Dundalk LeisureCraft Lounge Bench User manual

Position assembly in place and secure to sauna
walls and floor using 2 ½” screws.
*Be careful not to screw into any stave joints.
Place lounge bench on top of bench support.
Dundalk LeisureCraft Lounge Bench
ssembly Instructions
Using the pre drilled holes, assemble the lounge
bench support to the longer front lower bench
wall using 2” screws.
Install the flat floor in the middle of the sauna
making sure it is level.

Ensure bench is flush and secure with 2 ½”
screws.
If the porch option is selected, start by installing floor
ensuring it is level.
Secure with 2” screws.
Dundalk LeisureCraft Lounge Bench
ssembly Instructions
ssemble bench support to the short front lower
bench wall in the same manner as in opposite
bench.
Secure to floor and walls ensuring bench is level.
Ensure bench is flush with bench support and
secure with 2 ½” screws in pre drilled holes.
* If sauna is purchased with wood burning heater, repeat
process for opposite bench.
* If electric heater is chosen, continue onto next step.

Install backrest with 2” screws at desired height making
sure that the lounge bench can still operate correctly.
Repeat for other side.
Dundalk LeisureCraft Lounge Bench
ssembly Instructions
Fasten bench to floor and sauna wall using 2 ½”
screws.
Repeat process for other bench.
ssemble the 2 pieces for the porch seat together
using 2 ½” screws.
.
Congratulations on the assembly of your
Dundalk Leisurecraft Lounge Bench!
.