. If any leaks occur, turn off the tap and remove the nut.
Retighten the nut carefully after checking the seal. In order to
prevent the water leaks and resultant damages, keep the taps
closed when you do not use the product.
4.1.5 Connectng the dran hose to the dran
 
A
CAUTION: Your drain house will be flooded if the hose comes out of its housing during water discharge.

make sure that the machine performs water intake and discharge processes without any problem, fix the drain
hose securely.
40 cm
100 cm

cm and a maximum height of 100 cm.

the floor level or close to the ground (less than 40 cm
above the ground), water discharge becomes more
difficult and the laundry may come out excessively
wet. Therefore, follow the heights described in the
figure.
 
immerse the end of the hose into the waste water or do not insert it into the drain for more than
15 cm. If it is too long, cut it short.
 
pinched between the drain and the machine.
 
hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the
extension hose and the drain hose of the product must be fitted well with an appropriate clamp as
not to come off and leak.

8 / EN Washing Machine / User’s Manual
4.1.6 Adjustng the feet
A
CAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level
and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its
place and cause crushing and vibration problems.
CAUTION: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.
 
2 Adjust the feet until the product stands in a stable and balanced way.
3. Tighten all lock nuts by hand again.
4.1.7 Electrcal connecton
Connect the product to a grounded outlet protected by a 16 A fuse. 
be liable for any damages that will arise when the product is used without grounding in
accordance with the local regulations.
 
 
Use of a Groud Fault Circuit Interrupter (GFCI) is recommended.
 
 
electrician install a 16 Amp fuse.
 
voltage.
 
B
CAUTION: Damaged power cables must be replaced by the Authorised Service Agents.
4.1.8 Intal use
Before starting to use the product make sure that the preparations
are made which are in line with the “Important Safety and
Environment Instructions” and the instructions in the “Installation”
section.
To prepare the product for washing laundry, perform first operation
in Drum Cleaning programme. If this program is not available in your
machine, apply the method which is described in the section 4.4.2.
C
Use an anti-limescale suitable for the washing machines.
Some water might have remained in the product due to the quality control processes in the production. It is not
harmful for the product.

Washing Machine / User’s Manual 9 / EN
4.2 Preparation
4.2.1 Sortng the laundry
* Sort laundry according to type of fabric, color, and degree of soiling and allowable water
temperature.
* Always obey the instructions given on the garment tags.
4.2.2 Preparng laundry for washng
 
will damage the machine. Remove the metal pieces or wash the clothes by putting them in a
laundry bag or pillow case.
 
out and brush. Such objects may damage the product or cause noise problem.
 
 
 
 
programme.
 
them separately.
 
 
Always follow the instructions on the package.
 
 
reduce pilling.
 
be shaken off before placing into the machine. Such dusts and powders on the laundry may build
up on the inner parts of the machine in time and can cause damage.
4.2.3 Thngs to be done for energy savng
Following information will help you use the product in an ecological and energy-efficient manner.
 
not overload; see, "Programme and consumption table". See, “Programme and consumption table"
 
 
 
 
 
washing process.
 
4.2.4 Loadng the laundry
1. Open the laundry cover.
2. Put the laundry items into the machine in a loose manner.
3. Push and close the loading cover until you hear the locking sound. Ensure that no items are caught
in the door. The loading door is locked while a programme is running. The door can only be opened
a while after the programme comes to an end.
4.2.5 Correct load capacty
The maximum load capacity depends on the type of laundry, the degree of soiling and the washing
programme desired.

A
WARNING: Follow the information in the “Programme and consumption table”. When overloaded, machine's


10 / EN Washing Machine / User’s Manual
4.2.6 Usng detergent and softener
C
When using detergent, softener, starch, fabric dye, bleacher and decolorant, descaling agents; read the
manufacturer's instructions written on the package and follow the dosages specified. Use measuring cup if
available.
1
3
2
The detergent drawer is composed of three
compartments:



 ) in addition, there is a siphon piece in the
softener compartment.
Detergent, softener and other cleaning agents
 
 
 
compartment (compartment nr. "1").
 
(compartment nr. "1").
 
the detergent bag or the dispensing ball directly among the laundry in the machine.
If you are using liquid detergent, do not forget to place the liquid detergent container into the main
wash compartment (compartment number “2”).
Choosing the detergent type
Detergent type to be used depends on the fabric type and color.
 
 
used solely for delicate clothes.
 
