Draper 12044 User manual

These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
12044

DIAGNOSTIC & ELECTRONIC
SERVICE
TABLET

- 2 -
1. TITLE PAGE
1.1 INTRODUCTION:
USER MANUAL FOR: Diagnostic & Electronic Service Tablet
Stock No: 12044
Part No: FCR-MOT
As our user manuals are continually updated, users should make sure that they use
the very latest version.
Downloads are available from: http://drapertools.com/manuals
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Diagnostic helpline: [phone]
Diagnostic help email: [email protected]
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
WARNING! – Information that draws attention to the risk of injury or death.
CAUTION! – Information that draws attention to the risk of damage to the product or
surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational use
only. Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any
other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
1.2 REVISIONS:
Date first published March 2018.
Date first revision December 2020.
©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

- 3 -
1. TITLE PAGE
1.1 INTRODUCTION..........................................................................................................2
1.2 REVISION HISTORY ..................................................................................................2
1.3 UNDERSTANDING THIS MANUAL .............................................................................2
1.4 COPYRIGHT NOTICE ................................................................................................. 2
2. CONTENTS
2.1 CONTENTS .................................................................................................................... 3
3. GUARANTEE
3.1 GUARANTEE ...............................................................................................................4
4. INTRODUCTION
4.1 SCOPE.........................................................................................................................5
4.2 SPECIFICATION ..........................................................................................................5
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS .........................................................................6
5.2 SPECIFIC SAFETY INSTRUCTIONS.......................................................................... 6
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION ......................................................................................................... 7
7. UNPACKING AND CHECKING
7.1 PACKAGING ...............................................................................................................8
7.2 WHAT’S IN THE BOX?.................................................................................................8
8. PREPARATION & CONNECTIONS
8.1 VEHICLE TO TABLET CONNECTION.........................................................................9
8.2 VCI CONNECTOR .....................................................................................................10
8.3 CHARGING & TURNING ON.....................................................................................10
8.4 NETWORK SETUP....................................................................................................10
9. REGISTER & UPDATE
9.1 REGISTER & UPDATE ............................................................................................. 11
10. CONNECTION
10.1 PREPARATION ..........................................................................................................12
10.2 LOCATE VEHICLE’S DLC ......................................................................................... 12
10.3 CONNECTION ...........................................................................................................12
11. START DIAGNOSTICS
11.1 START DIAGNOSTICS ..............................................................................................13
12. DISPOSAL
12.1 DISPOSAL .................................................................................................................. 14
DECLARATION OF CONFORMITY .............................................................................. ENCLOSED
2. CONTENTS

- 4 -
3. GUARANTEE
3.1 GUARANTEE
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact:
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: [phone] or:
Diagnostic Helpline: [phone].
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months
from the date of purchase except where tools are hired out when the guarantee period is 90 days
from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee
does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless
or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other
than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be
quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.

- 5 -
4. INTRODUCTION
Note: Draper Tools accepts no responsibility for any
accident or injury arising from servicing the vehicles
system. When interpreting results from the vehicle, always
follow the manufacturer’s recommendation for repair.
4.1 SCOPE
Advanced diagnostic tool, covering 48 vehicle manufactures and 10 service functions ,providing
full EOBD II function,Oil reset, EPB, Battery management system reset, steering angle sensor
reset, ABS brake bleeding reset, Diesel particular fuel reset, injector programming, Anti-theft
matching, TPMS reset, Throttle matching,data record and replay, prints data via a PC, multilingual
support- All updatable via the internet. Any other application is considered misuse.
4.2 SPECIFICATION
Stock No’s. ............................................................................................................................... 12044
Part No’s. .......................................................................................................................... FCR-MOT
Rated input .......................................................................................................................... 5V 1A
Weight .................................................................................................................................... 0.56kg

