Dorel Asia WM1646 Series User manual

MODEL NO:
WALNUT
CHERRY
NATURAL
WHITE
ESPRESSO
WALNUT
CHERRY
NATURAL
WHITE
ESPRESSO
FUTURE REFERENCE.
LOT NUMBER:
(TAKEN FROM CARTON)
NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, Contact our
customer service department. We will
replace the part FREE of charge.
Tel # : [phone]
E-Mail: [email protected]
Fax #: [phone]
TODDLER BED
______ / ______ / ______
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
READ AND KEEP FOR
DATE OF PURCHASE:
INFORMATION. PLEASE
NOTE:
UPC CODE:
0-65857-14156-6
0-65857-14155-9
0-65857-14160-3
0-65857-14157-3
0-65857-16242-4
DOREL ASIA
WM1646RWN
WM1646RN
WM1646RC
WM1646RW
WM1646E

* Infants have died in toddler beds from entrapment and strangulation
*
*NEVER use bed with children under 15 months.
*NEVER place bed near windows where cords from blinds or drapes may strangle a child.
*
*
*
*
*
*
*
*
*
*Phillips head screwdriver is not included.
*Assembly will require 2 people.
*Estimated assembly time: 25 minutes.
*
Caution: Adult assembly required.
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
DO NOT use a water mattress with this toddler bed.
NOTE
CUSTOMER SERVICE
Before each usage or assembly, inspect toddler bed for damaged hardware, loose joints, missing parts or
sharp edges, DO NOT use toddler bed if any parts are missing or broken. Ask your dealer or write to
our customer service representative (address & phone number shown above ) for replacement parts and
instructional literature if needed. DO NOT substitute parts.
Any mattress used in this product must be at least 27-1/4 inches by 51-5/8 inches (69cm by 131cm) with
a minimum thickness of 4 inches (10cm) and not exceeding 6 inches (15cm).
WARNING ENTRAPMENT/STRANGULATION HAZARD:
If you are missing parts or have any questions about this product, contact our customer service
representative first!
12345 Albert-Hudon Boulevard, Suite 100
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number,
color and a detailed description of the part.
DO NOT suspend strings over a TODDLER BED for any reason.
Customer Service Department No. 413
DO NOT place TODDLER BED near windows where cords from blinds or drapes may strangle a
child.
DO NOT place items with a string, cord, or ribbon around a child's neck, such as hood strings or
pacifier cords.
Montreal, Quebec
Canada, H1G 3L1
E-MAIL: [email protected]
Failure to follow these warnings and assembly instructions could result in serious injury or death from
entrapment or strangulation.
The TODDLER BED is not intended for children under 15 months of age or over 50 pounds (22.7kg).
If guardrails are used as the mattress containment means, guardrail(s) provided must be used to avoid
the formation of a gap between the mattress and the bed that could cause an entrapment.

*
*
WARNING: Should this product become
damaged, and/or components are broken or
missing, DO NOT USE.
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to remedy
any such defect. This warranty covers 1 year from the date of original purchase. This warranty is valid
only upon presentation of proof of purchase. This is solely limited to the repair or replacement of defective
furniture components and no assembly labor is included. This warranty does not apply to any product
which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired
in any way. This warranty gives you specific legal rights and you may also have other rights which vary
from State to State.
LIMITED WARRANTY
CARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish.
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage wood
furniture.
MAINTENANCE
Check bolts periodically and tighten if necessary.

TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
METAL DOWEL
4 PCS
Φ3mm x 32mm
Φ8mm x 30mm
20 PCS
WOOD DOWELWOOD DOWEL
16 PCS
Φ10mm x 40mm
ALLEN KEY
1 PC
4MM
10 PCS
BARREL NUT
Φ1/4" x 1/2"
10 PCS
HEX SOCKET HEAD BOLT
Φ1/4" x 2-1/2"
7
65
43
2
HEX SOCKET HEAD BOLT
18 PCS
Φ1/4" x 1-3/4"
1
HARDWARE LIST
8
16 PCS
STOPPER
1

TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
NARROW SUPPORT SLAT
6 PCS
4 PCS
WIDE SUPPORT SLATCENTER SUPPORT SLAT
1 PC2 PCS
GUARDRAIL
RIGHT SIDE RAIL
1 PC1 PC
LEFT SIDE RAIL
6 PCS
NARROW FOOTBOARD SLAT
WIDE FOOTBOARD SLAT
1 PC
2 PCS
CYLINDER
NARROW HEADBOARD SLAT
6 PCS1 PC
WIDE HEADBOARD SLAT
4 PCS
TOP & BOTTOM CROSS
1 PC
RIGHT FOOTBOARD POST
LEFT FOOTBOARD POST
1 PC1 PC
RIGHT HEADBOARD POST
P
M N O
J LK
GH I
FED
CB
LEFT HEADBOARD POST
1 PC
A
PARTS LIST
2

STEP 1
Insert wood dowels (5) into ends of top & bottom cross (F).
Attach right headboard post (B) to the top cross (F) using hex socket head bolt (1) as shown.
Use Allen Key (4) to tighten the bolt.
NOTE: Do not fully tighten bolts. This will facilitate assembly in the following steps.
One of the top & bottom cross (F) has a warning label on it, Do not use it in this step.
TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
5
5
5
F
B
1
4
5
1
3

TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
Insert wide headboard slat (G) and narrow headboard slats (H) into the holes of the top cross (F).
Push the headboard slats to secure them in place.
STEP 2
GH
4

