Del Mar Tide Watch User manual

calibre: ISA 8272
calibre: ISA 8272
calibre: ISA 8272
calibre: ISA 8272
calibre: ISA 8272
Battery Life
Notication
Battery Life
Notication
Battery Life
Notication
Battery Life
Notication
Battery Life
Notication
www.delmarwatches.com
www.delmarwatches.com
www.delmarwatches.com
www.delmarwatches.com
www.delmarwatches.com





DEL
MAR
Emtech La Costa Co.
DEL
MAR
Emtech La Costa Co.
DEL
MAR
Emtech La Costa Co.
DEL
MAR
Emtech La Costa Co.
DEL
MAR
Emtech La Costa Co.
Tide Watch User Manual
Tide Watch User Manual
Tide Watch User Manual
Tide Watch User Manual
Tide Watch User Manual
Tide amplitude and Moon phase counter
Hour hand
Tide cycle counter
Tide cycle hand Date window
Small second hand
Pushbutton B:
Tide cycle setting
Minute hand
Pushbutton A:
Tide amplitude and Moon phase setting
Crown
1 2 3
Tide amplitude and Moon phase counter
Hour hand
Tide cycle counter
Tide cycle hand Date window
Small second hand
Pushbutton B:
Tide cycle setting
Minute hand
Pushbutton A:
Tide amplitude and Moon phase setting
Crown
1 2 3
Tide amplitude and Moon phase counter
Hour hand
Tide cycle counter
Tide cycle hand Date window
Small second hand
Pushbutton B:
Tide cycle setting
Minute hand
Pushbutton A:
Tide amplitude and Moon phase setting
Crown
1 2 3
Tide amplitude and Moon phase counter
Hour hand
Tide cycle counter
Tide cycle hand Date window
Small second hand
Pushbutton B:
Tide cycle setting
Minute hand
Pushbutton A:
Tide amplitude and Moon phase setting
Crown
1 2 3
Tide amplitude and Moon phase counter
Hour hand
Tide cycle counter
Tide cycle hand Date window
Small second hand
Pushbutton B:
Tide cycle setting
Minute hand
Pushbutton A:
Tide amplitude and Moon phase setting
Crown
1 2 3
Time setting
1 ) Unscrew and pull crown out to Position 3.
2 ) Turn the crown to set the correct time.
*if hour hand passed 12:00 and date change
it is midnight 12:00 am, otherwise it is noon
12:00 pm.
3 ) Push crown back to Position 1 and screw in.
Date setting
1 ) Unscrew and pull the crown out
to position 2.
2 ) Turn the crown clockwise to set the date .
3 ) Push crown back to Position 1 and screw in.
1 2 3
SETTING THE TIME AND THE DATE
CAUTION: NEVER CORRECT DATE BETWEEN 9:00 PM AND 12:30 AM.
** After setting time, alway screw
back the crown by hand tightly
to keep the watch water resistant.
Time setting
1 ) Unscrew and pull crown out to Position 3.
2 ) Turn the crown to set the correct time.
*if hour hand passed 12:00 and date change
it is midnight 12:00 am, otherwise it is noon
12:00 pm.
3 ) Push crown back to Position 1 and screw in.
Date setting
1 ) Unscrew and pull the crown out
to position 2.
2 ) Turn the crown clockwise to set the date .
3 ) Push crown back to Position 1 and screw in.
1 2 3
SETTING THE TIME AND THE DATE
CAUTION: NEVER CORRECT DATE BETWEEN 9:00 PM AND 12:30 AM.
** After setting time, alway screw
back the crown by hand tightly
to keep the watch water resistant.
Time setting
1 ) Unscrew and pull crown out to Position 3.
2 ) Turn the crown to set the correct time.
*if hour hand passed 12:00 and date change
it is midnight 12:00 am, otherwise it is noon
12:00 pm.
3 ) Push crown back to Position 1 and screw in.
Date setting
1 ) Unscrew and pull the crown out
to position 2.
2 ) Turn the crown clockwise to set the date .
3 ) Push crown back to Position 1 and screw in.
1 2 3
SETTING THE TIME AND THE DATE
CAUTION: NEVER CORRECT DATE BETWEEN 9:00 PM AND 12:30 AM.
** After setting time, alway screw
back the crown by hand tightly
to keep the watch water resistant.
Time setting
1 ) Unscrew and pull crown out to Position 3.
2 ) Turn the crown to set the correct time.