 
A
CAUTION: Use only detergents manufactured specifically for washing machines.
CAUTION: Do not use soap powder.
Adjusting detergent amount
The amount of washing detergent to be used depends on the amount of laundry, the degree of
soiling and water hardness.
 
to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental
protection.
 
Using softeners
Pour the softener into the softener compartment of the detergent drawer.
 
 

Washing Machine / User’s Manual 11 / EN
Using liquid detergents
If the product contains a liquid detergent cup:
2
2
 
compartment no “2”.
 
it with water before putting it into the
detergent container.
If the product is equipped with a liquid detergent part:
 
pull the apparatus towards yourself. The
part that falls down will serve as a barrier
for the liquid detergent.
 
when it is in place or by removing it.
 
apparatus must be secured at top position.
If the product does not contain a liquid detergent cup:
 
 
use the Delayed Start function, do not use liquid detergent.
Using gel and tablet detergent
 
detergent cup, put the gel detergent into the main wash detergent compartment during first
water intake. If your machine contains a liquid detergent cup, fill the detergent into this cup before
starting the programme.
 
into the drum before washing.
 
drum before washing.
Using starch
 
Do not use softener and starch together in a washing cycle.
Wipe the inside of the machine with a damp and clean cloth after using starch.
Using limescale remover
 
Using bleaches
 
detergent in the prewash compartment. As an alternative application, select a programme with
extra rinse and add the bleaching agent while the machine is taking water from the detergent
compartment during first rinsing step.
 
 
skin irritation. Do not pour the bleach onto the laundry and do not use it with the colored items.
 
temperature.
 
consistence, first put detergent in the compartment number “2” in the detergent dispenser and
wait for the machine to flush the detergent when taking in water. While the machine continues
taking in water, add decolorant in the same compartment.

12 / EN Washing Machine / User’s Manual
4.2.7 Tps for effcent washng
Clothes
Light Colours and
Whites Colours Black/Dark Colours
Delicates/
Woolens/Silks
(Recommended
temperature range based
on soiling level: 40-90 oC)
(Recommended
temperature range based
on soiling level: cold -40
oC)
(Recommended
temperature range
based on soiling
level: cold -40 oC)
(Recommended
temperature range
based on soiling
level: cold -30 oC)
Soiling Level
Heavily
Soiled
(difficult stains
such as grass,
coffee, fruits
and blood.)
It may be necessary to pre-
treat the stains or perform
prewash. Powder and liquid
detergents recommended
for whites can be used at
dosages recommended
for heavily soiled clothes.
It is recommended to use
powder detergents to
clean clay and soil stains
and the stains that are
sensitive to bleaches.
Powder and liquid
detergents recommended
for colors can be used at
dosages recommended
for heavily soiled clothes.
It is recommended to use
powder detergents to
clean clay and soil stains
and the stains that are
sensitive to bleaches.
Use detergents without
bleach.

suitable for
colors and dark
colors can be
used at dosages
recommended
for heavily soiled
clothes.
Prefer liquid
detergents
produced for
delicate clothes.
Woolen and silk
clothes must
be washed with
special woolen
detergents.
Normally
Soiled
(For example,
stains caused
by body on
collars and
cuffs)
Powder and liquid
detergents recommended
for whites can be used at
dosages recommended
for normally soiled
clothes.
Powder and liquid
detergents recommended
for colors can be used at
dosages recommended
for normally soiled
clothes. Detergents which
do not contain bleach
should be used.

suitable for
colors and dark
colors can be
used at dosages
recommended for
normally soiled
clothes.
Prefer liquid
detergents
produced for
delicate clothes.
Woolen and silk
clothes must be
washed with special
woolen detergents.
Lightly
Soiled
(No visible
stains exist.)
Powder and liquid
detergents recommended
for whites can be used at
dosages recommended
for lightly soiled clothes.
Powder and liquid
detergents recommended
for colors can be used at
dosages recommended
for lightly soiled clothes.
Detergents which do not
contain bleach should
be used.

suitable for
colors and dark
colors can be
used at dosages
recommended
for lightly soiled
clothes.
Prefer liquid
detergents
produced for
delicate clothes.
Woolen and silk
clothes must be
washed with special
woolen detergents.

