DiBoss LCD-TV LT-40H6MVH User manual

P/N: 500-087G

Wide LCD-TV
Instruction Manual
Please read this manual carefully before operating your set.
●LT-40H6MVH
●
LT-40T6MVH
●
LT-46T6MVH

Warnings
Warnings
3
TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THE SET TO RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER:
This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of
the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be connected to the grounding system of
the building, as close to the point of the cable entry as practical.
REGULATORY INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B
DIGITAL device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
residential Installation. This equipment generates, uses and can radiate radio frequency
energy and, if Not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If
this equipment does cause harmful interference to radio or television
reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Do not attempt to modify this product in any way without written authorization. Unauthorized
modification could void the user’s authority to operate this product.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING :
The unit is operated at dangerous
voltages. The unit may only be
opened by an authorised specialist.
All maintenance and servicing work
must be carried out by an
authorised company. Repairs that
are carried out incorrectly could
result in fatal injuries to the user.

4
Warnings
Warnings
Cleaning
Unplug the TV before cleaning the face of the LCD Screen. Dust the TV by wiping the screen
and cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean,
damp cloth. Do not use liquid or aerosol cleaners.
POWER
The main plug should be inserted fully into the power outlet to avoid a fire hazard.
Hold the plug firmly when unplugging. If you pull the cord, the cord may be damaged.
Prevent dust collecting on the power plug pins or outlet. And do not use too many
plugs on the Mains multi-outlet. It may result in overheating of the outlet and causes
a fire hazard.
Never touch the power plug with a wet hand. This may cause an electric shock hazard.
Unplug the set from the wall outlet when it is left unattended and unused for long
periods of time. Accumulated dust may cause a fire or an electric shock from
deterioration or electric leakage.
Trademark Information
This TV incorporates High-Definition Multimedia
Interface (HDMI)™ technology.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
The logo “HD ready” is a trademark of EICTA.
The logo “HD ready” is awarded to display equipment
capable of presenting HD sources with a
much higher resolution than standard PAL (576i).
WOW, SRS and ®symbol are trademarks of SRS
Labs, Ins.
SRS WOW technology is incorporated under license
from SRS Labs, Inc.

5
Warnings
Warnings
Safety
This LCD TV have been engineered and manufactured to assure your safety.
You can prevent serious electrical shock and other hazards by keeping in mind the following.
Do not place anything heavy, wet or magnetic on the LCD TV or the power cord.
Never cover the ventilation openings with any material and never touch them with metallic or
inflammable materials.
Avoid operating the LCD TV in extreme heat, humidity or areas affected by dust.
+ Temperature:0~50 ºC + Humidity:20~90RH
Be sure to turn the LCD TV off before plugging the power cord into the socket.
Make sure that the power cord and the other cords are securely and correctly connected.
Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and
broken plugs, which may cause electric shock or fire.
Call your service technician for replacement.
Do not sharp tools such as a pin or a pencil near the LCD TV, as they may scratch the LCD
surface.
Do not use a solvent, such a benzene, to clean the LCD TV, as it will damage the LCD surface.
The apparatus shall not be exposed to dripping or splashing.
TV Wall mounting bracket
Use the following appliance(s) only with the following wall mounting bracket. Use with other Wall
mounting bracket may cause instability and result in possible injury.
APPLIANCE MODEL NO:
LT-40T6MVH
LT-40H6MVH
LT-46T6MVH
TV WALL MOUNTING BRACKET MODEL NO:
KT-90(Use for 40inch.)
KT-100(Use for 46inch.)
This product is designed and manufactured with high quality
materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at
their end-of-life, should be disposed of separately from your
household waste.
Please, dispose of this equipment at your local community waste
collection/recycling centre.
In the European Union there are separate collection systems for
used electrical and electronic product.
Please, help us to conserve the environment we live in!
Note
✽The illustrations used in this manual are of the LT-40T6MVH unless otherwise state.

IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
6
Important safeguards for you and your new product
Your product has been manufactured and tested with your safety in mind. However, improper use
can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have
been built into your new product, please read and observe the following safety points when
installing and using your new product, and save them for future reference.
Observing the simple precautions discussed in this operating guide can help you get many years
of enjoyment and safe operation that are built into your new product.
This product complies with all applicable U.S. Federal regulations and voluntary safety standards.
1. Read Instructions
All the safety and operating instructions should be read
before the product is operated.
2. Follow Instructions
All operating and use instructions should e followed.
3. Retain Instructions
The safety and operating instructions should be
retained for future reference.
4. Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.
5. Cleaning
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6. Water and Moisture
Do not use this product near water for example, near a
bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool.
7. Accessories, Carts, and Stands
Do not place this product on a slippery or tilted surface,
or on an unstable cart, stand, tripod, bracket, or table.
The product may slide or fall, causing serious injury to
a child or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
product. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
8. Transporting Product
A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination
to overturn.
9. Attachments
Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
10. Ventilation
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product
and to protect it from overheating, and these openings
must not be locked or covered. The openings should never
be blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer ’s
instructions have been adhered to.
11. Power Sources
This product should be operated only from the type of
power source indicated on the marking label. If you are not
sure of the type of power supply to your home, consult your
product dealer or local power company. For products
intended to operate from battery power, or other sources,
refer to the operating instructions.
12. Power Cord Polarization
This product is equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin This plug will only
fit into a grounding-type power outlet. . This is a safety
feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the grounding-type plug.
13. Power Cord Protection
Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit
from the product.
PORTABLE CART WARNING

IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
7
14. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the
product, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810 of
the National Electrical Code (U.S.A.), ANSI/NFPA 70
provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode.
Example of Grounding According to National
Electrical Code Instructions
15. Lightning
For added protection for this product (receiver) during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system.
This will prevent damage to the product due to
lightning and power-line surges.
16. Power Lines
An outside antenna system should not e located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching
such power lines or circuits, as contact with them might
be fatal.
17. Overloading
Do not overload wall outlets and extension cords as
this can result in a risk of fire or electric shock.
18. Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on
the product.
19. Servicing
Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.
20. Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. If the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen
into the product.
c.
If the product has been exposed to rain or water.
d. If the product does not operate normally by f
ollowing the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
e. If the product has been dropped or the cabinet
has been damaged.
f. If the product exhibits a distinct change in
performance.
21. Replacement Parts
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
22. Safety Check
Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
23. Wall Mounting
The product should be mounted to a wall only as
recommended by the manufacturer. The product may slide
or fall, causing serious injury to a child or adult, and serious
damage to the product.
24. Heat
The product should be situated away from heat sources
such as radiators, heat registers, stoves, or
other products
(including amplifiers) that produce heat.

8
Contents
Contents
uWarnings ······················································································································································ 3~5
uIMPORTANT SAFETY INSTRUCTIONS ·····························································································
6~7
uContents ····················································································································································
8~9
uSupplied Accessories ·····························································································································
10
uInstallation ···················································································································································
11
uConnecting Speaker···································································································································
12
uControls ···················································································································································
13~16
Front Panel ·················································································································································
13
Rear Panel ··················································································································································
14
Remote controller······························································································································15~16
uBasic Operation ···································································································································
17~18
Turning the TV On and Off ·····················································································································
17
Program selection ····································································································································
17
Volume adjustment ··································································································································
17
PÏP ·····························································································································································
17
Sound mute function ·······························································································································
17
On screen menu language selection ····································································································
18
Changing the Input mode ·······················································································································
18
Displaying Information ·····························································································································
18
uOn Screen Menus and Display ···············································································································
19
uSetting up TV Program ······················································································································
20~22
Auto Program ············································································································································
20
Manual Program ·······································································································································
21
Manual Picture Control ···························································································································
22
uPicture Control ············································································································································
23
PICTURE Effect ·········································································································································
23
Auto Picture Control ································································································································
23
uSound Control ·······································································································································
24~25
Manual Sound Control ····························································································································
24
SOUND Effect ···········································································································································
25
Auto Sound Control ·································································································································
25
uParental Control ···································································································································
26~27
uINFORMATION ·····································································································································
28~29
uCaptions ·························································································································································
30
uOther functions ····································································································································
31~35
Clock ···························································································································································
31
N.R.(Noise Reduction) ·····························································································································
31
Blue Back ···················································································································································
31
Auto Sleep ··················································································································································
32
Childlock ·····················································································································································
33
ARC(Aspect Ratio Control) ·····················································································································
33
Sleep timer ·················································································································································
34
PIP function ···············································································································································
34
Calling the program list ···························································································································
35
uBefore operating the set, please read this manual carefully.

9
Contents
Contents
uBefore operating the set, please read this manual carefully.
uExternal Equipment Connection ····································································································
36~38
Antenna connection ·································································································································
36
A/V IN ··························································································································································
36
A/V OUT ······················································································································································
37
COMPONENT 1 IN / COMPONENT 2 IN ····························································································
37
Connecting to HDMI (High Definition Multimedia Interface) ···························································
38
S-VIDEO IN ················································································································································
38
Headphone jack ········································································································································
38
Coaxial OUT ···············································································································································
38
uConnecting the PC as a monitor ····································································································
39~42
Picture adjustment ···································································································································
39
Sound adjustment ····································································································································
40
Setup ···························································································································································
41
Auto ·····························································································································································
41
PC INPUT ··················································································································································
42
uProduct Specifications ·····························································································································
43
uTroubleshooting ··········································································································································
44