*if hour hand passed 12:00 and date change
it is midnight 12:00 am, otherwise it is noon
12:00 pm.
3 ) Push crown back to Position 1 and screw in.
Date setting
1 ) Unscrew and pull the crown out
to position 2.
2 ) Turn the crown clockwise to set the date .
3 ) Push crown back to Position 1 and screw in.
1 2 3
SETTING THE TIME AND THE DATE
CAUTION: NEVER CORRECT DATE BETWEEN 9:00 PM AND 12:30 AM.
** After setting time, alway screw
back the crown by hand tightly
to keep the watch water resistant.
Time setting
1 ) Unscrew and pull crown out to Position 3.
2 ) Turn the crown to set the correct time.
*if hour hand passed 12:00 and date change
it is midnight 12:00 am, otherwise it is noon
12:00 pm.
3 ) Push crown back to Position 1 and screw in.
Date setting
1 ) Unscrew and pull the crown out
to position 2.
2 ) Turn the crown clockwise to set the date .
3 ) Push crown back to Position 1 and screw in.
1 2 3
SETTING THE TIME AND THE DATE
CAUTION: NEVER CORRECT DATE BETWEEN 9:00 PM AND 12:30 AM.
** After setting time, alway screw
back the crown by hand tightly
to keep the watch water resistant.
1 ) Press button Bfor 3 seconds , release when `beep` ,
now you enter the tide setting mode
2 ) Press Bagain to set the state of the local tide.
* Continuous pressing on Benables rapid setting to be
performed.
* After 3 seconds without pressing on B, a beep indicates
exit from setting mode.
The tide cycle takes place over one revolution of the dial in
12 hours 25 minutes and 14 seconds. High tide corresponds
to the "12 o'clock" position and low tide corresponds to the
opposite position, hence "6 o'clock".
push button B
SETTING THE TIDE FUNCTION - central hand
1 ) Press button Bfor 3 seconds , release when `beep` ,
now you enter the tide setting mode
2 ) Press Bagain to set the state of the local tide.
* Continuous pressing on Benables rapid setting to be
performed.
* After 3 seconds without pressing on B, a beep indicates
exit from setting mode.
The tide cycle takes place over one revolution of the dial in
12 hours 25 minutes and 14 seconds. High tide corresponds
to the "12 o'clock" position and low tide corresponds to the
opposite position, hence "6 o'clock".
push button B
SETTING THE TIDE FUNCTION - central hand
1 ) Press button Bfor 3 seconds , release when `beep` ,
now you enter the tide setting mode
2 ) Press Bagain to set the state of the local tide.
* Continuous pressing on Benables rapid setting to be
performed.
* After 3 seconds without pressing on B, a beep indicates
exit from setting mode.
The tide cycle takes place over one revolution of the dial in
12 hours 25 minutes and 14 seconds. High tide corresponds
to the "12 o'clock" position and low tide corresponds to the
opposite position, hence "6 o'clock".
push button B
SETTING THE TIDE FUNCTION - central hand
1 ) Press button Bfor 3 seconds , release when `beep` ,
now you enter the tide setting mode
2 ) Press Bagain to set the state of the local tide.
* Continuous pressing on Benables rapid setting to be
performed.
* After 3 seconds without pressing on B, a beep indicates
exit from setting mode.
The tide cycle takes place over one revolution of the dial in
12 hours 25 minutes and 14 seconds. High tide corresponds
to the "12 o'clock" position and low tide corresponds to the
opposite position, hence "6 o'clock".
push button B
SETTING THE TIDE FUNCTION - central hand
1 ) Press button Bfor 3 seconds , release when `beep` ,
now you enter the tide setting mode
2 ) Press Bagain to set the state of the local tide.
* Continuous pressing on Benables rapid setting to be
performed.
* After 3 seconds without pressing on B, a beep indicates
exit from setting mode.
The tide cycle takes place over one revolution of the dial in
12 hours 25 minutes and 14 seconds. High tide corresponds
to the "12 o'clock" position and low tide corresponds to the
opposite position, hence "6 o'clock".
push button B
SETTING THE TIDE FUNCTION - central hand
The Del Mar Tide Watch approximates the tides based
on average intervals and lunar cycles.
Local tides can vary from the levels indicated on the
display especially in certain portions of the West Coast
of Florida that don't have two tides per day.
For customer guidance in Tide predictions,
we recommend using this updated web site:
http://www.tidesandcurrents.noaa.gov/curr_pred.html
The Del Mar Tide watch should never be used for navigation.