Washing Machine / User’s Manual 13 / EN
4.3 Operating the product
4.3.1 Control panel
1 - Programme Selection knob (Uppermost
position On / Off)





7 - Start / Pause Button
8 - Delayed Start Setting Button
9 - Spin Speed Adjustment button
4.3.2 Preparng the machne

2.Plug in your machine.
3.Turn the tap on completely.
4.Place the laundry in the machine.
5.Add detergent and fabric softener.
4.3.3 Programme selecton and tps for effcent washng
1.Select the programme suitable for the type, quantity and soiling degree of the laundry in
accordance with the "Programme and consumption table" and the temperature table below.
2.Select the desired programme with the Programme Selection knob.
Rinse
Mini 30º Cottons 20º
Cottons 40º
Spin+Drain
Drum Clean
Synthetics 20º
Shirts 40º
Down Wear 40º
Cottons 60º
with Prewash
Cottons 90º
Synthetics 40º Wash
Spin
Rinse
Time Delay
End
Cancel
Woollens 40º
Hand Wash 40º Cottons Eco 40º
Cottons Eco 60º
9
6
3
700
600
400
800
Spin Start/
Pause
Time
Delay
12 3 4 6 5
789

14 / EN Washing Machine / User’s Manual
4.3.4 Programme and consumpton table
** :  (SANS 1695)
***: If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed.
- : See the programme description for maximum load.
** "Cotton Economic 40°C and Cotton Economic 60°C are standard programmes." These programmes are known as '40°C
cotton standard programme' and '60°C cotton standard programme' and indicated with the symbols on the
panel.
C
Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature,
ambient temperature, type and amount of laundry, spin speed, and changes in electric voltage.
Depending on the amount of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours
between the duration shown in the Programme and consumption table and the actual washing duration. Duration will
be automatically updated soon after the washing starts.
EN 2
Programme
Max. Load (kg) Programme Duration (~min) Water Consumption (l) Energy Consumption (kWh) Max. Speed***
Cottons
90 6 180 87 2,20 800
40 6 180 85 0,95 800
20 6 180 85 0,53 800
Cottons 60° with Prewash 60 6 200 95 1,80 800
Cottons Eco
60** 6 240 43,6 0,780 800
60** 3 178 37,3 0,580 800
40** 3 178 37,3 0,600 800
Synthetics 40 2,5 120 65 0,75 800
20 2,5 120 65 0,25 800
Mini 30 6 28 60 0,15 800
Woollens / Hand Wash 40 1,5 65 47 0,45 800
Down Wear 40 1,5 105 85 0,80 800
Shirts 40 2,5 80 42 0,60 800
Drum Clean 90 - 160 67 2,10 600

Washing Machine / User’s Manual 15 / EN
4.3.5 Man programmes
Depending on the type of fabric, use the following main programmes.
• Cottons
Use this programme for your cotton laundry (sheets, bedlinen, towels, bathrobes, underwear etc.).
Your laundry will be washed with vigorous washing action for a longer washing cycle.
• Synthetics
Use to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). Your laundry
will be washed with a gentle action for a shorter washing cycle when compared to the Cottons
programme. For curtains and tulle, it is recommended to use Synthetics 20˚C or 40˚C programme.
• Woollens / Hand Wash
Use to wash your woolen/delicate laundry. Your laundry will be washed with a very gentle washing
action in order not to damage the clothes.
"Woolens programme of this machine is approved by The Woolmark Company
for washing machine-washable woolen products provided that the products
are washed in accordance with the instructions on the product tag and the
instructions published by the manufacturer of this machine. "
In UK, Ireland, Hong Kong and India, the Woolmark trademark is a
Certification trademark.
4.3.6 Addtonal programmes
For special cases, additional programmes are available in the machine.
C
Additional programmes may differ according to the model of the machine.
• Cottons Eco
Use this programme to wash your laundry washable in cottons programme for a longer time, still
with a very good performance for saving purposes.
C
Cotton Eco programme consumes less energy compared to other cotton programmes.
• Cottons 60° with Prewash
Use this programme only for heavily soiled cotton clothes. Add detergent into the prewash
compartment.
• Mini
Use this programme to wash your lightly soiled cotton clothes in a short time.
• Shirts
This programme is used to wash the shirts made from cotton, synthetic and synthetic blended
fabrics altogether. It reduces wrinkles. Pre-treatment algorithm is executed.
 
when the machine starts to take water from the main washing compartment. Thus the machine will
wash them in a short period of time and expected lifespan of your shirts will extend.
• Down Wear
Use this programme to wash your coats, vest, jackets etc. containing feathers with a "machine-
washable" label on them. Thanks to special spinning profiles, it is ensured that the water reaches the
air gaps amongst the feathers.