- 6 -
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS
For your own safety and the safety of others, and to prevent damage to the equipment and
vehicles. The safety messages presented below and throughout this user’s manual are reminders
to the operator to exercise extreme care when using this device. Always refer to and follow safety
messages and test procedures provided by vehicle manufacturer. Read, understand and follow all
safety messages and instructions in the full online manual.
Safety Message Conventions Used
We provide safety messages to help prevent personal injury and equipment damage. Below are
signal words we used to indicate the hazard level in a condition.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious
injury to the operator or to bystanders.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious
injury to the operator or to bystanders.
Indicates a potentially hazardous situation which, if not avoided, may result in moderate or minor
injury to the operator or to bystanders.
5.2 SPECIFIC SAFETY INSTRUCTIONS
And always use your scanner as described in this manual, and follow all safety messages.
Do not route the test cable in a manner that would interfere with driving controls.
Do not exceed voltage limits between inputs specified in this user’s manual.
Always wear approved goggles to protect your eyes from propelled objects as well as hot or
caustic liquids.
Fuel, oil vapours, hot steam, hot toxic exhaust gases, acid, refrigerant and other debris produced
by a malfunctioning engine can cause serious injury or death. Do not use the scanner in areas
where explosive vapour may collect, such as in below-ground pits, confined areas, or areas that
are less than 18 inches (45 cm) above the floor.
Do not smoke, strike a match, or cause a spark near the vehicle while testing and keep all sparks,
heated items and open flames away from the battery and fuel / fuel vapours as they are highly
flammable.
Keep a dry chemical fire extinguisher suitable for gasoline, chemical and electrical fires in work
area.
Always be aware of rotating parts that move at high speed when an engine is running and keep a
safe distance from these parts as well as other potentially moving objects to avoid serious injury.
Do not touch engine components that get very hot when an engine is running to avoid severe
burns.
Block drive wheels before testing with engine running. Put the transmission in park (for automatic
transmission) or neutral (for manual transmission). And never leave a running engine unattended.
Do not wear jewellery or loose fitting clothing when working on engine.
!
DANGER
!
WARNING
!
WARNING
!
CAUTION

- 7 -
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION
(1) Power button.
(2) Volume up/down button.
(3) Back camera.
(4) Storage for Vehicle Communications Interface.
(5) Universal Serial BUS port.
(6) 7 Inch colour touch screen.
(7) Impact resistant case.
(8) Front camera.
(9) Speaker.
(1) (2)
(5)
(4)
(6)
(7)
(5)
(9)
(8)
(3)

- 8 -
7. UNPACKING AND CHECKING
7.1 PACKAGING
Carefully remove the machine from the packaging and examine it for any sign of damage that may
have happened during shipping. Lay the contents out and check them against the parts shown
below. If any part is damaged or missing; please contact the Draper Helpline (the telephone
number appears on the Title page) and do not attempt to use the machine.
The packaging material should be retained at least during the guarantee period: in case the
machine needs to be returned for repair.
Warning! Some of the packaging materials used may be harmful to children. Do not leave any of
these materials in the reach of children.
If any of the packaging is to be thrown away, make sure they are disposed of correctly; according
to local regulations.
7.2 WHAT´S IN THE BOX?
The packaging contains several parts. Lay out the contents and check off the items against those
featured below.
(10) Carry case.
(11) Vehicle to VCI adaptors.
(12) USB power cable.
(13) 230V to USB plug.
(14) VCI Wifi 16 pin connector.
(10)
(14)
(13) (12)
(11)
(11)

- 9 -
8. PREPARATION & CONNECTIONS
8.1 VEHICLE TO TABLET CONNECTION
The system is mainly composed of tablet and VCI connector (14).
The following illustration explains how the tablet works with the VCI connector.
VCI Connector
(Works as the vehicle
communication interface
device for accessing the
vehicle data.)
To Vehicle's DLC
(For details on how to
connect, please refer to
Section 4 "Preparation &
Connections".)
Tablet
(Works as the central
processor and monitor for
analysing vehicle data and
indicating the test result.)
Network connection
To proceed one of the following operations, you need to make
network connection (See Section 2 "Network Setup" for details):
• Register & activate, update the diagnostic software & APK.
• Surf the Internet.
Technical help
For technical help contact our tech team on
Diagnostic helpline: [phone]
Diagnostic help email: [email protected]
Vehicle
(Wireless connection between vehicle and tablet)