Note for Del Mar Tide Watch
The Del Mar Tide Watch approximates the tides based
on average intervals and lunar cycles.
Local tides can vary from the levels indicated on the
display especially in certain portions of the West Coast
of Florida that don't have two tides per day.
For customer guidance in Tide predictions,
we recommend using this updated web site:
http://www.tidesandcurrents.noaa.gov/curr_pred.html
The Del Mar Tide watch should never be used for navigation.
Note for Del Mar Tide Watch
The Del Mar Tide Watch approximates the tides based
on average intervals and lunar cycles.
Local tides can vary from the levels indicated on the
display especially in certain portions of the West Coast
of Florida that don't have two tides per day.
For customer guidance in Tide predictions,
we recommend using this updated web site:
http://www.tidesandcurrents.noaa.gov/curr_pred.html
The Del Mar Tide watch should never be used for navigation.
Note for Del Mar Tide Watch
The Del Mar Tide Watch approximates the tides based
on average intervals and lunar cycles.
Local tides can vary from the levels indicated on the
display especially in certain portions of the West Coast
of Florida that don't have two tides per day.
For customer guidance in Tide predictions,
we recommend using this updated web site:
http://www.tidesandcurrents.noaa.gov/curr_pred.html
The Del Mar Tide watch should never be used for navigation.
Note for Del Mar Tide Watch
The Del Mar Tide Watch approximates the tides based
on average intervals and lunar cycles.
Local tides can vary from the levels indicated on the
display especially in certain portions of the West Coast
of Florida that don't have two tides per day.
For customer guidance in Tide predictions,
we recommend using this updated web site:
http://www.tidesandcurrents.noaa.gov/curr_pred.html
The Del Mar Tide watch should never be used for navigation.
Note for Del Mar Tide Watch
P. 1
P. 2
P. 3
P. 5
P. 6
P. 7
The tide amplitude counter performs one revolution
in 29 days 12 hours and 44 minutes.
1 ) Press button Afor 3 seconds , release when `beep` ,
now you are enter the MOON PHASES setting mode
2 ) Press Aagain to set the tide amplitude corresponding
to the moon phase.
* Continuous pressing on Aenables rapid setting to be
performed.
* After 3 seconds without pressing on A, a beep indicates
exit from setting mode.
Comment :
The moon phases hand will start with its setting time,
jumps step forward every 24 hours.
The tide amplitude counter performs one revolution
in 29 days 12 hours and 44 minutes.
1 ) Press button Afor 3 seconds , release when `beep` ,
now you are enter the MOON PHASES setting mode
2 ) Press Aagain to set the tide amplitude corresponding
to the moon phase.
* Continuous pressing on Aenables rapid setting to be
performed.
* After 3 seconds without pressing on A, a beep indicates
exit from setting mode.
Comment :
The moon phases hand will start with its setting time,
jumps step forward every 24 hours.
The tide amplitude counter performs one revolution
in 29 days 12 hours and 44 minutes.
1 ) Press button Afor 3 seconds , release when `beep` ,
now you are enter the MOON PHASES setting mode
2 ) Press Aagain to set the tide amplitude corresponding
to the moon phase.
* Continuous pressing on Aenables rapid setting to be
performed.
* After 3 seconds without pressing on A, a beep indicates
exit from setting mode.
Comment :
The moon phases hand will start with its setting time,
jumps step forward every 24 hours.
The tide amplitude counter performs one revolution
in 29 days 12 hours and 44 minutes.
1 ) Press button Afor 3 seconds , release when `beep` ,
now you are enter the MOON PHASES setting mode
2 ) Press Aagain to set the tide amplitude corresponding
to the moon phase.
* Continuous pressing on Aenables rapid setting to be
performed.
* After 3 seconds without pressing on A, a beep indicates
exit from setting mode.
Comment :
The moon phases hand will start with its setting time,
jumps step forward every 24 hours.
The tide amplitude counter performs one revolution
in 29 days 12 hours and 44 minutes.
1 ) Press button Afor 3 seconds , release when `beep` ,
now you are enter the MOON PHASES setting mode
2 ) Press Aagain to set the tide amplitude corresponding
to the moon phase.
* Continuous pressing on Aenables rapid setting to be
performed.
* After 3 seconds without pressing on A, a beep indicates
exit from setting mode.