16 / EN Washing Machine / User’s Manual
• Drum Clean
Use regularly (once in every 1-2 months) to clean the drum and provide the required hygiene.
Operate the programme while the machine is completely empty. To obtain better results, put
powder lime-scale remover for washing machines into the detergent compartment no. “2”. When the
programme is over, leave the loading door ajar so that the inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance programme.
Do not run the programme when there is something in the machine. If you try to do so, the machine detects that
there is load inside and aborts the programme.
4.3.7 Specal programmes
For specific applications, select any of the following programmes.
• Rinse
Use when you want to rinse or starch separately.
• Spin+Drain
You can use this function to remove the water on the garment of drain the water in the machine.
Before selecting this programme, select the desired spin speed and press Start / Pause button. First,
the machine will drain the water inside of it. Then, it will spin the laundry with the set spin speed and
drain the water coming out of them.
If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme
and then select the No Spin function with the help of Spin Speed Adjustment button. Press Start /
Pause button.
C
Use a lower spin speed for delicate laundries.
4.3.8 Speed selecton
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases
gradually. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear
on the display. When "No Spin" is selected, the rinse level indicator lights will not turn on.
Rinse hold
If you are not going to unload your clothes immediately after the programme completes, you can
use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from
getting wrinkled when there is no water in the machine. Press Start / Pause button after this process
if you want to drain the water without spinning your laundry. Programme will resume and complete
after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.
The programme will resume. Water is drained, laundry is spun and the programme is completed.
C
If the programme has not reached the spinning step, you can change the speed without switching the machine
to Pause mode.

Washing Machine / User’s Manual 17 / EN
4.3.9 Delayed Start
With the Delayed Start function the startup of the programme may be delayed up to 3, 6 or 9 hours.
C
Do not use liquid detergents when you set Delayed Start! There is the risk of staining of the clothes.
1. Open the loading door, place the laundry and put detergent, etc.
2. Select a washing programme and spin speed.
3. Set the desired time by pressing the Delayed Start button. When the button is pressed once, 3
hours delayed start is selected. When the same button is pressed again, 6 hours delay is selected,
and when it is pressed for the third time, 9 hours delayed start is selected. If you press the Delayed
Start button once again, Delayed Start function will be canceled.
4. Press Start / Pause button. Previous delayed start time light turns off and next delayed start time
light turns on after every 3 hours.
5. At the end of the countdown, all delayed start lights will turn off and the selected programme will start.
C
You can switch the machine to pause mode and add laundry during the delayed start period.
Changing the delayed start period
If you want to change the time during countdown, you will need to cancel the programme and set
the delay time again.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start the programme immediately:
1. Turn the Programme Selection knob to any programme. Thus, Delayed Start function will be
canceled. The End/Cancel light flashes continuously.
2. Then, select the programme you want to run again.
3. Press Start / Pause button to start the programme.
4.3.10 Startng the programme
1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.
4.3.11 Chld Lock

any changes in a running programme.
C



previously selected programme will continue running.


Programme Selection knob afterwards, the programme will resume.
To activate the Child Lock:
Press and hold Speed and Delayed Start buttons for 3 seconds. While you are holding for 3 seconds,

permanently on.
To deactivate the Child Lock:
Press and hold Speed and Delayed Start buttons for 3 seconds while any programme is running.


C

position when no programme is running, and select another programme.


18 / EN Washing Machine / User’s Manual
4.3.12 Progress of programme
Progress of a running programme can be followed from the Programme Follow-up indicator. At
the beginning of every programme step, the relevant indicator light will turn on and light of the
completed step will turn off.
You can change the speed settings without stopping the programme flow while the programme is
running. To do this, the change you are going to make must be in a step after the running programme
step. If the change is not compatible, relevant lights will flash for 3 times.
C
If the machine does not proceed to the spinning step, the Rinse Hold function might be active or the automatic
unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the
machine.
4.3.13 Loadng door lock
There is a locking system on the loading door of the machine that prevents opening of the loading
door in cases when the water level is unsuitable.


loading door can be opened within 1-2 minutes.


current programme. See. "Cancelling the programme"
4.3.14 Changng the selectons after programme has started
Switching the machine to pause mode
Press the Start / Pause button to switch the machine to pause mode while a programme is running.
The light of the step which the machine is in starts flashing in the Programme Follow-up indicator to
show that the machine has been switched to the pause mode.

