Delta Flux DF L PX C PRO User manual

.
Delta Flux Impianti srl
Sede operativa:
Via per Airuno, 23 – 23883 BRIVIO (LC) Italy
Tel + 39 039-532.13.86 – Fax [phone]
[email protected] www.deltaflux.it
P. IVA 02554110136
Operation Manual
DF L PX C PRO
DF L PX C PRO lamp with Camera is a hand-held UV LED Lamp with white light and UV
light emissions as per to ASTM E3022.
Lamp has 12.8 Mega-Pixel HD Camera with UV filter and is a good mate to take photos or
videos for the cracks. The intelligen operation system is Android 4.4 and the data can be
transmitted via Built-in Wi-Fi or Micro-USB.
Professional UV LED lamp, with 3 UV LEDs and a white light LED. Each UV LED is
covered with black light filter. With interchangeable Lens and Filters.
Can be powered both by electrical mains and built-in batteries with battery indicator.

1. UNPACKING THE EQUIPMENT
Check whether the lamp is damage or not during transport. In the event of external
damage to the product, contact the company responsible for transport and your supplier
immediately before use. Make sure that no part is missing. If some of the part is missing,
please contact your supplier for help as soon as possible.
2. TRANSPORTATION OF THE EQUIPMENT
When the lamp is not in use, especially when the lamp is being shipped, be sure not to
mount battery inside the lamp in order to avoid the lamp being unintentionally switched on.
3. HANDLING OF THE EQUIPMENT / INTENDED USE
Although the lamp is sturdily made, in view of the expensive electronic components it
composed of, it should be treated with certain amount of care.
Exterior surfaces should be cleaned with a soft lint free cloth and mild detergebnt, and the
UV filters be treated with clean cloth and glass washing agent. Do not disassemble the
unit for cleaning without well training by professionals. Disassemble of lids may lead to
termination of warrenty.
The lamp can be switched on and off at any interval. After white light inspection, keep in
mind that dark vision (scotopic vision) is temporarily lost and operators has to be in dark
environment for at least 30 seconds to regain dark adaptation. Refer to your industrial
standard for more detaild information.
Make sure the unit has good ventilation. Do not mount the unit in a close compartment
and cover any part of the unit. The unit is cooled by convection by surrounding air, thus
removing all obstacles for efficien convection.
UV LED lamp is intended for handheld use or hung by a hook or mounted on a bracket.
Lamp is intended to irradiante and inspection surface.
UV LED lamp should always wear UV blocking eye protection.

4. OPERATING INSTRUCTIONS
UV LED lamp can be powered both by electrical mains and built-in batteries.
MAINS OPERATED
*Mains voltage: 100-240V 50/60 Hz
*Output voltage: 12V DC
*Effect: 12W
Mounting:
1. Mount the lamp in a dry location
2. Connect mains cable to mains outlet
BATTERY OPERATED
The battery is 18650 Li-ion battery. Two batteries are required to operate lamp.
Mounting:
1. Mount the batteries in the handle
Warning!
Please make sure that positive and negative pole of the battery is right!
2. Open lid for battery slot by unscrewing the screws
3. Batteries lids into slot
4. Mind polarity of batteries
5. Mount lid by screwing it back on to handle
Charging
Charging by connecting mains cable to mains outlet.
Charging the batteries in external battery charger:
1. Dismount batteries by unscrewing the lid on handle
2. Remove batteries from slot
3. Batteries shall be mounted in charger
4. Mind polarity of batteries
5. Put AC/DC adapter in mains outlet
Operation
The lamp can be operated by mains (AC) and batteries. During the connection and
disconnecting procedure, the lamp has to be shut-off. After this procedure the lamp can be
operated as usual.

Function description
UV radiation: press the power button at the front of the handle for more than 3 seconds to
activate UV radiation.
White light: press the power button to turn the UV radiation to the white light illumination.
To turn off, press the power button in the front of the handle for more than 3 seconds.
Camera function: the button on the back of the lamp is to control the camera function. The
buttons from left to right are Power/Next/Enter/Back.
Press the power button on the rear of the LED UV lamp to turn on the Android system.
Then press the second button to turn to the next item.
Press the third button to enter.
Press the last button to go back.
There is also a mini USB on the rear of the lamp.
Press the button on the rear of the handle to take photos.
Interchangeable Lens and Filters: meet demanding and specific photographing needs.
Screw the lens on the front of the DF L PX C PRO lamp.

5. TECHNICAL DATA
Application Data
Model DF L PX C PRO
LED 3 UV LEDs, 1 White light LED
UV-A Irradiation (at 380 mm) With blackight filter: ~4500 µW/cm
2
Visible light < 5 Lux
Peak wavelenght 365-370 nm
Wavelenght Drift (at elevated temperature) ≤5 nm
Emission Spectrum
Full Width at Half Maximum (FWHD)
Longest Wavelenght at Half Max (LWHM)
+/- Width at Half Maximum
Full Width at 10% Maximum (FW10%)
+/- Width at 10% Maximum
≤15 nm
≤377 nm
≤± 8 nm
≤25 nm
≤± 12 nm
Minimum Beam Diameter 180 mm ( > 1,000 µW/cm
2
UV-A intensity)
260 mm ( > 200 µW/cm
2
UV-A intensity)
Minimum Working Distances WD ≤13 nm
Weight 880 g
Input voltage Mains: 110-240V 50/60Hz
Battery Operating time: ~ 1h 30 min
Input power 9W
UV-A radiation Total: 2 W
Ambient Conditions
Operating temperature 41 – 113° F 5 – 45° C
Storage temperature 41 – 113° F 5 – 55° C
Humidity during operation Maximum 90% relative
Humidity (non-condensing)
Air humidity storage Maximum 90% relative
Humidity (non-condensing)
Emissions
UV radiation No UV-B or UV-C radiation generated
Visible light Visibile light emission less than 5 Lux
(1 ft-candle)
For information about other spare parts and accessories, please ask to: [e-mail]