Comment :
The moon phases hand will start with its setting time,
jumps step forward every 24 hours.
push button
A
push button
A
push button
A
push button
A
push button
A
push button
push button
push button
push button
push button
SETTING THE TIDE AMPLITUDE (MOON PHASES) - COUNTER AT 10 O’CLOCK
SETTING THE TIDE AMPLITUDE (MOON PHASES) - COUNTER AT 10 O’CLOCK
SETTING THE TIDE AMPLITUDE (MOON PHASES) - COUNTER AT 10 O’CLOCK
SETTING THE TIDE AMPLITUDE (MOON PHASES) - COUNTER AT 10 O’CLOCK
SETTING THE TIDE AMPLITUDE (MOON PHASES) - COUNTER AT 10 O’CLOCK
P. 4
• When the watch is under water or wet, never use the pushers/bezels, or set
the time. Watch case and metal bracelet should be rinsed thoroughly in fresh
water after being in salt water.
• No backward hand, or date, adjustments should not be made when the hands
read between 9:00pm and 12:30am. At these times, the gears are too close
together and such a change could cause damage.
• No hot tub/sauna. Please do not take your Del Mar watch into the Hot Tub or
Sauna. The combination of extreme heat and water may cause your watch to
lose some of its water resistance.
200 meters/650 feet
Caseback
marking
500 meters/1650 feet
1000 meters/3300 feet
Water resistant
characteristics
Suitable for normal
Scuba Diving
Suitable for Deep Diving
Suitable for Deep Diving
Scuba
Diving
Water related use
Indication
YES
YES
YES1000m
500m
200m
Depth
• When the watch is under water or wet, never use the pushers/bezels, or set
the time. Watch case and metal bracelet should be rinsed thoroughly in fresh
water after being in salt water.
• No backward hand, or date, adjustments should not be made when the hands
read between 9:00pm and 12:30am. At these times, the gears are too close
together and such a change could cause damage.
• No hot tub/sauna. Please do not take your Del Mar watch into the Hot Tub or
Sauna. The combination of extreme heat and water may cause your watch to
lose some of its water resistance.
200 meters/650 feet
Caseback
marking
500 meters/1650 feet
1000 meters/3300 feet
Water resistant
characteristics
Suitable for normal
Scuba Diving
Suitable for Deep Diving
Suitable for Deep Diving
Scuba
Diving
Water related use
Indication
YES
YES
YES1000m
500m
200m
Depth
• When the watch is under water or wet, never use the pushers/bezels, or set
the time. Watch case and metal bracelet should be rinsed thoroughly in fresh
water after being in salt water.
• No backward hand, or date, adjustments should not be made when the hands
read between 9:00pm and 12:30am. At these times, the gears are too close
together and such a change could cause damage.
• No hot tub/sauna. Please do not take your Del Mar watch into the Hot Tub or
Sauna. The combination of extreme heat and water may cause your watch to
lose some of its water resistance.
200 meters/650 feet
Caseback
marking
500 meters/1650 feet
1000 meters/3300 feet
Water resistant
characteristics
Suitable for normal
Scuba Diving
Suitable for Deep Diving
Suitable for Deep Diving
Scuba
Diving
Water related use
Indication
YES
YES
YES1000m
500m
200m
Depth
• When the watch is under water or wet, never use the pushers/bezels, or set
the time. Watch case and metal bracelet should be rinsed thoroughly in fresh
water after being in salt water.
• No backward hand, or date, adjustments should not be made when the hands
read between 9:00pm and 12:30am. At these times, the gears are too close
together and such a change could cause damage.
• No hot tub/sauna. Please do not take your Del Mar watch into the Hot Tub or
Sauna. The combination of extreme heat and water may cause your watch to
lose some of its water resistance.
200 meters/650 feet
Caseback
marking
500 meters/1650 feet
1000 meters/3300 feet
Water resistant
characteristics
Suitable for normal
Scuba Diving
Suitable for Deep Diving
Suitable for Deep Diving
Scuba
Diving
Water related use
Indication
YES
YES
YES1000m
500m
200m
Depth
• When the watch is under water or wet, never use the pushers/bezels, or set
the time. Watch case and metal bracelet should be rinsed thoroughly in fresh
water after being in salt water.
• No backward hand, or date, adjustments should not be made when the hands
read between 9:00pm and 12:30am. At these times, the gears are too close
together and such a change could cause damage.
• No hot tub/sauna. Please do not take your Del Mar watch into the Hot Tub or
Sauna. The combination of extreme heat and water may cause your watch to
lose some of its water resistance.
