Visual Land PREMIER Manual

PREMIER Windows 10 Tablet Guide Book
Copyright © 2015 Visual Land Inc. All rights reserved.
Windows® and the Windows logo are trademarks of the
Microsoft group of companies. Intel Inside is a trademark of Intel
Corporation in the U.S. and/or other countries. Visual Land and
the Visual Land logo are trademarks of Visual Land Inc. All other
marks and trademarks are properties of their respective owners.
The content of this guide including images/illustrations may differ
in some details from the product or its software. All information
in this document is subject to change without notice.
For online Help and Support, visit www.visual-land.com/support.
©2015 Visual Land Inc. Page | 1

PREMIER Windows 10 Tablet Guide Book
Table of Contents
1. Getting Started....................................................................................Page 3
2. Tablet Interfaces.................................................................................Page 8
3. Basic Operation..................................................................................Page 12
4.Synchronizing Your Tablet..................................................................Page 18
5.Recovery……………….............................................................................Page 19
Safety Information………………................................................................Page 21
Limited Warranty………………..................................................................Page 22
©2015 Visual Land Inc. Page | 2

PREMIER Windows 10 Tablet Guide Book
1. Getting Started
Charge the battery
The tablet's battery may not be fully charged out of the box. It’s
recommended that you fully charge it before attempting to set up
the tablet.
A fully discharged battery can take about 4 hours to fully charge.
When the battery is being charged, the LED indicator light will
show next to the camera on the front of the tablet. Use only the
supplied power adapter to charge your tablet. Using
unauthorized power adapters may severely damage your tablet.
Note: If the LED indicator light does not light during charging, try
another outlet in your home, also try charging with a computer.
Lastly, try charging with another power cable, either a USB or
power adapter if you have more than one.
If the tablet is having persistent charging issues, please call Visual
Land Customer support at 1-562-860-2669, or visit our website at
visual-land.com/support. Make a note of the tablet's issue as
well as the methods you used to charge the tablet.
©2015 Visual Land Inc. Page | 3

PREMIER Windows 10 Tablet Guide Book
Power On & Sign In
To turn on your tablet, press and hold the Power Button for 2-3
seconds. You can find the Power Button on the side of your
tablet. After holding down the Power Button, you should see the
Visual Land logo appear on your screen. Once the screen has
powered on, release the button.
Set up your tablet
The initial boot up will walk you through setting up your tablet for
use.
Language: Specify what language you would like the tablet to
use. Devices sold in the United States typically use English as the
default.
Personalize: You will then be asked to choose a name and color
for your tablet. This can be any combination of letters and
numbers containing no spaces. This name is used when other
devices encounter your tablet on your home network, or when
you’re configuring settings for OneDrive syncing. Press the "Next"
Button to continue.
Get online: You will then see a screen showing available Wi-Fi
Networks. If your network has a password set up, you will need it
in order to connect to the Internet. Look through the list of
©2015 Visual Land Inc. Page | 4

PREMIER Windows 10 Tablet Guide Book
available networks and tap on the name of your Wi-Fi network. If
your network is password enabled, you will be asked to enter the
"network security key".
Note: If you have any questions about your Wi-Fi Network or how
to obtain Wi-Fi, please contact your Internet Service Provider.
Settings: This step will configure your Window's preferences. For
most users, the Express Settings is recommended and will
automatically set your preferences. You are also given the option
to Customize these settings if you would like to change some
default preferences. Either option will allow you to change your
Window's settings at a later time.
Sign in to your Microsoft account: Add your Microsoft Account to
your device or create a new one. This ensures you’ll get the latest
updates automatically, provide OneDrive syncing capabilities, and
will give you access to the Windows Store to download apps.
©2015 Visual Land Inc. Page | 5

PREMIER Windows 10 Tablet Guide Book
Once you finished the initial setup, your tablet will restart
automatically and begin installing Windows Apps.
After this set-up process, you will see your Start page.
©2015 Visual Land Inc. Page | 6