6. WARNING AND SAFETY
Warning!
General UV Safety Information
Unprotected and prolonged exposure to any form of UV light, including UV-A, can be resul
in skin injures, cataracts and possibility cancer. Even brief exposure can be hazardous if
the UV intensity is very high. Thus, it is advised to always shield the eyes/face. For
maximum protection and whnever possible, hands and arms should be covered with long
sleeves and gloves of a non-fluorescent material.
Artifical UV light
Artificial UV light is often regarded as something completely different from the sun’s
radiation. Recommended hygienic exposure times have been calculated for these types of
UV sources, the aim being to prevent injuries and increase safety awareness when
working with artificial UV. Artificial UV, such as that emitted from UV lamps, should be
regarded as natural UV, i.e. sunlight and appropriate safety measures should be taken
accordingly. Artificial UV source are used in many industries for many applications. UV is
used in combination with a fluorescent media, which is excited by the UV energy and
“reflects” light in the visible range of the electromagnetic spectrum
Sensitivity
Certain individual are naturally hypersensitive to all forms of UV and should avoid
andyexposure. In general, if itching, inflammation or other unusual symptoms occu, UV
exposure should cease immediately. People using certain drugs that produce photo
sensitivity shoulp avoid exposure to all UV sources.
Safety Standard
According to EN 62471, comply with Risk Class 2, Moderate Risk.
Heat
Unit generates heat that needs to dissipate though convection. Do not cover unit when
operating.

Ultraviolet radiation can cause damage to skin and eyes. See the
following recommendations:
- Do not look directly into the UV-LED light beam
- Never use optical focus devices, such as magnifying glasses,
tele-scopes or microscopes, to look into the light beam. In this
context, corrective glasses are not included in focusing optical devices.
- Do not direct the UV-LED beam against other people
- Always position the UV-LED light below eye-level
- Avoid skin contact. Wear body-covering work clothes and suitable gloves or lotions
with a high UV protection factor
- Access to the light’s zone of activity should be restricted to trained personnel
- Wear suitable eyw protection (UV safety glasses), due to reflection of UV-LED light,
damage to the eyes can occur without looking directly into the lamp
- Only authorized and trained personnel should be allowed within the work area
7. UV LIGHT SOURCE PERFORMANCE
The UV LED light source is a specifically designed UV LED. The spectrum is strictly focus
on 365-370 nm with a peak at 365 nm, creates an effect with an unbeatable response
from any fluorescent media.
UV is Dangerous – Protect yourself!
UV Goggles: it is of utter importance to use the UV protection. To protect your eyes, use
UV Blocking Goggles. There are different goggles on the market. Enclosed with this lamp
you will find UV safety Glogger that absorbs 99.9% of all UV up to 385 nm.
Visor: to take extra caution, use a UV block visor.
Gloves: be sure to use gloves that protect you not only from chemicals or cut, but from UV,
and make sure that they do not fluoresce.
Apron: to protect your body in the best way, please use ad industry apron with 100% UV
block.

8. WARRANTY
Delta Flux guaranties that the armatures will be free from defects in manufacture when
delivered. Obligation of Delta Flux under this warranty is limited to reparing or replacing, at
the option of Delta Flux, any part(s) of the product which, if properly installed, used and
maintained, proves upon factory examination to have been defective in material or
workmanship. The warranty does not apply to any product or part which:
- Is normally consumed in operation
- Has a normal life inherently shorter than the stated warrenty.
In no event shall Delta Flux be liable for special, indirect, incidental or consequential
damages, not for any damages arising out of delay in shipment or production.
- Warranty is 12 months from date of purchase.
- An invoice that shows the actual date of when the lamp was purchased, as well as
the serial number of the actual unit must be enclosed in the shipment in order to be
able to claim warranty.
Warranty for repaired UV LED lamps
The warranty for UV LED lamps repaired by Delta Flux is 12 months from date it is
shipped, only for repareid spare parts.
Freight
*For products not under warranty, it is the responsibility of the customer to pay for the
freight costs to and from Delta Flux.
*For products under warranty, it is responsibility of the customer to pay the freight costs to
Delta Flux. Return fright costs for goods under warranty are paid by Delta Flux.
*The method of shipment and choice orf carries is left to the discreation of the company
bearing said freight costs.
Repairs
*If your Lamp needs service or repair, you can send your lamp to Delta Flux.

9. DECLARATION OF CONFORMITY
This declaration of conformity is according to product safety IEC/EN 61010-1. And
equipment has been certificated in according with ASTM E3022, ASTM E14147,
ANSI/NCSL Z540-1-1994, Rolls Royce: RRES 90061.
Type of equipment: electrical equipment for control
Brand name or trade mark: CrackCheck
Type destination: Phoenix series led uv lamp
Manufacturer: CHiNDT
Distributor: Delta Flux
Standards Test report issued by Regarding
EN61010-1 NTEK Safety
EN55015 NTEK EMC
EN61547 NTEK EMC
EN60598 IP43 NTEK Enclosure
EN62471 NTEK Optical
Additional information: the product complies with the harmonized European safety
standards listed above.
10.STORAGE
The lamp can be stored in its carrying case without special measures according to the
ambient specified in the technical data.