10
Supplied Accessories
Supplied Accessories
uMake sure the following accessories are provided with Product.
Battery installation
Wide LCD-TV
Instruction Manual
Please read this manual carefully before operating your set.
●LT-40H6MVH
●
LT-40T6MVH
●
LT-46T6MVH
AC cord Batteries (2EA) Remote controller
VGA cable Instruction manual PC AUDIO IN cable

uInserting batteries
1 Remove the battery cover by pulling it
upward in the direction shown by the arrow.
2 Insert the batteries with correct polarity.
3 Replace the battery compartment cover.
-Install two high-quality 1.5V "AAA" alkaline batteries. Don't mix old batteries with new batteries.
-Remove batteries when you won't use the remote controller for long time. Liquid
leakage from old batteries may cause operation failure.
uNotes for using remote controller
• Make sure there are no objects between the remote controller and its sensor.
• Don't place the remote control near a heater or in damp place. Strong impact to the remote
control may cause operation failure.
• Signal from the remote control may be disturbed by sun light or other bright light. In this case,
darken the room or move the TV.

11
Installation
Installation
uYou can install the TV on a wall or place it on a table-like surface.
uTo eliminate any risk of injury from the TV falling, it should be mounted securely.
Installation Options
When the TV is placed into a cupboard,
the distance between the TV and the wall
have to leave minimum 60mm square
as below.
When the TV is mounted on the wall,
the distance between the TV and the
wall have to leave minimum 30mm
square as below.
Wall Installation
Caution
Do not install the TV on a weak wall surface, like plaster etc.
For detailed information, refer to the wall mount bracket instruction
(not included in delivery) supplied with wall mount bracket.
Note
Desktop Installation
3 The TV and stand may now be placed upright, ready for
viewing.
2 Locate the stand on its mounting position and use
the supplied screws to attach the stand to the TV.
Ensure that all of them are securely tightened.
1 Lay down the TV as pictured right. Please ensure that the table/box has a
protection sheet to avoid any scratch or damage to the TV screen.
Please ensure that there is no pressure directly applied to the front surface of
the TV screen when laying the product down on its face.

12
Connecting Speaker
Connecting Speaker
LConnecting TV and Speaker(LT-40T6MVH/LT-46T6MVH)
1Fix the bracket onto the guide pole located on the rear of TV and Speaker.
2Clamp the speaker and the TV together fasten the screws.
3Connecting the speaker audio cable to the external speaker output jack on the TV.
4Fix the speaker audio cable on the quick clamp✽located on the rear of TV.
✽Quick clamp✽: Attach the offered quick clamp on each position
speaker joint bracket
External speaker
output jack
External speaker
input jack
✽Quick clamp

13
Controls
Controls
1. ON/OFF
Switches TV set on or off.
2. MENU
Displays a menu.
3. ▼CH▲(Channel Up/Down)
Selects a channel or a menu item.
4. ◀VOL▶(Volume Up/Down)
Adjusts the volume./ Adjusts menu settings.
5. TV/AV
Selects TV, VIDEO, S-VIDEO, COMPONENT1, COMPONENT2, PC ANALOG, HDMI./ Clears the
menu from the screen.
6. Power Indicator
Illuminates in red when the TV is in standby mode./ Illuminates in green when the
TV is switched on.
7. Remote control sensor
Accepts the IR signal of remote controller.
CH
Front Panel
[LT-40T6MVH, LT-46T6MVH][LT-40H6MVH]

14
Controls
Controls
1. PC ANALOG IN (D-SUB)
2. HDMI (High Definition Multimedia Interface) IN
Connect to the HDMI jack for device with HDMI output.
3. PC AUDIO IN
Connect the audio cable from the PC to the PC AUDIO IN of the set.
4. H/P (Headphone out)
Connect a headphone to this socket.
5. Coaxial OUT
Connect the coaxial audio cable from the digital audio device to the Coaxial OUT of the set.
6. COMPONENT1 IN
Connect the COMPONENT1 audio/video output sockets of the DTV set top box to the
COMPONENT audio/video Input sockets of the set.
7. S-VIDEO IN
Connect the output of an S -VIDEO VCR to the S-VIDEO input.
Connect the S -VIDEO Audio cable for sound.
8. COMPONENT2 IN
Connect the COMPONENT2 audio/video output sockets of the DTV set top box to the
COMPONENT audio/video Input sockets of the set.
9. A/V-IN
Connect the Audio/Video outputs of external equipment to these inputs.
10. A/V-OUT
Connect the Audio/Video inputs of external equipment to these outputs.
11. COMM.
Communicaton port.
12. ANT.
Rear Panel