200 meters/650 feet
Caseback
marking
500 meters/1650 feet
1000 meters/3300 feet
Water resistant
characteristics
Suitable for normal
Scuba Diving
Suitable for Deep Diving
Suitable for Deep Diving
Scuba
Diving
Water related use
Indication
YES
YES
YES1000m
500m
200m
Depth
Characteristics :
Tide analogical / electronic movement. Rotating stepping motors.
Date, quick date correction.
Small second, 1 step per second.
Notication end of battery life (EOL): indication by small second hand at 2:00
jumping 4 successive steps every 4 seconds.
Indication of the tide state, semi-diurnal.
Tide : The center sweep hand makes 1 revolution in 12 hours 25 minutes 14 seconds.
Tide amplitude: The small counter hand makes 1 revolution in 29 days 12 hours 44
minutes.
Movement : SWISS MADE ISA 8272
Operating temperature : 0 °C --- 50 °C
Accuracy : ± 0.5 sec/day/25 °C
Battery : SR927SW / 395
Battery life : approx. 39 months
SERVICE
Emtech La Costa Co.
Del Mar service dept.
1320 State Rt 9 #26
Champlain, NY 12919
Characteristics :
Tide analogical / electronic movement. Rotating stepping motors.
Date, quick date correction.
Small second, 1 step per second.
Notication end of battery life (EOL): indication by small second hand at 2:00
jumping 4 successive steps every 4 seconds.
Indication of the tide state, semi-diurnal.
Tide : The center sweep hand makes 1 revolution in 12 hours 25 minutes 14 seconds.
Tide amplitude: The small counter hand makes 1 revolution in 29 days 12 hours 44
minutes.
Movement : SWISS MADE ISA 8272
Operating temperature : 0 °C --- 50 °C
Accuracy : ± 0.5 sec/day/25 °C
Battery : SR927SW / 395
Battery life : approx. 39 months
SERVICE
Emtech La Costa Co.
Del Mar service dept.
1320 State Rt 9 #26
Champlain, NY 12919
Characteristics :
Tide analogical / electronic movement. Rotating stepping motors.
Date, quick date correction.
Small second, 1 step per second.
Notication end of battery life (EOL): indication by small second hand at 2:00
jumping 4 successive steps every 4 seconds.
Indication of the tide state, semi-diurnal.
Tide : The center sweep hand makes 1 revolution in 12 hours 25 minutes 14 seconds.
Tide amplitude: The small counter hand makes 1 revolution in 29 days 12 hours 44
minutes.
Movement : SWISS MADE ISA 8272
Operating temperature : 0 °C --- 50 °C
Accuracy : ± 0.5 sec/day/25 °C
Battery : SR927SW / 395
Battery life : approx. 39 months
SERVICE
Emtech La Costa Co.
Del Mar service dept.
1320 State Rt 9 #26
Champlain, NY 12919
Characteristics :
Tide analogical / electronic movement. Rotating stepping motors.
Date, quick date correction.
Small second, 1 step per second.
Notication end of battery life (EOL): indication by small second hand at 2:00
jumping 4 successive steps every 4 seconds.
Indication of the tide state, semi-diurnal.
Tide : The center sweep hand makes 1 revolution in 12 hours 25 minutes 14 seconds.
Tide amplitude: The small counter hand makes 1 revolution in 29 days 12 hours 44
minutes.
Movement : SWISS MADE ISA 8272
Operating temperature : 0 °C --- 50 °C
Accuracy : ± 0.5 sec/day/25 °C
Battery : SR927SW / 395
Battery life : approx. 39 months
SERVICE
Emtech La Costa Co.
Del Mar service dept.
1320 State Rt 9 #26
Champlain, NY 12919
Characteristics :
Tide analogical / electronic movement. Rotating stepping motors.
Date, quick date correction.
Small second, 1 step per second.
Notication end of battery life (EOL): indication by small second hand at 2:00
jumping 4 successive steps every 4 seconds.
Indication of the tide state, semi-diurnal.
Tide : The center sweep hand makes 1 revolution in 12 hours 25 minutes 14 seconds.
Tide amplitude: The small counter hand makes 1 revolution in 29 days 12 hours 44
minutes.
Movement : SWISS MADE ISA 8272
Operating temperature : 0 °C --- 50 °C
Accuracy : ± 0.5 sec/day/25 °C
Battery : SR927SW / 395
Battery life : approx. 39 months
SERVICE
Emtech La Costa Co.
Del Mar service dept.
1320 State Rt 9 #26
Champlain, NY 12919
P. 8