Dragon Touch K4W10 User manual

USER MANUAL
Dragon Touch K4W10 HD NVR KIT
v1.0

What's in the Box
Introduction
Specifications
Installation and Connections
Menu Operation
Legal Disclaimer
Regulatory Information
EU Conformity Statement
Safety Instructions
Preventive and Cautionary Tips
Contact Us
2
3
4
5
8
30
30
31
32
33
33
CONTENTS
1
EN

WHAT'S IN THE BOX
2
NVR × 1 Security Camera × 4 Mouse × 1
Antenna Extension
Cable × 1
Network Cable × 1Power Adapter × 5
Quick Start Guide × 1
V1.0
Quick Start Guide
Dragon Touch K4W10 HD NVR KIT
EN

3
INTRODUCTION
1. NVR Front Panel
2. Rear Panel
Antenna
Alarm Indicator
Power Indicator
REC Indicator OK Button Menu
ESC
Audio-Out
VGA
HDMI
RJ45
USB
DC
Antenna PortAntenna Port
USB
EN

4
SPECIFICATIONS
1. NVR (Network Video Recorder)
EN
Type 3MP Wireless NVR
NVR Chip HISILICON chip
Video Input 8 channels
Audio Compression
Video Compression
Operating System Embedded LINUX
Recording Mode
Sync Playback Supports 8-channel 720P/960P/1080P
synchronous playback
Playback Speed 1/4, 1/2, 2X, 4X
Storage & Backup Hard disk, USB drive
Antenna
Wireless Transmission
Range
394 ft (120 m) without obstacles, 98.4 ft (30 m) through
walls (actual range varies depending on the environment)
Video Input Capabilities
Video Output Capabilities
Interface
HDD
Remote Access
Network
Other Features
G.711
H.265/H.264
Manual/Motion Detection/Schedule/Alarm/
Human Recognition
2 × 5dB antenna with built-in professional
enhanced wireless reception
Supports 8-channel 3MP video signal input and
8*1080P/8*960P/8*720P
720P60, XGA, 1080P60
VGA port, HDMI port, RJ45 port, USB ports,
DC12V input jack
Supports up to 8TB SATA HDD (HDD not included)
Supports Android, iOS smartphone, webpage access
2.4G wireless network
Digital WDR, 3D noise reduction,
Day/Night switch, flip, etc.

5
EN
INSTALLATION AND CONNECTIONS
1. Installation
USB
Note:
• Internet connection is required for remote viewing.
• Do not connect the NVR to a computer directly. It must be connected to a TV or
monitor only.
Connect the
monitor
Connect the
mouse
Connect the NVR and
IPC antenna
Connect to
power
(IPC and NVR)
Connect the
router
(LAN or Wifi)
LAN/Wifi
EN
2. Camera
Image Sensor: HISILICON 3MP image sensor
Video Compression: H.265/H.264
Recording Mode: Manual/Motion Detection/Schedule/Alarm/Human Recognition
Input: DC 12V
Antenna: Built-in professional enhanced wireless reception

6
Correct method Incorrect method
2. Hard Disk Installation
The NVR system requires a 3.5" or 2.5" SATA internal hard drive or mobile hard
disk drive for video recording. Without installing a hard drive, the system can
display real-time video, but cannot record or play back video footage. The system
supports a hard drive of up to 8TB.
Note:
• Hard disk drive sold separately.
• Installing a 2.5-inch SATA hard drive may require a bracket (sold separately).
①Remove the screws ②Remove the cover
EN

7
④ Connect the power wire③Connect the data wire
⑥Put the cover back, and secure
the screws of the cover
⑤Secure the screws of the hard drive
Note:
• Please power off the NVR before you install the hard drive.
• The system cannot record or play back video without a hard drive.
EN

8
MENU OPERATION
1. Startup Wizard
After booting up the NVR, the Startup Wizard will be displayed on the screen. If you
don't want to see the Startup Wizard next time, you can check and enable
"No more hints", then click [Next].
2. Modify Password
The first time you run the NVR, you must log in and set a new password. There is
no need to enter a password when you log in for the first time. Just click [OK] to
log in and click [OK] to set a new password.
[New]: Input a new password.
[Confirm]: Retype the same password.
EN

9
3. Safety Question
Set a safety question to reset the NVR password if you forget it, then click [Next].
[Question]: Select a security question.
[Answer]: Enter the answer.
[Way to receive verification code]: Supports monitor APP or email.
EN

10
4. Time-Language Configuration
Enter Startup Wizard and click [Next] to go to this interface.
[Time Zone]: Set and select the time zone.
[System Time]: Set the system date and time.
[Date Format]: Choose the date format: YMD, MDY or DMY.
[Date Separator]: Choose the separator of the date format.
[Time Format]: Choose the time format: 24-hour or 12-hour.
[Language]: Select your preferred language.
5. Wireless Device List
Click "Wireless" in the shortcut menu to add a camera.
[Wired Configuration]: Search/add/delete/clear IP channels.
[Repeat Set]: Set the wireless relay transmission mode.
[Code for Wireless]: Pair the camera and NVR wireless signal.
EN