15
Controls
Controls
All the functions can be controlled with the remote controller. Some functions can also be
adjusted with the buttons on the side panel of the set.
Remote controller
Before you use the remote controller, please install the
batteries.
1. POWER
Turns the TV on from standby or off to standby mode.
2. MUTE
Turns the sound on and off.
3. NUMBER buttons
Selects Channel numbers.
4. Hyphen (*only DTV mode)
Press to select DTV channels. For example, to select
channel '54-3', press '54', then press '-' and '3'.
5. Lock ( ) button
When the parental control function is locked, press the
lock button, then parental control function is unlocked.
6. DTV (*Only DTV mode)
This button is direct access to the DTV input.
7. EPG (*only DTV mode)
Displays a receiving broadcast information.
8. INFO (*only DTV mode)
Use to see information on the current broadcast.
9. MENU
Displays a main menu.
10. TV/AV
Selects TV, VIDEO, S-VIDEO, COMPONENT1,
COMPONENT2, PC ANALOG or HDMI mode.
Clears the menu from the screen.
11. CHx/CHy(Channel Up/Down)
Selects next Channel or a menu item.
12. ÏVOLq(Volume Up/Down)
Adjusts the sound level.
Adjusts menu settings.
13. Ïq
Adjusts the sound level.
Adjusts menu settings.
14. OK
Press OK button to activate a particular item.

16
Controls
Controls
15. SLEEP
Sets the sleep timer.
16. Q.VIEW
Returns to the previously viewed Channel.
17. PICTURE( )
Recalls your preferred picture setting.
18. SOUND( )
Recalls your preferred sound setting.
19. SAP
Adjusts the MTS-stereo, Mono, SAP
20. CC
Set the caption function.
21. LIST
Displays the program list menu.
22. FAV+/-
Press to switch to your favorite channels.
23. PIP( )
Displays a PIP(Picture In Picture) screen.
24. INPUT( )
Selects the AV source of sub picture in PIP mode.
25. SWAP( )
Switches a main picture for sub picture in PIP mode.
26. POSITION( )
Selects a position of PIP screen.
27.MODE( )
Selects a PIP screen mode. – 16:1, 9:1, Double Window
mode.
28. ARC( )
You can watch TV in various picture formats; 16:9, 14:9,
4:3, 16:9 Zoom, 14:9 Zoom, 4:3 Zoom and Auto.
Repeatedly press the ARC button to select your desired
picture format.
29. xCHy
Selects a channel when RF signal is displayed in PIP
mode.
30. FAV
Stores or deletes the favorite channel.
31. MEMORY
Stores or deletes the current channel.

17
Basic Operation
Basic Operation
Program selection
You can select a Program number with the CHxx/CHyybutton or
NUMBER buttons.
Volume adjustment
Press the VOLÏÏ/VOLqqbutton to adjust the sound level.
Q.VIEW
Press the Q.VIEW button to view the last program you were
watching.
Sound mute function
Press the MUTE button. The sound is switched off and the mute
display appears.
To cancel mute mode, press the MUTE button again, VOLÏÏ/VOLqq,
SAP or SOUND( ) button.
Standby Setup: The AC power cord must be set up and connected
to have the TV in standby mode ready to be turned on. Press the
ON/OFF button on the front panel of the TV to go into standby
mode.
1 If the TV is in standby mode, press the POWER button
on the
remote controller or the TV itself to turn the TV on.
2 Press the POWER button again on the remote controller or
the TV itself to turn the TV off.
Turning the TV On and Off
If the TV is on and the POWER button is pressed
to turn the TV off, the TV goes into standby mode.
Note

18
Basic Operation
Basic Operation
On screen menu language selection
The menu can be displayed on the screen in desired language.
First select your language.
1 Press the MENU button.
2 Select the Setup menu with CHxx/CHyybutton.
3 Press the ÏÏqqbutton to select the Setup menu.
4 Select the Language with CHxx/CHyybutton.
5 Press the ÏÏqqbutton to select the Language.
6 Press the CHxx/CHyybutton to select your desired language.
7 Press the TV/AV button.
All the on screen menu will appear in the selected language.
1 Press the TV/AV or CHxx/CHyybuttons to change the input
mode.
2 Press the OK button to select your desired mode.
You can display the Channel information and setting status you
selected.
Press the OK button
Changing the Input mode
Displaying Information
Setup
Language

19
On Screen
Menus and Display
On Screen
Menus and Display
1 Press the MENU button to display main menu.
2 Press the CHxx/CHyybutton to select menus-Picture,
Sound, Special, Setup.
3 Adjust each menu with the ÏÏqqbutton.
4 Press the MENU button to return to preceding menu.
5 Press the TV/AV button to finish adjusting menu.
Color Temperature
Contrast
Brigheness
Color
Sharpness
Picture
Parental Control
Caption Off
Picture
Color Temperature
Setup
Clock
START
Table V/UHF
Setup
Language
Setup
Parental Control
TV Rating
MPAA Rating
Change Password
Aux. Block Sources Unblocked
Always
Off
Block Hour
Parental Lock
Channel
Table V/UHF
0
On
Name
Finetune
Skip
Memorize