DW 9000 Series User manual

Section 1: Leg Assembly and Base Section Adjustments
Section 1.1: Leg Assembly
1. Loosen wingscrew on the clamp at top of base section.
2. Pull legs outward far enough to allow the clamp to contact memory lock.
3. Tighten wingscrew.
To open or close the legs, loosen the drumkey screw on the leg memory lock located on
the bottom tube section. Loosen the wingscrew on the clamp at top of base section and
adjust the tripod to achieve the desired position. Then tighten the clamp and memory
lock screw.
Section 2: Height Adjustments
Section 2.1: Tube Sections and Receivers
1. Loosen the memory locks and wingscrews on tube receivers.
2. Raise or lower the upper tubing section to the desired position.
3. Tighten memory locks and wingscrews on tube receivers.
Section 3: Tom Arm and Accessory Clamp Adjustments
Section 3.1: Tom Arms
1. Loosen the large wingnut on the top of the ball-in-socket clamp.
2. Rotate arm to desired position and angle.
3. Tighten wingnut.
Note: To replace the standard 1/2” arm to accommodate other size tom brackets and
accessories, remove the wingnut, washer and bolt from the ball-in-socket clamp and
replace the standard arm with an optional 10.5mm arm (sold separately). Replace and
tighten the screw, washer and wingnut.
Section 3.2: 3-Way Accessory Clamp
The 9900 features a 3-Way clamp that can accommodate a variety of available accessory
arms and holders. To use the clamp:
1. Loosen the wingnut and long nut to open the clamp.
2. Insert the tube, arm or accessory in the space between the clamp and platform.
3. Tighten the wingnut and long nut evenly to maintain even space on both sides of the
clamp.
Section 4: DogBone™ (optional) Adjustments
The DogBone is supplied in a compact state. To open the DogBone for use with the
9900, loosen all wingnuts and pull arm outward (if included), then place the open
(unused) clamp end over the tom arm so that the arm goes through the boom casting
and into the DogBone shaft. Adjust the position and angle as desired and tighten the
clamp wingnuts.
Section 4.1: Straight/Boom Casting
DW’s Straight/Boom Casting utilizes an exclusive double-sided clamp with one side
used to adjust the distance and balance of the arm and the other controlling its angle.
This casting is also designed to allow the DogBone to be converted from a boom to a
straight cymbal holder by positioning the angle of the arm so that it is vertical and then
telescoping it through the casting and into the top of the upper tube section. To adjust
either one of the positioning adjustments, loosen the respective wingnut on the clamp,
position the arm as desired and retighten the wingnut.
Section 4.2: Boom Arm
1. Loosen the drumkey screw on the boom arm memory lock.
2. To adjust the distance of the arm, loosen the distance clamp wingnut and position
the arm as desired.
3. Tighten the distance clamp wingnut.
4. Move the boom arm memory lock so that it interlocks with the notch in the top of
the straight/boom casting and tighten the drumkey screw on the memory lock.
Section 4.3: Tilter Adjustments
1. Loosen the TechLock on the tilter section.
2. Loosen the Position Reset Handle.
Note: The Position Rest Handle is spring activated. To operate, grasp the handle with
your  ngers and use your thumb to press on the button in the center of the handle
DW 9900 DOUBLE TOM STAND
Remove the stand and all packing materials from the box, then follow these instructions to set up and adjust your stand to  t the way you play.
9900
9900
while pulling the handle away from the tilter. Reset the handle to a more comfortable
position and release.
3. Adjust the angle of the tilter and retighten the Position Reset Handle and TechLock.
Section 4.4: Cymbal Space Adjustment
1. Loosen the drumkey screw on the cymbal seat/cymbal space mechanism.
2. Spin the mechanism to open or close the amount of space between the upper and
lower cymbal felts and the cymbal. Be careful to leave some slack in the spacing as this
will allow the cymbal to sound fuller and prevent cracking.
3. Adjust the angle of the tilter and retighten the Position Reset Handle and TechLock.
Section 4.5: Drop-Resistant Wingnut
The contoured wingnut and cymbal stem feature a drop-resistant design for faster set up
and pack up as well as increased security. To remove the wingnut, gently spin it coun-
terclockwise. To replace the wingnut, spin it clockwise so that it securely contacts the
cymbal sleeve.
mounting platform & auxiliary clamp
Ball-In-Socket Arm
Upper Tube
Tube Memory Lock
Tube Receiver
Base Section
Leg Clamp
Leg Memory Lock
Legs
Ball-In-Socket Wingnut
Auxiliary Clamp
Wingnut
Long Nut
Instructions and parts identi cations also apply to 9799, 9934, 9991 and 9999 stands.
DogBone™
DogBone™
DogBone™