PREMIER Windows 10 Tablet Guide Book
Subsequent boot ups will go straight to the Windows 10 lock
screen.
Note: If the login screen is not enabled, you will be taken directly
from the lock screen to the start screen.
©2015 Visual Land Inc. Page | 7

PREMIER Windows 10 Tablet Guide Book
2. Tablet Interfaces
Your Premier tablet has several interfaces which are conveniently
labeled on the back of the tablet.
Power Off the Tablet
The Power Button is labeled by the power icon (the leftmost icon
in the above image).
To Power Off your tablet, press and hold the power button for at
least 4 seconds. A shut down confirmation screen will appear on
the screen. Swipe it down to the bottom edge of the display to
turn off the tablet.
Turning On/Off the Screen
You can turn on and off the screen display by pressing the power
button once. Alternately you can use the Notifications by swiping
in from the right edge of the display. Touch All Settings -> Power
-> Sleep to turn off the screen.
©2015 Visual Land Inc. Page | 8

PREMIER Windows 10 Tablet Guide Book
Audio output
You can plug in your headphones using the 3.5mm auxiliary cable
output. This output is labeled by the headphones icon on the
back of your tablet.
Inserting/Removing a Micro-SD Card
You can transfer and backup data using a Micro-SD card. This is
labeled on the back of your tablet as "Micro-SD". Align the
Micro-SD Card so that the pins are pointed toward the card slot.
Push the Micro-SD Card into the card slot until you here a click
sound.
Caution: Removing the Micro-SD Card while it is in use may cause
data loss or result in application errors. Touch the Desktop tile to
enter Desktop mode. Touch Safely Remove Hardware in the
notification area at the bottom right corner of the screen. Note: If
you do not see Safely Remove Hardware, touch Show Hidden
Icons to display all icons in the notification area. Touch Eject SD
Memory Card. A message appears confirming that the Micro-SD
Card can be safely removed.
©2015 Visual Land Inc. Page | 9

PREMIER Windows 10 Tablet Guide Book
Micro-USB
You can also use a Micro-USB cord to transfer and backup data to
another computer. Simply plug the Micro-USB end of you cable
into the tablet. Then plug the larger USB end into your computer.
Microphone
Your tablet also has a microphone which can take audio input.
You can use this for voice communication or video recording with
audio. The microphone is labeled on the back of the tablet as
"MIC".
DC Charging Input
To charge your tablet, you will need to input your AC charger in
the DC charging port. The DC charging input is labeled as "DC" on
the back of your tablet.
Volume
You can adjust the volume of your tablet by using the buttons on
the side of your tablet labeled as "+" and "-". Press the "+" button
to increase your volume and the "-" button to decrease volume.
©2015 Visual Land Inc. Page | 10

PREMIER Windows 10 Tablet Guide Book
Connecting the Keyboard
This device is designed to be equipped with a dedicated
keyboard. Follow these steps to connect the keyboard to your
tablet:
1. Place the dedicated keyboard on an even and
stable plane (i.e. desk).
2. Hold your tablet with two hands, align the
connector on the keyboard to the jack and
positioning slots at the bottom of the tablet.
3. As soon as the keyboard is connected to the tablet,
it is ready to use.
Note:
•This keyboard is a plug-and-play device, you can
plug/unplug it into the keyboard jack at any time.
•There is no notification for the keyboard connection,
except for the appearance of the mouse icon (arrow) as
you put your hand onto the touch area.
©2015 Visual Land Inc. Page | 11

PREMIER Windows 10 Tablet Guide Book
3. Basic Operation
Touch Commands
There are various methods of touch in which to control your
device.
Additionally you can use two fingers and swipe left/right or up
down to scroll (a la mouse wheel). Press and hold also works
similar to a right mouse click. And double tapping works like
double click the left mouse button.
©2015 Visual Land Inc. Page | 12

PREMIER Windows 10 Tablet Guide Book
Start
Press the Windows Key at any time (on your tablet or
keyboard) to bring up the Start Screen. From the Start Screen,
you are able to search for any app or setting that you might need.
You can also Power Off your tablet by using the power button in
the top right corner.
©2015 Visual Land Inc. Page | 13

