Double-Alpha Academy Shotmaxx 2 User manual

Please review this Quick Start Guide before using
your shot timer for the rst time.
For additional information visit:
www.doublealpha.biz/shotmaxx
Quick Start Guide - V.1

Charging Before First Use and After Update
Before rst using your SHOTMAXX timer and after
any FW update, be sure to plug it into a USB port
or a USB power supply for at least 3 hours, to
ensure the Lithium polymer battery is fully
charged.
Basic Menu Navigation
The SHOTMAXX timer has three modes:
- Watch
- Timer
- Stopwatch/Countdown
Press the MODE button to navigate between the
three modes. Note that each mode illuminates an
icon indicating which mode is active.
Auto-Sleep
SHOTMAXX 2 enters “sleep” mode if not in use for
over 15-20min. The display will turn off to save
battery. To wake the device up, press any button.

Attention!
In Timer mode, with the timer running, the MODE
and SET buttons are deactivated until you press
the REV button. This is to prevent accidently exit-
ing the Timer mode while the timer is recording.
Watch Mode
Press the START button to toggle the display be-
tween the AM/PM or 24 hour mode.
Press the REV button to toggle the display be-
tween seconds and date.
Set Time
In Watch mode, press the SET button once. The
Watch icon ashes.
Press the UP/DOWN button to set the hour.
Pressing the SET button once more toggles to
minutes and then to seconds. Pressing and hold-
ing down either the UP or DOWN button results in
fast forward or backward in setting the time.
Once the time is set, press the MODE button once
to exit the Watch setting mode, then once more to
return to Watch mode.
Set Date
In Watch mode, press the SET button twice to
reach the date settings. Press the UP/DOWN but-
ton to set the month. Use the SET button to
navigate between the Month, Day and Year.
Press the MODE button to exit.

Set Alarm
In Watch mode, press the SET button three times.
Change the ON/OFF value by pressing the UP/
DOWN button.
Press the SET button once more to set the alarm
time. Use the UP/DOWN button to set the hour
and minutes.
Once the alarm is set to ON, an Alarm icon is
displayed on the screen.
Press MODE to exit.
View Battery Level
In Watch mode, press the SET button ve times.
The battery level is displayed. When SHOTMAXX
is charging, the unit shows “Chrge” on display.
Timer Mode
Press the MODE button to advance to the Timer
mode. The Timer icon illuminates.
Active icons in Timer mode:
- Delay icons – I/F/R/C
I=Instant, F=Fixed, R=Random and C=Custom
- Sensor: Mic (Microphone) / Acc (Accelerometer)
- Timer icon
- 1st Shot/Shots

Timer Settings
In Timer mode, press the SET button to enter set-
tings.
Delay
Press the UP/DOWN button to choose between the
Start Delay options.
If Custom “C” is selected, hold down the SET but-
ton to set the desired Delay time. Press MODE to
exit.
Par
Press the UP/DOWN buttons to set the Par time.
Holding down the SET button deletes the Par.
Auto Start (AUtSt)
Press the UP/DOWN button to select ON/OFF. If
Auto Start is OFF and the timer is running, the
REV button will have to be pressed at least once
before starting a new string.
Beep Type
Press the UP/DOWN button to select between
beep type 1, 2 and 3.
Sensitivity
Press the UP/DOWN button to select the desired
sensitivity level Min to Max.
Max – extreme sensitivity for Airsoft use only.
Sensor
Press the UP/DOWN button to select between Mic
(Microphone) or Acc (Accelerometer).
Beep Volume
From OFF to 7 which is the laudest setting.

Spy and Spy Delay
Press the Up/Down buttons to set Spy Mode to
ON/OFF. Once it has been activated, the display
will show SPY only.
Once you make a sharp movement with your
hands (reacting to the RO’s start beep) your SHO-
TMAXX will start running and record all shots be-
ing red.
Spy Delay compensates for your reaction time.
Default is set to 0.15sec.
Timer Operation
START – starts the countdown (I/F/R/C) to the
activation beep.
REV – reviews the recorded shots (stops the timer
from recording, pressing the backlight will stop
the timer from recording as well).
Attention!
The timer will record up to a maximum time of
600 sec (10 min) and/or 100 shots in a string.
Filter
Press the UP/DOWN button to choose between the
lter values (0.02 sec to 0.12 sec). Default is 0.09
Strings
Shotmaxx 2 offers string memory to up to 9
strings. In Review Mode, press the light button to
navigate between the strings. Press Rev to browse
through each shot recorded in the string selected.

Stopwatch
Press the START button to start the stopwatch.
Pressing START again while the stopwatch is run-
ning pauses or resumes the count.
Pressing the DOWN button while the stopwatch is
running records the “split/lap” time.
When the stopwatch is paused, you can review
these split times by scrolling using the REV but-
ton.
Hold the SET button to reset.
Countdown (3 or 5 minutes)
Press the START button to start countdown. Press-
ing the START button again while the countdown
is running will pause the countdown.
Press the DOWN button to reset countdown.
Display Backlight
Press the LIGHT button to illuminate the display,
which will remain illuminated for 4-5 seconds un-
less another button is pressed within this time
frame in which case the backlight will stay on for
another 4-5 seconds. Note that the backlight is in-
active in timer use. Pressing on the LIGHT button
while the timer is in detection mode will stop the
timer from recording further and display the last
shot, shot number and split.
Stopwatch/Countdown Mode
While in Stopwatch/Countdown mode, press the
SET button to toggle between Stopwatch, 3 min
countdown and 5 min countdown. Press START to
activate.

Double-Alpha Academy B.V.
Elzenweg 33b
5144MB Waalwijk, Netherlands
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.doublealpha.biz