NOTE: Do not fully tighten bolts. This will facilitate assembly in the following steps.
STEP 3
Insert wood dowels (5) into ends of the bottom cross (F).
Insert stoppers (8) into the holes of the bottom cross (F).
Insert bottom cross (F) to the right headboard post (B).
Insert the wide headboard slat (G) and narrow headboard slats (H) into the holes of the bottom cross
(F).
Secure bottom cross (F) to the right headboard post (B) using hex socket head bolt (1) as shown. Use
Allen Key (4) to tighten the bolt.
Use the top & bottom cross (F) with a warning label in this step.
TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
H
8
15
5

TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
Insert metal dowels (7) into ends of cylinder (E).
Attach cylinder (E) to the right headboard post (B) using hex socket head bolt (1) as shown. Use
Allen Key (4) to tighten the bolt.
NOTE: Do not fully tighten bolt. This will facilitate assembly in the following steps.
STEP 4
7
7
1
6

STEP 5
Attach the left headboard post (A) to the top & bottom cross (F) and cylinder (E) using hex socket
head bolt (1) as shown. Use Allen Key (4) to tighten the bolts.
You have finished assembling the headboard of the toddler bed.
NOTE: Do not fully tighten bolts. This will facilitate assembly in the following steps.
TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
14
1
7

TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
Insert wood dowels (5) into ends of top cross (F).
Attach the left footboard post (C) to the top cross (F) using hex socket head bolt (1) as shown. Use
Allen Key (4) to tighten the bolt.
NOTE: Do not fully tighten bolt. This will facilitate assembly in the following steps.
STEP 6
5
1
41
F
5
5
5
8

STEP 7
Insert wide footboard slat (I) and narrow footboard slats (J) into the holes of the top cross (F).
Push the footboard slats up and to secure them in place.
TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
I
9

NOTE: Do not fully tighten bolt. This will facilitate assembly in the following steps.
TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
Insert wood
Insert wood dowels (5) into ends of the bottom cross (F).
Insert stoppers (8) into the holes of the bottom cross (F).
Insert the bottom cross (F) to the left footboard post (C).
Insert the wide footboard slat (I) and narrow footboard slats (J) into the holes of the bottom cross (F).
Secure the bottom cross (F) to the left footboard post (C) using hex socket head bolt (1). Use Allen
Key (4) to tighten the bolt.
8
15
J
10

STEP 9
Insert metal dowels (7) into ends of cylinder (E).
Attach cylinder (E) to the left footboard post (C) using hex socket head bolt (1) as shown.
Use Allen Key (4) to tighten the bolt.
NOTE: Do not fully tighten bolt. This will facilitate assembly in the following steps.
TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
7
1
11

TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
STEP 10
Attach the right footboard post (D) to the top & bottom cross (F) and cylinder (E) using hex socket
head bolt (1) as shown. Use Allen Key (4) to tighten the bolts.
You have finished assembling the footboard of the toddler bed.
NOTE: Do not fully tighten bolts. This will facilitate assembly in the following steps.
1
D
12

STEP 11
Insert the wide support slats (O) and narrow support slats (P) into the grooves of the right side rail
(L). Ensure the dowels in the slats go into the holes on the side rail.
Insert wood dowels (6) into ends of the wide support slats (O) and narrow support slats (P) as shown.
Insert barrel nut (3) into the hole on the wide surface of center support slat (N). Ensure the barrel nut
(3) is flush with center support slat (N).
Attach the center support slat (N) to the right side rail (L) by inserting hex socket head bolt (2)
through the right side rail (L) and into the barrel nut (3). Use Allen Key (4) to tighten the bolt.
NOTE: The barrel nut (3) can be rotated using a screwdriver (not included) to properly align with
the bolt coming through the side rail.
TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
3
N
L
24
PRE DRILLED HOLE FACING UP
6
6
2
3
13

TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
NOTE: The barrel nut (3) can be rotated using a screwdriver (not included) to properly align with
the bolt coming through the side rail.
Insert barrel nut (3) into the hole on the wide surface of center support slat (N). Ensure the barrel
nut(3) is flush with center support slat (N).
Attach the left side rail (K) to the wide support slat (O) and narrow support slat (P).
Insert hex socket head bolt (2) through the left side rail (K) into the barrel nut (3) previously
installed in wide support slat (N).
Use Allen Key (4) to fully tighten the bolt.
STEP 12
N
42
3
PRE DRILLED HOLE
FACING UP
3
2
14

STEP 13
Insert barrel nuts (3) into both ends of the left and right side rail (K & L).
Attach the headboard and footboard to the left and right side rail (K & L) by threading hex
socket head bolts (2) through the headboard post (A & B) and footboard post (C & D).
Use Allen key (4) to install bolts.
NOTE: Do not fully tighten bolts. This will facilitate assembly in the following steps.
TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
3
2
3
3
K
L
2
3
F
2
4
F
B
3
4
2
B
A
L
OP
15

STEP 14
That's it ! You've finished assembling your toddler bed.
NOTE: Fully tighten all bolts installed in previous steps.
Attach the guardrails (M) to the headboard post (A & B) with hex socket head bolts (1).
Attach the guardrails (M) to the left and right side rails (K & L) with hex socket head bolts (1) as
shown. Use Allen key (4) to tighten bolts.
TODDLER BED
WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
I
I
J
H1
Headboar
DIAGRAM 2
A
1
B
K
M
1
41
16

MODEL #: WM1646RWN / WM1646RC / WM1646RN / WM1646RW / WM1646E
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service
Customer Service Phone Number 1-800-295-1980
Email: [e-mail]
Customer Service Fax Number 514-353-7819
C
B
E
A
B
B
B