- 10 -
8. PREPARATION & CONNECTIONS
8.2 VCI CONNECTOR
The VCI connector only applies to the passenger vehicles of 12V. It can be installed on the OBDII
vehicle's DLC directly or via the extension cable.
8.4 NETWORK SETUP
This tablet supports WLAN connection.
1. On the home screen, tap "Settings"> WLAN.
2. Slide the WLAN switch to ON, the system starts searching for available WLAN networks.
3. Select a wireless network. If the chosen network is open CRP MOT will connect automatically, if
the selected network is encrypted, a network password will need to be entered.
4. When "Connected" appears, it indicates the tablet is properly connected to the Internet.
*Note: when WLAN is not required this should be disabled to conserve battery power.
OBD II 16pin connector
(For connecting to vehicle's DLC)
Note: Remember to remove the VCI
connector from the DLC and
re-insert it into the slot on the back
of the tablet after use to avoid loss.
8.3 CHARGING & TURNING ON
1. Connect the power adaptor to the Universal Serial BUS port (5) of the tool.
2. If the tool is being charged:
A charging indicator displays.
Once the indicator turns, charging is complete.
3. Pressing the POWER button (1) will start the tool and enter the home screen.
Note: On first use of the tool, or if the tool remains idle for a long period of time, there may be
insufficient battery power to start the tool. Please charge for a minimum of 5 minutes before
attempting to turn it on again. Please use the power adaptor included within the kit to charge the
tool. No responsibility can be assumed for any damage or loss caused as a result of using any
power adaptor other than the one supplied.

- 11 -
9. REGISTER & UPDATE
9.1 REGISTER & UPDATE
1. Launch App-> 2. Create an App Account-> 3. Activate VCI Connector-> 4. Download Diagnostic
Software}
1. Launch App: Tap the application icon to
launch it. Tap "Login" on the right upper
corner of the screen.
a. For initial use, tap "New registration" to
open a sign-up page, refer to steps 2~4.
b. If you have an account, tap "Login" to
login directly.
c. If you forgot the password, tap "Retrieve
password" to retrieve it.
2. Create Account: In Fig. B, fill in each field and tap "Register" to go to step 3. (Note:
To obtain more functions and better service, please enter the real information.)
3. Activate VCI Connector: In Fig. C, input the Product S/N and Activation Code (can be obtained
from the password envelope), and then tap "Activate".
4. Update Diagnostic Software: Tap "Yes" in Fig. D to enter diagnostic software download screen.
(Note: To download the software later, tap " No". In this case, tap "Software Upgrade" on the
function menu to download it.)
Tap "Update" to download and install the diagnostic software. (Note: Be sure that the tool has a
strong WLAN connection during downloading.)
Login
Username
Password
Retrieve password New Registration
Login
A
Create an Account
Congratulations! You have registered successfully. Do you download vehicle software now?
Activate Connector Finish Registration
Yes No
D
Finish RegistrationCreate an Account
Serial Number
Where is my activation code?
Activation Code
Activate Connector
Activate
Product S/N
Activation Code
C
Activate Connector Finish Registration
Register
Create an Account
Username
Password
Confirm Password
Email
Select Country
CAPTCHA CAPTCHA
5169
*
*
*
*
B
Software updates
for the first 12 months
are included. Charges
apply for subsequent
software updates quote
stock no. 94088.
For more information please contact our Customer
Support helpline on [phone].

- 12 -
10. CONNECTION
10.1. PREPARATION
1) Switch the ignition on.
2) The vehicle battery voltage should be 9-14V.
3) Throttle should be in a closed position.
10.2 LOCATE VEHICLE'S DLC
The DLC (Data Link Connector) provides standard 16 pins
and is generally located on driver 's side, about 12 inch away
from the centre of dashboard.
See Figure DLC Location. If DLC is not equipped under
dashboard, a label indicating its position will be given. In case no DLC is found, please refer to
Automobile Repair Manual.
10.3 CONNECTION
Select the desired diagnostic connector according to the vehicle DLC type and then follow the
steps below to proceed:
1. For vehicles equipped with an OBD 11 management system
Plug the VCI connector into the vehicle's DLC directly or use the OBD II extension cable to
connect the VCI connector and the DLC.
2. For vehicles NOT equipped with an OBD 11 management system
Do the following:
1). Select the corresponding non-16pin connector.
2). Plug the non-16pin end of the connector into the DLC socket, then connect the other end
to the OBD I adaptor, and then tighten the captive screws.
3). Connect the other end of the adaptor to the VCI connector.
4). To supply power to OBD I adaptor from:
A. Battery Clamps Cable (optional): Connect one end of the battery clamps cable to
vehicle's battery, and the other end to the power jack of OBD I adaptor,
OR
B. Cigarette Lighter Cable (optional): Connect one end of the cigarette lighter cable to
vehicle's cigarette lighter receptacle, and the other end to the power jack of OBD I
adaptor.
Help
DLC Location
Near centre of dashboard

