DYTECH GT06 User manual

GT06 High Precision Vehicle GPS Tracker
Based on 4G/GSM communication technology & GPS
high-precision satellite positioning technology
Manual Rev.: 1.0
Revision Date: Mar.18, 2023

Updated Version Instruction
Edition
Revision Date
Version Described
V1.0
2023/03/18
Document built

Table Of Contents
1.Introduction ......................................................................4
2.SMS Command Description......................................... 10
3. Platform & APP ................................................................14
4.Installation......................................................................15
5.Trouble shooting...........................................................17
6.Appendix（Test Report）............................................17

1. Introduction
1.1 Product Introduction
Product: GT06 4G/GSM high precision vehicle GPS
tracker
Thisproductisbasedon2G/4GnetworkandGPSsatellite,itrealizes
positioning and monitoring of any remote target through SMS,
application and Internet. Adopt the most advanced GPS and AGPS
dual positioning technology. Built-in satellite receiving antenna,
positioning accuracy can reach dynamic less than 10 meters, which
can meet the requirements of vehicle positioning and tracking.
Through technological innovation ，this product has the
characteristics of high accuracy, high sensitivity, low power
consumption, and small size. Its extremely high tracking sensitivity
has greatly expanded the coverage of its positioning.
1.2 GT06 Type And Features
1) GT06 Features
Figure 1 GT06 high precision GPS tracker
and accessories
◆2G/4G Universal;
◆Ultra-wide voltage input range: DC
10V～40V;

◆GPS continuous positioning, GPRS regular
reporting (1 report in 10 seconds by
default);
◆Support SMS and platform to query
location information;
◆Built-in vibration sensor to realize
vehicle intelligent anti-theft;
◆ACC ignition signal detection and
vehicle status display;
◆Remote control vehicle by Relay;
◆SOS switch button can be connected for
emergency call for help;
◆180 MAH lithium battery to realize
illegal thread cutting alarm;
◆Voice monitor;
◆Door alarm.
2) GT06N Features
Figure 2 GT06N high precision GPS tracker and
accessories
◆2G/4G Universal;

◆Ultra-wide voltage input range: DC
10V～40V;
◆GPS continuous positioning, GPRS regular
reporting (1 report in 10 seconds by
default);
◆Support SMS and platform to query
location information;
◆Built-in vibration sensor to realize
vehicle intelligent anti-theft;
◆ACC ignition signal detection and
vehicle status display;
◆Remote control vehicle by Relay;
◆SOS switch button can be connected for
emergency call for help;
◆180 MAH lithium battery to realize
illegal thread cutting alarm;
◆Voice monitor;
◆Door alarm.
1.3 Specifications
Product Features
1. Accuratepositioning, with anaccuracyof10meters
2. More Functions: Door alarm, ACC detection, Low
power alarm, Wire-Cut alarm, Remote oil control, SOS
Alarm, Overspeed alarm, Vibration alarm, Geo-Fence,
ETC.
Application Area
Leased Vehicles, Credit Vehicles, Passenger Vehicles, Taxi,
Freight Vehicles, Car, Motorcycle, Etc.
Device Parameters
Y
e
s
Electrical
Power
Supply
●
Car Battery

Characteristics
Work
Voltage
Range
●
10~40V
Work
Current
●
12V/30mA -
80mA
Sleep
Current
●
12V/5mA -
15mA
Battery
Capacity
●
3.7V/180mAH
lithium Battery
Environmental
Characteristics
Work
Temperatu
re Range
●
-30℃~+80℃
Storage
Temperatu
re Range
●
-40℃~+85℃
Operating
Humidity
Range
●
5%-95%
Communication
Characteristics
Communica
tion Module
Brand
●
Simcom/A7670S
A
Network
System
●
2G/4G
Communica
tion Band
●
LTE FDD:
B1/B2/B3/B4/B
5/B7/B8/B28
/B66
LTE TDD:
B34/B38/B39/
B40/B41 GSM:
850/900/1800/
1900MHZ

