Winmate M700DM4 User manual

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
1
PartNo98TF07MA4001Revision100Station
ProductNameRugged Tablet PCModelNameM700DM4


 

ProductName：RuggedTabletPC
ModelName:M700DM4


STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
2
DocumentHistory

ItemDateRevisionPageDescription
12014/11/30100N/ANewDocumentReleased
2 
3 
4 
5 
6 
7 
8 
9 
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
ApprovedbyRevisedby Madeby
BrainJohnJustin

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
3
TableofContents
BlockDiagram........................................................................................................................................4
Notes&Tools.........................................................................................................................................5
VersionControlTable.............................................................................................................................6
Panel&TouchAssembly........................................................................................................................7
PanelAssembly......................................................................................................................................8
MiddlePlateassembly...........................................................................................................................9
Wi‐FiantennaAssembly......................................................................................................................10
CPUBoardAssembly............................................................................................................................11
IOBoardAssembly...............................................................................................................................12
BackCoverAssembly...........................................................................................................................15
LTEAntennaAssembly.........................................................................................................................16
LTECardassembly................................................................................................................................17
CoverAssembly....................................................................................................................................18
Batterypack.........................................................................................................................................19
TestFlowChart....................................................................................................................................20
LED&ButtonTest................................................................................................................................21
LCD&I/OTest......................................................................................................................................22
SensorTest...........................................................................................................................................24
GPSTest ................................................................................................................................................25
RFTest..................................................................................................................................................26
BatteryTest ..........................................................................................................................................27
CameraTest..........................................................................................................................................28
Six‐SidedFigure....................................................................................................................................29
PackingAssembly.................................................................................................................................30



STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
4
Model98TF07MA4001Revision100Station
OperationNameBlockDiagramRemark

M700DM4-200
IO Board
90IOM7DT4102
Adapter 5V 15W 2.5ψ
9226015W05V1
MK8-200 CPU Board
90MBMK802000
M7T4IC-110 Camera Bridge
90BB7T4IC100
M7T4IK-100 Key Pad Board
90BB7T4IK000
Camera w/o LED
9B000000000H
P-Cap Touch EP0700MLS3
TXCP0700MLS3
Wi-Fi Antenna
39700010000I
Panel 1024*600 500nit
111H0700EG00
4G LTE WWAN Card
9B000000004E
M7T4IM-100 Machine Pin
90BB7T4IM000
M7T4IL-100 LED Board
90BB7T4IL000
GPS Antenna
397000000005
94DG12G120A0
94DG12G120B2
Battery 3.7V 5300mAh
320403704005
LED Board for Camera
9B000000000S
LTE MAIN Antenna
39700030001A
LTE AUX Antenna
39700030001B

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
5
PartNo98TF07MA4001Revision100Station
OperationNameNotes&ToolsRemark


















ATTENTION:Remarks
1.PleaseputonapairwhiteESDglovewhenworking.
2.PleaseputontheESDbeltwhenworking.
3.Payattentiontothetorqueofelectricscrewdriver.
4.Makesureallscrewsaretightwithoutloose.
5.Nothreadstrippedhappen.
Tools:Remarks
1.ElectricScrewdriver(refertoMIPD015ElectricScrewdriverTorque
CalibrationStandardProcedure)

2.WhiteESDglove
3.ESDbelt
4.HotGlueGun
Note:Remarks
PleaserefertothedetailedBOM(includeBIOS&RecoveryCD)fromthe
EIPsystem.

UseNylonscrewsordispenserswhenassembling. 
Usehotglueguntoconnectalljunctionsprecisely. 
Expendables:Remarks
MIPD015ElectricScrewdriverTorqueCalibrationStandardProcedure 
MIPDXXXBoardGluingStandardOperatingProcedure


STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
6
Part No 98TF07MA4001 Revision 100 Station
Operation Name VersionControlTableRemark
ItemDevicePartNumberModelNameFirmware
Version
HW
CPUBoard90MBMK802000MK8V200
IOBoard90IOM7DT4102M700DM4V200
CameraBridge
Board90BB7T4IC100M7T4ICV110
KeyPADBoard90BB7T4IK000M7T4IKV100
LEDBoard90BB7T4IL000M7T4ILV100
MachinePinBoard90BB7T4IM000M7T4IMV100
Panel111H0700EG00FG07W0DSSWAGL1 
TouchTXCP0700MLS3EP0700MLS3
ME
FrontCover90ME02000039 V100
RearCover88070T044201 V120
MiddlePlate82W70A11T500 V150
IOCover88070T261204 V100
SW
AndroidVersion  4.2.1
BasebandVersion  SWI9X15C_05.05.16.00r21040
carmd‐fwbuild1
KernelVersion  3.4.5
Ryan1@SW110#9
Buildnumber  ALPS.W10.24.p0
Custombuild
Version
 M700DM4_SIERRA_HWV1.3_v141125
Accessory
Battery320403704005 
Adapter9226015W05V13A‐182WP05
Adapter604610606004EuropeStandard
Camera9B000000000H 
LEDforCamera9B000000000S 
LTEWWANCard9B000000004EMC730405.05.16.00Generic


STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
7
Part No 98TF07MA4001 Revision 100 Station
Operation Name Panel&TouchAssembly Remark
Item Material:
A 90ME02000039
B 9117070K8000
C TXCP0700MLS3
Step Assembly Description：
1
Remove paper on the adhesive tape then
unite the Plastic cover (A) onto the Frame
(B)
2 Affixed the Touch(C) onto the Front Cover
carefully.
3 Protect the Touch sensor using insulating
tape.
Item Tools：
1 Insulating tape
Item Note：
1

STEP 3
STEP 1
A B
STEP 2
C

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
8
Part No 98TF07MA4001 Revision 100 Station
Operation Name PanelAssemblyRemark
Item Material：
A 111H0700EG00
Steps Assembly Description：
1
Using W2xH0.5mm double sided adhesive
tape stick the Panel (A) around its four
sides.
2 Make sure to protect Panel cable using
insulating tape.
3
On the Panel laminated strip on the back,
measure the outer edge and stick using
W3xH0.5mm double sided foam tape. Do
not stick on the area (Marked in yellow) to
avoid over voltage.
4 Fix the Panel on the Front Cover
Item Tools：
1 Insulating Tape
2 W2xH0.5mm Double sided foam
3 W3xH0.5mm Double sided adhesive tape
Item Note：
1
Makesuretokeeptheareaclean
betweenPanelandTouchwhile
attachingthemtogether.

STEP 3
STEP 3, 4
STEP 1, 2
A

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
9
Part No 98TF07MA4001 Revision 100 Station
Operation Name MiddlePlateassemblyRemark
Item Material：
A 90BB7T4IK000
B 90BB7T4IL000
C 9156070K9F00
D 82W70A11T500
E 9128070K1100
Item Assembly Description：
1 Put on the Dome of the Button(C) into the
Key Pad plate(A)
2 Fix the LED plate (B) use Philips pan
screw M2 x4mm to lock the front frame.
3 Fix the Key Pad switch board into the front
frame
4
Use Philips pan screw M2x4mm(marked in
blue circle) )and Philips pan screw
M2.5x4mm(marked in green circle)and
lock the partition Middle plate(D)
5 Place the water proof O-RING (E) into the
front frame.
Item Tools：
1 Philips Pan Screw M2x4mm
2 Philips Pan Screw M2.5x4mm
Item Note：
1

STEP 1
A C
STEP 2, 3
B
STEP 4, 5
D
E

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
10
Part No 98TF07MA4001 Revision 100 Station
Operation Name Wi‐FiantennaAssembly Remark
Item Material：
A 39700010000I
Steps Assembly Description：
1
Fix the Wi-Fi antenna (A) to the front
frame, the copper foil must affixed into the
middle plate and follow cable alignment
approximately left direction.
2
Use insulating tape to fix Wi-Fi antenna
cable make sure to follow proper alignment
along the line at the back and not interfere
other cable.
Item Tools：
1 Insulating tape
Item Note：
1 Note the antenna outlet and proper
alignment.

STEP 2
STEP 1
A

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
11
Part No 98TF07MA4001 Revision 100 Station
Operation Name CPUBoardAssemblyRemark
Item Material：
A 60ZZ60500000
B 90MBMK802000
Steps Assembly description：
1 Set up to stick on the back, the Absorbing
material (A) from the CPU Board(B)
2
On the front part of absorbing material,
must temporary not to post on the CPU
Board
Item Tools：
1
Item Note：
1

STEP 2
STEP 1
A
B

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
12
Part No 98TF07MA4001 Revision 100 Station
Operation Name IOBoardAssemblyRemark
Item Material：
A 90IOM7DT4102
B 9117070K9106
C 94DG12G120A0
D 94DG12G120B2
Steps Assembly Description：
1
Use Philips Screw M1.6x3mm(marked in
green circle) into CPU Board to lock IO
Board(A)
2 Cover up Rubber sponge onto Battery
Connector (marked in yellow)
3 The 12 pin point out FFC(C) connect to
CN1
4 The 12 pin on the other side
FFC(E)connect to CN4
5
IO shown in the figure (marked in red box)
stick W8xH3mm single sided Adhesive
tape(B)
Item Tools：
1 Philips Screw M1.6x3mm
Item Note：
1

STEP 1, 2
A
STEP 5
B B
STEP 3, 4
C
D

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
13
Part No 98TF07MA4001 Revision 100 Station
Operation Name IOBoardAssembly(一)Remark
Item Material：
A 前述半成品
B 90BB7T4IC100
C 9163070K9002
Steps Assembly Description：
1 Connect the Touch Cable to the IO board
2 Connect the Panel Cable to the IO board.
3
Use Philip screw M2.5x4mmm (marked in
green circle) at the IO lock the middle
plate, then Connect FFC Cable and secure
with adhesive tape.
4
Connect the Camera Bridge Cable(B) and
use hot melt glue onto the fixed point, then
along the edge of the CPU Board affixed
GPS conductive fabric +Mylar(C)
Items Tools：
1 Philip Screw M2.5x4mm
2 Hot melt Glue
Items Notes：
1