Changing the speed settings
You can change the speed settings of the programme that is currently running. See "Speed
selection".
C
If no change is allowed, the relevant light will flash 3 times.
Adding or taking out laundry
You can load/unload laundry when a programme is running if the water level is appropriate to open
the door. To do this:
1. Press Start / Pause button to switch the machine to pause mode. The programme follow-up light
of the relevant step during which the machine was switched into the pause mode will flash.




6. Press Start / Pause button to start the machine.

Washing Machine / User’s Manual 19 / EN
4.3.15 Cancellng the programme
To cancel the programme, turn the Programme Selection knob to select another programme.
Previous programme will be cancelled. End / Cancel light will flash continuously to notify that the
programme has been canceled.
Your machine will end the programme when you turn the Programme Selection knob; however, it
does not drain the water inside. When you select and start a new programme, the newly selected
programme will start depending on the step the previous programme was canceled in. For example,
it may take in additional water or continue to wash with the water inside.
C
Some programmes may start by discharging the water inside the machine. Depending on the step where the
programme was canceled in, you may have to put detergent and softener again for the programme you have
selected anew.
4.3.16 End of programme

 
2. To switch off the machine, turn the Programme Selection Knob to On/Off position.
3. Take out your laundry and close the loading door. Your machine is ready for the next washing cycle.
4.3.17 Your machne features "Pause Mode".
After you switch on your machine with the programme selection button (by switching the button
to a different position than the On/Off position), if no programme is started or no other procedure
is performed in the selection step or no action is taken within approx. 2 minutes after the selected
programme ends, your machine will switch to energy saving mode automatically. The brightness of
the indicator lights will decrease. Also, if your product has a display that shows programme time, this
display will be completely turned off. If you turn the Programme Selection knob or touch any button,
lights and display will switch back to previous condition. The selections which you make when exiting
from the energy efficiency may change. Please check the correctness of your selections before
starting the programme. If necessary, please make your settings again. This is not an error.

20 / EN Washing Machine / User’s Manual
4.4 Maintenance and cleaning
Service life of product extends and frequently experienced problems will be reduced if it is cleaned at
regular intervals.
4.4.1 Cleanng the detergent drawer
Clean the detergent drawer at regular intervals (every 4-5 washing cycles)
as shown below in order to prevent accumulation of powder detergent in
time.

If more than normal amount of water and softener mixture starts to gather
in the softener compartment, the siphon must be cleaned.
1 Press the dotted point on the siphon in the softener compartment and pull towards you until
the compartment is removed from the machine.
2. Wash the detergent drawer and the siphon with plenty of lukewarm water in a washbasin.
In order to prevent the residues to contact your skin, clean it with an appropriate brush by
wearing a pair of gloves.
3 Insert the drawer back into its place after cleaning and make sure that it is seated well.
4.4.2 Cleanng the loadng door and the drum
For products with drum cleaning programme, please see Operating the product - Programmes.
C
Repeat Drum Cleaning process in every 2 months.
Use an detergent / anti-limescale suitable for the washing machines.
After every washing make sure that no foreign substance is left in the drum.
If the holes on the bellow shown in the figure is blocked, open the holes using
a toothpick.
Foreign metal substances will cause rust stains in the drum. Clean the stains
on the drum surface by using cleaning agents for stainless steel.
Never use steel wool or wire wool. These will damage the painted, chromated
and plastic surfaces.
4.4.3 Cleanng the body and control panel
Wipe the body of the machine with soapy water or non-corrosive mild gel detergents as necessary,
and dry with a soft cloth.
Use only a soft and damp cloth to clean the control panel.
4.4.4 Cleanng the water ntake flters
There is a filter at the end of each water intake valve at the rear of the machine and also at the
end of each water intake hose where they are connected to the tap. These filters prevent foreign
substances and dirt in the water to enter the washing machine. Filters should be cleaned as they do
get dirty.
1. Close the taps.
2. Remove the nuts of the water intake hoses to access
the filters on the water intake valves. Clean them
with an appropriate brush. If the filters are too dirty,
remove them from their places with a pliers and clean
in this way.
3. Take out the filters on the flat ends of the water
intake hoses together with the gaskets and clean
thoroughly under running water.
4. Replace the seals and filters carefully and tighten
their nuts by hand.