- 13 -
1. TITLE PAGE
1.1 INTRODUCTION..........................................................................................................2
1.2 REVISION HISTORY ..................................................................................................2
1.3 UNDERSTANDING THIS MANUAL .............................................................................2
1.4 COPYRIGHT NOTICE ................................................................................................. 2
2. CONTENTS
2.1 CONTENTS .................................................................................................................... 3
3. GUARANTEE
3.1 GUARANTEE ...............................................................................................................4
4. INTRODUCTION
4.1 SCOPE.........................................................................................................................5
4.2 SPECIFICATION ..........................................................................................................5
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS .........................................................................6
5.2 SPECIFIC SAFETY INSTRUCTIONS.......................................................................... 6
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION ......................................................................................................... 7
7. UNPACKING AND CHECKING
7.1 PACKAGING ...............................................................................................................8
7.2 WHAT’S IN THE BOX?.................................................................................................8
8. PREPARATION & CONNECTIONS
8.1 VEHICLE TO TABLET CONNECTION......................................................................... 9
8.2 VCI CONNECTOR .....................................................................................................10
8.3 CHARGING & TURNING ON.....................................................................................10
8.4 NETWORK SETUP....................................................................................................10
9. REGISTER & UPDATE
9.1 REGISTER & UPDATE ............................................................................................. 11
10. CONNECTION
10.1 PREPARATION ..........................................................................................................12
10.2 LOCATE VEHICLE’S DLC ......................................................................................... 12
10.3 CONNECTION ........................................................................................................... 12
11. START DIAGNOSTICS
11.1 START DIAGNOSTICS ..............................................................................................13
12. DISPOSAL
12.1 DISPOSAL .................................................................................................................. 14
DECLARATION OF CONFORMITY .............................................................................. ENCLOSED
11. START DIAGNOSTICS
11.1 START DIAGNOSTICS
For new users, follow the sequence below to start a new diagnostic session.
All illustrations are for reference purpose only and this Quick Start Guide is subject to change
without notice.
*Notes:
1. To start diagnosing a vehicle, you have to activate the VCI connector and download the
diagnostic software. For details, refer to Section 3 "Register & Update" in this Quick Start Guide.
2. All software is updated from time to time. To enjoy more better service and functions, you are
suggested to keep updated with the latest version.
Tap "Diagnostic"
Select vehicle model
Select software
Select test function
Select test system

- 14 -
12. DISPOSAL
12.1 DISPOSAL
– At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is
disposed of according to national regulations.
– Contact your local authority for details of collection schemes in your area.
In all circumstances:
•Do not dispose of power tools with domestic waste.
•Do not incinerate.
•Do not abandon in the environment.
• Do not dispose of WEEE* as unsorted municipal waste.
* Waste Electrical & Electronic Equipment.

- 15 -
NOTES

Draper Tools Limited, Hursley Road,
Chandler's Ford, Eastleigh, Hampshire. SO53 1YF. U.K.
Diagnostic Helpline: Tel. [phone]
Sales Desk: [phone]
Internet: drapertools.com
Diagnostic Help Email: [email protected]
General Enquiries: [phone]
Service/Warranty Repair Agent:
For aftersales servicing or warranty repairs, please contact the
Draper Tools Helpline for details of an agent in your local area.
©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
CONTACTS
YOUR DRAPER STOCKIST
DBCM1220