DG DISPLAYS2GO User manual
Digital artDigital art
FrameFrame
easel - 32”easel - 32”
SKU: DIGCOM32
Aemy InructionsAemy Inructions
Letter represents the hardware. Number is equal to the quantity of each part.
NOTE: Assembly will require Phillips head screwdriver.
1. Install the body of the easel and connect the horizonal
and vertical rods with screws.
2. Check the front and back side of the body of the easel
to ensure that it is properly installed. Compare against
the image above.
3. Connect the vertical bar to the train and install the
latch, as pictured.
4. Using screw and bracket C-1, assemble the
supporting bar between the body of the easel and the
supporting leg. (Tilt angle can be adjusted by sliding the
screws.)
5. Connect the vertical bar to the tray and install the
latch, as shown.
6. Assemble the tray and the body of the easel. Height of
easel can be adjusted by sliding the latch.
7. Install the fixing tray and lock it, as shown.
Scan QR code to visit product page.
How to Adjust Height and Tilt Angle of Easel
Adjust tilt angle by sliding the
screws.
Adjust height of easel by sliding the
latch.
If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2G
customer service at 844-221-3388.
This manual suits for next models
1