PREMIER Windows 10 Tablet Guide Book
Notifications
When you are on the desktop, swiping in from the right edge of
the display will bring up your Notifications. This allows you to
view important notifications and various settings on your device.
Switch Apps
You can easily switch between running apps by swiping in from
the left edge of the screen.
©2015 Visual Land Inc. Page | 14

PREMIER Windows 10 Tablet Guide Book
Connecting to the wireless Internet:
To connect to a wireless network in your own home or in a
public place, follow these steps:
•Slide your finger inward from the screen’s right
edge; when the Notifications bar appears, tap the
All Settings icon
•Tap the wireless network icon. When the icon says
Available, you’re within range of a wireless
network; Therefore you are able to connect.
•When you find the desired network you would like
to connect too, Click its name then click the
connect button.
•Some network are secured, which means they
require a password to facilitate the connection
between your tablet, and the network.
•After connection to the internet, you will have
the option of Sharing your files with other
individuals using the same network as you. Please
make sure you are very sure before sharing your
files, because all of your information will be made
public on the network.
©2015 Visual Land Inc. Page | 15

PREMIER Windows 10 Tablet Guide Book
Keeping your Account secure With A Password:
To set up or change your password, Please follow these
simple steps:
1. Swipe in from the right edge of the screen,
tap Settings, and then tap Change PC settings.
2. Next, Tap Accounts, and then tap Sign-in options.
3. Click Change your password and follow the
instructions.
There are 3 types of passwords:
•Regular Password: This password should be a
strong password to help keep your account safe,
and secure.
•Picture password: Allows you to sign in by using
your preferred photo. Very Unique and secure.
•PIN: Ability to sign in quickly with a basic four digit
number.
©2015 Visual Land Inc. Page | 16

PREMIER Windows 10 Tablet Guide Book
Window's Apps
Windows apps provide many types of entertainment and ways to
accomplish tasks more efficiently. Whether you are organizing a
family album or playing a game on the ride to school, the
Window's Store has the perfect app for any situation.
Installing Apps From the Windows Store
You can install thousands of apps which are all available from the
Windows Store. To access the Store, navigate to the Start Screen
by pressing the Windows Key on your tablet or keyboard.
The Start Screen will show some of the apps
already installed. Select the Store app to
install more.
Using the navigation bar at the top of the
Store, you can browse popular apps or
search for any app you have in mind.
©2015 Visual Land Inc. Page | 17

PREMIER Windows 10 Tablet Guide Book
4. Synchronizing Your Tablet
Using a Microsoft Account
If your computer has Microsoft Windows 10 installed, you can
synchronize user settings of your tablet with your computer using
a Microsoft account. When you sign in with your Microsoft
account on your tablet, your settings, including internet browser
history, app settings, and personal files etc., are synchronized
with other Windows 10 PCs and tablet computers.
On the tablet, access Notifications and tap Settings -> Change
PC Settings -> Accounts -> Your account -> Connect to a
Microsoft Account.
Tap Settings -> Change PC Settings -> OneDrive -> Sync settings
to see the options for synchronizing your data and settings.
Copy music, photos and videos
Connect your tablet to a USB storage device with a MicroUSB to
standard USB conversion cable (included), then transfer files to or
from the USB storage device. After transferring files, use the
Safely Remove Hardware wizard to remove the USB storage
device.
©2015 Visual Land Inc. Page | 18

PREMIER Windows 10 Tablet Guide Book
5. Recovery
Refreshing Your Tablet
Refreshing your tablet will restore Windows to original factory
settings without deleting any of your personal files, installed apps
from the Windows Store, or personalization settings.
To restore your tablet swipe in from the right edge of the display
to access Notifications. Touch All Settings -> Change PC Settings
-> Update and Recovery -> Recovery. Touch Get started under
Refresh your PC without affecting your files. Read the warning
and touch Next after you read the warning.
Note: Apps installed from the Windows Store are automatically
reinstalled after the refresh is complete. Apps installed from
sources other than the Windows Store are removed and have to
be manually installed. A list of apps removed during this process is
created on the desktop after the process is complete.
©2015 Visual Land Inc. Page | 19