11
[NETIP]: Select network protocol.
[Search]: Search IP cameras in the same LAN.
[Add]: Add a camera to the list.
[Quick set]: System auto search and add cameras.
[Delete]: Delete an IP camera in the same LAN.
[Clear]: Delete all added cameras.
[Encode]: Pair a camera in the same LAN.
EN

12
6. Install the Mobile App
[Serial Number]: Scan the QR code to add a device to the app.
[APP]: Scan the QR code to download the HOMEVIZ app, which is available on the
App Store and Google Play (for Android and iOS mobile phones).
7. Exit Startup Wizard
Click "OK" to exit the Startup Wizard.
EN

13
8. Access by Mobile Phone
For Android Devices
1) Install the HOMEVIZ app for free from Google Play. Tap the app icon to open the
app.
2) Tap [Register] to create a new account, then log in by inputting the user name
and password.
3) Tap [+] to add a new device.
4) Configure the following:
Network video recorder
Add camera
Wireless camera
Add WIFI wireless webcam
Network video recorder
Add network video recorder
Add a camera
OK
Please enter the device name
Please enter the device serial number
User name (default is admin)
Password (empty by default)
①[Device Name]: Input a name for your system.
②[ ]: Scan the QR code in the NVR Guide to get the serial number.
The Guide will pop up when you power on the NVR for the first time and you
can find it on the NVR's quick menu. If you cannot scan the QR code, go to
[Main Menu] →[Advanced] →[Version] →[Serial Number] to get the serial
number and input it manually.
③[User Name]: admin
④[Password]: The password is the same as the NVR's password.
EN

14
5) Tap OK to add your device to the app.
6) Whenever you open the HOMEVIZ app,
the Device List window will pop up first.
From here, you can access video from
all connected cameras. Just tap the
device you want to view.
Device List
30b70c42c6583362
D01 Online
D02
D03
D04
D05
D06
D07
D08
Online
Online
Online
Online
Online
Online
Online
Device Cloud event Album My
9. Share Access with Your Friends
You can share access to your camera with your friends via your mobile phone.
Step 1: On your mobile phone, open the HOMEVIZ app and tap [ ] and
[Share to friends].
Device List
30b70c42c6583362
D01 Online
D02
D03
D04
Online
Online
Online
Device Cloud event Album My
Device List
30b70c42c6583362
D01 Online
D02
D03
D04
Online
Online
Online
Device Cloud event Album My
Delete
Modify device name
Share to friends
30b70c42c6583362
30b70c42c6583362
Cancel
EN

15
Step 2: On your friends' mobile phone, open the app, tap [ ] and scan the QR
code that you sent.
Then your friends can access your camera.
10. Recording Settings
1. Make sure the hard disk drive has been installed in advance, then go to the
NVR's [Main Menu] →[Advanced] → [HDD Info] to confirm that the status of
the hard disk drive is [Normal].
Go to the NVR's [Main Menu] →[Main Menu] →[Record Conf.] to enter the
recording settings interface. If you set the recording time for 24 hours, the
system will keep recording all day long. Select and check [Regular] (Schedule
recording), [Detect] (motion detection recording) or [Alarm] (other alarm
recording such as video loss recording), then click [OK] to save.
Device List
30b70c42c6583362
D01 Online
D02
D03
D04
Online
Online
Online
Device Cloud event Album My
Scan QR code
Please scan the QE code in the desktop system of
the video recorder device
To add or reuieve the password , or add other
devices, please tap
Turn...flash Alarm
EN

16
[Channel]: Select the corresponding channel number to set the channel.
[Redundancy]: Click and check this option to double backup the file. If your system
supports the installation of two hard drives, every video file will be duplicated to be
saved on each. Make sure that two hard disks are installed. One is the read-write
disk and the other is the redundant disk.
[Length]: Set the time length of each video file. 60 minutes is the default value.
[Mode]: Set video state: schedule, manual or stop.
[Week]: Select day of the week.
[Period]: Set the time section of common recording. The recording starts in the
set range only.
[Recording Type]: Set the recording type: regular, detect or alarm.
①Regular: Continuous recording according to the time period.
②Detect: Records a video once motion is detected during the time period. Please
use this mode for light alarm cameras.
③Alarm: For hardware alarms.
EN

17
11. Playback
There are two methods for playing back video files on the hard drive.
① Right-click the mouse and select [Playback] in the menu list.
② Enter [Main Menu] →[Main Menu] →[Playback].
Playback mode includes Common Playback, Sync Playback, Dayparting, Smart
Express and Smart Search.
EN

18
[Common Playback]: In Common Playback mode, you can select the channel,
period and date.
[Sync Playback]: Play back multiple channels of video at the same time.
EN

19
[Dayparting]: Play back multiple videos of the same channel at the same time.
[Smart Express]: Intelligently fast forward the specified file type.
EN