Drop-Resistant Wingnut
Drop-Resistant Wingnut
Drop-Resistant Wingnut

Felt Washers
Felt Washers
Felt Washers

Cymbal Seat
Cymbal Seat
Cymbal Seat

Cymbal Space Adjustment
Cymbal Space Adjustment
Cymbal Space Adjustment

Universal Angle Adjustment
Universal Angle Adjustment
Universal Angle Adjustment


TechLock™
TechLock™

Position Reset Handle
Position Reset Handle
Position Reset Handle


Boom Arm
Boom Arm

Straight/Boom Casting
Straight/Boom Casting
Straight/Boom Casting














The Drummer’s Choice
®
DRUM WORKSHOP, INC
3450 Lunar Court • Oxnard, CA 93030 USA
www.dwdrums.com
speci cations subject to change without notice
PR-OM-9900 © DW 2004
OWNER’S MANUAL
O W N E R ’ S M A N U A L
9000
SERIES
TOM-TOM
STANDS
T
T
hanks for purchasing this DW product. It has been designed and manufactured to
hanks for purchasing this DW product. It has been designed and manufactured to
Thanks for purchasing this DW product. It has been designed and manufactured to T
provide a lifetime of trouble-free service. Please take a moment to familiarize your-
provide a lifetime of trouble-free service. Please take a moment to familiarize your-
self with the exclusive features and operating suggestions contained in this manual
self with the exclusive features and operating suggestions contained in this manual
in order to ensure its optimum performance. Should you have any further questions,
in order to ensure its optimum performance. Should you have any further questions,
feel free to contact your local authorized DW dealer.
feel free to contact your local authorized DW dealer.
— Don Lombardi
— Don Lombardi
president, Drum Workshop, Inc.
president, Drum Workshop, Inc.
DW 9900 Double Tom & Multi-Purpose Stand
DW 9900 Double Tom & Multi-Purpose Stand
DW HARDWARE
DW HARDWARE
5-YEAR LIMITED WARRANTY
For a period of  ve years from the date of purchase, Drum Workshop, Inc.
For a period of  ve years from the date of purchase, Drum Workshop, Inc.
guarantees the original owner, when presented with proof of purchase, that
guarantees the original owner, when presented with proof of purchase, that
all 9000, 5000 and 6000 Series Hardware cast parts are free of material
and manufacturing defects. This warranty is limited to cast parts only. This
warranty does not include moving parts. If, under normal playing conditions,
warranty does not include moving parts. If, under normal playing conditions,
parts covered in this limited  ve year warranty fail, they will be replaced at
no charge. Return the item to your authorized DW dealer or, if there is not
a dealer in your area, contact DW directly. DO NOT send products to DW
without  rst receiving a Return Authorization Number. Shipping charges to
without  rst receiving a Return Authorization Number. Shipping charges to
DW will be paid by the consumer. DW’s maximum liability pursuant to this
warranty is limited to the monetary value of the product that is the subject
warranty is limited to the monetary value of the product that is the subject
of the warranty claim. This is a summary only; please see the actual limited
warranty for additional terms and conditions.
warranty for additional terms and conditions.
A wide range of DW 9000 Series Stands, Pedals, Thrones
and Accessory Clamps and Arms are now available.
Contact your authorized DW dealer
for additional accessories and replacement parts.
9300
9300
9934
9934
9900
9900
9710
9710
9700
9700
9500
9500
9100
9100
9120
9120
snare
double
double
straight
straight/boom
hi-hat
round
motorcycle
drum
tom/cymbal
tom
cymbal
cymbal
throne
throne