STEP 3
STEP 1, 2
A
STEP 4
C
B

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
14

Part No 98TF07MA4001 Revision 100 Station
Operation Name IOBoardAssembly(二)Remark
Items Material：
A 397000000005
B 9B000000000H
C 9B000000000S
Steps Assembly Description：
1
Affixed the conductive sponge to
GPS ,then the wifi antenna must connect to
CPU Board, follow antenna alignment as
shown in the figure (marked in red)
2 The Camera(B)Across LED Board(C)must
installed to IO Board
3
The GPS antenna (A) must connected to
CPU Board then fix antenna location,
follow GPS antenna alignment as shown in
the figure.
item Tools：
1 Insulating tape
Item Note：
1
GPS antenna required along the CPU
Board perimeter routing, not above CPU
Board, do not press on top of the CPU steel
when closing the back cover to prevent
over pressure.
2
The GPS antenna position must
approximately between the 2 screw hole in
the middle position.
STEP 1
STEP 3
A
STEP 2
B
C

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
15
Part No 98TF07MA4001 Revision 100 Station
Operation Name BackCoverAssemblyRemark
Items Material：
A 61252000000K
B 88070T044201
C 88070T261204
D 90BB7T4IM000
E 916211109101
Steps Assembly Description：
1 Back Cover(B) Paste SPK with water proof
Fabric E) and fix to IP65 SPK(A)
2 Fix IO cover onto the back cover C)
3 Use black Philip screw M2x4mm (marked
in green circle) to put the Machine Pin
4 Use Water proof glue onto the Machine Pin
to secure wiring hole (marked in red)
Items Tools：
1 Black Philip screw M2x4mm
2 Water Proof Plastic
Items Note：
1

STEP 1
A
E
B
D
C
STEP 2, 4
STEP 3

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
16
Part No 98TF07MA4001 Revision 100 Station
Operation Name LTEAntennaAssemblyRemark
Items Material：
A 39700030001A
B 39700030001B
C 88070T164211
D 9117070K8001
Steps Assembly Description：
1
The LTE Main antenna (A) containing
copper foil and conductive foam sticker
must attached onto the back Cover then
follow illustrated antenna cable alignment
and secured with insulating tape.
2
The LTE AUX antenna(B) must follow
according to the diagram attached to BR
Cover(C)
3
Use adhesive to fix onto Cover (D) the
LTE AUX w/o antenna BR must attach to
the back cover and fix the alignment.
Items Tools：
1 Tape
Items Note：
1

STEP 1
A
STEP 2
B
C
STEP 3
D

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
17
Part No 98TF07MA4001 Revision 100 Station
Operation Name LTECardassembly Remark
Items Material：
A 9B000000004E
Steps Assembly Description：
1 Use Philip pan Screw M2x4mm(marked in
red circle)to the LTE Card(A)
2
The LTE AUX antenna guide must attach
the conductive foam toward the bottom of
the separator as shown in the figure.
Item Tools：
1 Philip pan screw M2x4mm
Item Note：
1 The conductive foam must contact the
bottom of the separator.

STEP 1
A
STEP 2
STEP 2

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
18
Part No 98TF07MA4001 Revision 100 Station
Operation Name CoverAssemblyRemark
Item Material：
A 88070T161311
Steps Assembly description：
1
The wifi antenna must connect to LTE
MAIN (marked in red box) and other wifi
antenna must connect to LTE AUX
(marked in green box)
2 Connect Machine Pin & SPK alignment. do
not block (marked in orange)Vibrator
3 Use PH dome screwM2.5x5mm (marked
in blue) at lock cover.
4
Use I-head screw M2.5x5mm (marked in
Purple and flathead screw M2.5x7mm
(marked in green) lock BR cover
5 Paste camera Lens(A)and safety stickers
etc.
Items Tools：
1 Philip dome screw M2.5x5mm
2 I -head screw M2.5x5mm
3 Flat head screw M2.5x7mm
Items Note:
1

STE
P 1
STEP 2
STEP 3, 4, 5
A

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
19
Part No 98TF07MA4001 Revision 100 Station
Operation Name BatterypackRemark
Item Material：
A 320403704005
B 9128070K9100
Items Assembly Description：
1 The Battery Pack(A) affixed the battery
water proof ring(B)
2 After performing the testing process, Load
the Battery pack.
Item Tools：
1
item Note：
1

STEP 2
STEP 1
A B

STANDARDOPERATIONPROCEDURE
(DO NOT COPY OR DISTRIBUTE W ITHOUT PERMISSION) FMRD33B
20
Part No 98TF07MA4001 Revision 100 Station
Operation Name TestFlowChartRemark
M700DM4 Flow Chart

LED & Button
LCD
I/O
Sensor
RF
Battery
Post Burn in Test
Camera
Burn in
Packing
Testing process Test Items
LED & Button
LED
Power Button
Keypad
Volume +/-
LCD Brightness
I/O
Headset
Speaker
Micro SD
Micro USB (OTG)
Touch
Sensor
G-Sensor
Gyroscope
Light Sensor
Vibrator
RF
GPS
LTE WWAN
Wi-Fi
BT
Battery Battery
Camera Camera
Flash