Displaysense Lectern LT950 User manual

General Instruction Sheet
Lectern L T950
Parts List
21 
1 

1 (D)
1 (C)
1 (E base)
1 (E Top)
E Top
E Top
E Base
C
C
Page 1 of 2
B
D
R 


 7  6 


. I

B

General Instruction Sheet
Lectern LT950
Page 2 of 2
Step 1 – Get one angled side (B) – with handle cut out,
and the long bac piece (D).
Tip - En uring the e are the correct way up, u e 4 ocket crew and
a ociated fixing point to join the e together. We recommend you
turn each crew 4 or 5 turn before tightening fully - thi will help to
align the panel .
Step 2 – Once completed, ta e the 2ND angled side (B)
and attach to the bac piece in the same manner as
above.
Step 3 – Ta e the shelf panel (C), fix this to the central
fixing points in the side and bac pieces previously
assembled.
Tip - Attach the front trip before attaching the helf.
Step 4 – Balance the unit carefully with the angled end
resting on a soft surface, align the base (E Base) to the
bottom of the central column and fix using soc et
screws and fixings points as before.
Now carefully turn the unit the correct way up.
Step 5 – Ta e the top shelf (E Top) and align this with the
fixing points on the top of the sides and bac assembly.
Tip -Fix one point fir t, turn four or five time before moving on to
the next. Complete and tighten each one to complete the
a embly of your lectern di play.
Tip2 - Attach the front trip before attaching the top to the unit.
Notes
Do not over tighten screws.
We recommend that when movement or turning of the unit is
required, 2 persons be used to avoid damage to unit.
When cleaning the unit we recommend that you use our
Acrylic/Perspex cleaner together with our Perfect polishing cloth.