Dyconn TB001-A17 User manual

Single Hole Kitchen Faucet Installation Manual
All of our single hole kitchen faucets are installed using the same
procedure. Design, sizes, and styles may vary. The model illustrated
in this manual is for illustrative and demonstrative purposes only.
Some kitchen faucets come with a soap/ lotion dispenser.
Both installation procedures are outlined in this manual.
All installations should be performed by a licensed professional
www.dyconnfaucet.com
Product Model Number:
Please nd and write your product number down on the provided space above for future reference.
Product model number can be found on the box provided with your product.

SINGLE HOLE KITCHEN FAUCET PARTS AND ACCESSORIES
You may need the following tools/materials
Valve Hoses
(included)
Pliers Screw Driver WrenchSilicone Plumbers Tape
Model Shown: Pull Down Faucet (TB001-A17)
1

Step 1: Unscrew the shank (1) from the faucet (if it is connected) and place it to the
side, along with the rubber gasket (2), washer (3) and mounting nut (4).
Diagram 2
Diagram 1
Kitchen Faucet Installation Instructions
1
3
2
4
Step 2: The short water line is HOT water, while the longer water lineis COLD. Securely
attach both HOT (1) and COLD (2) water hoses to the faucet.
1
2
2

Diagram 4
Diagram 3
Kitchen Faucet Installation Instructions
Step 3: Re-install the shank (1) and base (2), if provided, and proceed to install the
faucet through the deck mounting hole. Attach the gasket (3), washer (4) and
mounting nut (5) onto the shank.
1
3
4
5
2
Step 4: After the faucet is properly positioned, thoroughly tighten the screws on the
mounting nut to secure the faucet in place. Should your faucet have a pull-out
hose, attach the end of it (1) to the line converter (2).
1
2
3

Diagram 6
Diagram 5
Kitchen Faucet Installation Instructions
Step 5: If a weight is provided as a component of your faucet’s assembly, disassemble
it with use of a Phillips screwdriver. Once the weight is separated, attach the
weight (1) onto the pull-out hose (2) at a desired location. Note: The weight
should NOT make contact with the faucet line hoses when the faucet head is
pulled out.
1
2
Screw
Step 6:
plumbing pipes. This debris can damage the internal faucet surfaces which
can cause leakage. Before turning on the water valves, make sure the faucet
4

Diagram 8
Diagram 7
Kitchen Faucet Installation Instructions
Step 7:
Connect both water hoses onto the respective water valves and securely tighten
each mounting nut. Turn your water valves on.
Apply plumber’s tape onto the threading of each water valve.
Step 8:
seconds. Evaluate all connections for leakage. After this process is complete,
you may proceed to use your new faucet.
5

Diagram 2
Diagram 1
Soap/ Lotion Dispenser Installation Instructions
Step 1: Remove soap canister (1), gasket (2) and mounting nut (3) from the soap
If your product comes with a soap/ lotion dispenser, use the following instructions below to install
your product. Note that not all of our faucet products come with a soap/ lotion dispenser. Soap/ lotion
dispensers can be purchased separately.
dispenser’s shank (4). Place the soap dispenser (5) into the deck opening. From
underneath the sink deck, attach the Gasket and mounting nut onto the faucet
shank. Before tightening and securing the mounting nut, make certain the soap
dispenser is properly positioned.
1
4
5
2
3
Step 2:
screw the soap cannister onto the soap dispenser’s shank. Note: The soap
cannister accommodates 8oz. of liquid soap. To clean, reverse the assembly
soap build-up.
6

