Digix TAB-840 User manual

TAB-840

IC WARNING
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada.
To reduce potential radio interference to other users, the antenna type andits
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is
not more than that necessary for successful communication.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment .End users must follow the specific operating instructions for satisfying RF
exposure compliance.This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.This equipment has been SAR-evaluated for use
in hand.SAR measurement are based on a 0cm spacing from the body and that compliance
is achieved at that distance.

Select "WI-FI " and glide the "OFF" bar to the right to turn on
the"WI-FI"
1. Click and select "Bluetooth" in the settings menu.
2. Glide the "OFF" bar to the right to turn on the "Bluetooth" " "
" "
3. All nearby Bluetooth devices found by the tablet will be listed.
You can click the device name to be paired.
4. If the pairing is successful, the informatin of the paired device will
be saved. You can play games against the paired device and
transfer files with each other.

To enter the interface of application icons, click the button at the
top-right corner of the screen, as shown below:
icons will appeared, which are Wallpaper, Manage apps, System settings
as shown below:

4. Click to show the lyrics.

3. In terms of WIFI use, please set the WIFI switch on home screen to
OFF state by pressing the icon once.
To make sound when screen get locked , you can select Screen
Lock sound.

1. Screen Security.
To set screen lock, press Screen lock →choose from None, Slide, Pattern,
PIN and Password.
2. Passwords.
To show password as you type, press Make passwords visible.
If the password is forgotten or lost, it is retrievable through the Google
Account synced to the tablet.
Note: Irretrievable passwords are not covered under the warranty.
3. Device administration.
To view or deactivate device administrators, press Device administrators.
4. Credential Storage.
5. Unknown sources.
To allow installation of application provided by the unauthorized electronic
market, press Unknown sources.
6. Trusted credentials.
To view trusted CA certificates, press Trusted credentials.
7.Install from SD card.
To install certificates from SD card, press Install from SD card.
In this item, you can set the language, Spell checker, Personal
dictionary, Default, Android keyboard, Google voice typing, Voice
search, Text-to-speech output and Pointer speed.

1. Select Language.
To select the Language, press Settings →Language & input→
Select Language.
2. Spell checker.
To set automatic correction, press Settings →Language & input
→Spell checker.
3. Personal dictionary.
To add words into or delete words from the user-defined dictionary.
4. Default.
To configure input methods, press Settings →Language & input →Default.
5. Android keyboard.
To set Android keyboard, press Settings → Language & input →
Android keyboard.
6. Google voice typing.
To choose Google voice typing, press Settings Language & input
→Google voice typing.
7. Voice Search.
To set Voice Search, press Settings → Language & input → Voice Search.
8. Text-to-speech output.
To set the Speech rate and play demonstration of speech synthesis,
press Settings →Language & input →Text-to-speech output.
9. Pointer speed.
To set your Pointer speed, press Settings → Language & input →
Pointer speed.
→
8.12 Backup & reset
To back up your data, reset your Digix Tablet or reboot into the system
in the Recovery Mode, press Settings →Backup& reset.