3Insert two AAA batteries (not
included) into the battery
compartment. Make sure that
the + and - symbols on the
batteries match
the + and - symbols in the
battery compartment.
4Snap the battery door back into
place.
To install the light:
• Mount the light on your
camcorder by sliding it into
place on the accessory shoe
and tightening the mounting
screw.
If your camcorder does not
have an accessory shoe, the
Dynex Video Bracket (model
DX-VIDBKT) can provide a
mounting platform.
To use the light:
• Turn the light on by sliding the
power switch to the MED or HI
position. You can then take
pictures or video. To conserve
batteries, turn the light off when
you are finished.
Specifications:
LEDs: 10 ~ 3700K (+/- 500K) color
balanced
Power:
2 AAA Alkaline/ NiMH batteries
Run Time:
60-90 minutes depending
on battery usage and type
Dimmer: Off / Medium / High
Weight: 1.9 oz (with batteries)
Size: 2.35”x 1.75”x 1”