Phone: [phone] (in the U.S. and Canada)
Email: [email protected]
Write to us:
Dyconn Faucet Warranty
382 N. Lemon Avenue #122
Walnut, CA 91789
Dyconn Faucet warrants its faucet products to be free from manufacturing defects in material and workmanship during the normal non-
commercial use for a period of (3) three years for all non-electrical component items and (1) one year for all electronic component
related items (such as, but are not limited to, products like the sensor faucet and bidet toilet) from the initial purchase date by the
original owner/end-user for personal household use. Dyconn Faucet also warrants its part and accessory products to be free from
manufacturing defects in material and workmanship during the normal non-commercial use for a period of one (1) year from the initial
purchase date by the original owner/end-user for personal household use. This warranty is non-transferable between homes or owners
and only applicable for residential use. Any commercial or industrial use of Dyconn Faucet products automatically void the warranty.
Any warranty claim must include the original sales receipt as proof of purchase from an Authorized Dealer or Distributor of Dyconn
Faucet products. (Authorized Dealers can be found on the Dyconn Faucet website).
Dyconn Faucet recommends installation of all Dyconn Faucet products by licensed professionals. Dyconn Faucet will not be held
responsible for any damages or product failure due to improper installation, misuse or the failure to adequately utilize a licensed
professional. Proper care and maintenance for all products is standard, like any other household appliances and fixtures to ensure proper
function and a lasting product. Instructions are provided in your manual on the proper care and maintenance of Dyconn Faucet products.
This warranty will not cover any damages that might be caused by the product. (In some instances, specific states do not allow for such
limitations, therefore, this may not apply to all owners).
Any and all warranty claims must include the original sales receipt as proof of purchase from an Authorized Dealer or Distributor of
Dyconn Faucet products. Please contact Dyconn Faucet Support or Sales Department for assistance with the verification process. Any
product reported to Dyconn Faucet as defective will be repaired or replaced (with a product of equal value) at the company's discretion.
If Dyconn Faucet is not able to replace or repair the product, Dyconn Faucet may elect to refund the original purchase price to the original
purchaser in exchange for the product's return. Dyconn Faucet has full rights to inspect any Dyconn Faucet product reported as defective
prior to repair or replacement. Any repair and replacement costs EXCLUDE shipping, labor for removal or re-installation, and any
consequential or special damages associated with the return, replacement, and installation of your product. To ease the duration and
financial burdens of the warranty process for our customers, Dyconn Faucet may request images and/or videos of products to assess the
product's condition and determine the necessary replacement parts. Replacement parts and warranty claims may be obtained by
contacting us using one of the following methods:
All Dyconn Faucet products are manufactured and tested with the highest quality standards and rigorous quality control process. This
warranty is limited to the non-commercial use of Dyconn Faucet products purchased and installed in the United States and Canada.
Dyconn Faucet reserves the right to modify the warranty at any time, it being understood that any such modifications will not supersede
warranty conditions that are applicable at the time of the original sale of products in question.
Though Dyconn Faucet products are certified by various agencies, Dyconn Faucet makes no implication that products comply with any or
all local building or plumbing codes. It is the consumer’s responsibility to determine any code compliances when installing and using
Dyconn Faucet products.
Dyconn Faucet Brand Limited Warranty on Faucets and Kitchen/Bath Accessories
Limitations of Warranty:
The warranty shall not apply and be void for incorrect operating procedures, breakages and/or damages caused by fault through
improper installation, carelessness, abuse, misuse, misapplication, improper maintenance and alteration of product; damages caused by
chemicals, natural corrosion, accident, fire, flood, an act of God, or any casualty. Avoid abrasive cleaners, materials, steel wools and harsh
chemicals as these will scratch, damage, and/or dull the products and/or finish of the products and void the warranty. The proper
installation of product covered is the responsibility of the original owner/purchaser of the product. Dyconn Faucet neither installs nor
supervises the installation nor hires contractors for this purpose; consequently, Dyconn Faucet cannot be held responsible for any
default breakage, or damages caused thereby or resulting thereof, either directly or indirectly.
This warranty does not apply to products that have not been installed or operated in accordance with instructions supplied by Dyconn
Faucet and all applicable rules, regulations, and legislation pertaining to such installations.
This warranty does not apply to commercial or industrial applications of Dyconn Faucet products.
Dyconn Faucet is not responsible or liable for personal injuries or deaths to any person for any direct, special, incidental, or
consequential damage, loss of time, loss of profits, inconvenience, incidental expenses, labor or material charges, or any other cost
resulting from the use of the product or equipment or pertaining to the application of the present warranty, or resulting from the removal
or replacement of any product or element or part covered by this warranty.
In any case, Dyconn Faucet is not liable for any amount over and above the purchase price paid for the product by the
original owner/end-user.
Although this product’s finish is extermely durable, regular maintenance and proper cleaning is required to ensure your product’s
longevity. Harsh cleaners and abrasive cleaning pads may damage this product’s surface. To clean, use gentle, non-abrasive cleaning
solutions and/or polishes.
Cleaning and Care
Manufacturer Limited Warranty