SIMCARD
●
BIG SIM CARD
Communica
tion
Antenna
●
Built-in design
Position
Characteristi
cs
Positioning
Type
●
GPS/AGPS/LBS
Cold Start
Time:
●
Cold Start: <30S
(Open Sky)
Warm Start
Time:
●
Warm Start:
<10S (Open Sky)
Hot Start
Time:
●
Hot Start: <2S
(Open Sky)
GPS
Sensitivity
●
-165dBm
Acquisition
Sensitivity
●
-148dBm
Position
Accuracy
●
10M

1.4 Indicator Definition
A
GPS LED Indicator (Blue LED)
Flashing
Searching GPS signal
Continuously bright
GPS fixed
Continuously dark
No GPS fix or initializing
Continuously bright
to dark
Come in sleeping
B
Communication LED Indicator (Green LED)
Flashing
Searching communication
signal
Continuously bright
Communication signal ok
Continuously dark
No communication signal or
initializing
Continuously bright
to dark
Come in sleeping
C
Power Status Indicator (Red LED)
Flashing
No external power
Continuously bright
External power ok
Continuously dark
No battery and no external
power
Continuously bright
to dark
Come in sleeping
1.5 Equipment wiring requirements
The device power supply is DC 10V-40V. The red line is
positive pole while the black line is negative pole.
The negative pole of power supply connects with ground
or the metals. Please do not connect with other ground
lines.
When finishing the power supply wire connection,
please make the plug of power supply to the device.

wire connection method:
Figure 3 wiring diagram
2.SMS Command Description
All the commands are SMS command; no case-sensitive;
space between parameters.
1)APN Setting
SMS
Command
Parameter
Sample
APN
Setting
APN123456
APN
APN123456
APN APNNAME
APNPASSWORD
1: apn123456
internet
2: apn123456
java.claro.com.br
claro claro
Command
Description
1)Please get APN from the sim card
mobile operator in the tracker;
2)It is needed to set APN to make the
tracker send data to server.
Command
Feedback
Successful Setting: set apn ok!

2)Server Setting
SMS
Command
Parameter
Sample
Server
Setting
adminip123456
ip port
adminip123456
domain port
1:
adminip123456
45.112.205.99
7018
2:
adminip123456
www.19gps.net
7018
Command
Description
Server setting is done in factory,
normally after APN setting, the
tracker will be online.
Command
Feedback
Successful Setting: set ip port ok!
3)Heartbeat Packet Upload Time Setting
SMS
Command
Parameter
Sample
Heartbeat
Packet
Upload
Time
Setting
TCP123456
300
TCP123456 300
Command
Description
1) Scope:90~600 seconds;
2) Default 300 Seconds.
Command
Feedback
Successful Setting: TCP ok!
4)Moving Upload Time Setting
SMS
Command
Parameter
Sample
Moving
Upload
Time
Setting
fix123456 30
fix123456 30

Command
Description
1)Default 10 Seconds;
2)30 mean 30seconds.
Command
Feedback
Successful Setting: fix 30S ok!
5)Static Upload Time Setting
SMS
Command
Parameter
Sample
Static
Upload
Time
Setting
sup123456 5
sup123456 5
Command
Description
1)The default: GPS closed, only upload
heartbeat packet to save power;
2)If needed to send this command to
upload GPS data in static;
3)5 mean 5minutes send one time GPS
data in static;
4)SMS command: nosup123456 to
cancel this setting.
Command
Feedback
Successful Setting: 1)sup ok!
2)nosup ok!
6)Sleeping Setting
SMS
Command
Parameter
Sample
Sleeping
Setting
sleepin123456
sleepin123456
Command
Description
1)After sending this command, the
tracker will come in sleeping mode
after 5minutes in static;
2)When Car start, the tracker auto
come in real time tracking.
Command
Feedback
Successful Setting: sleepin ok
7)Inflection Points Supplementary Setting

SMS Command
Parameter
Sample
Inflection
Points
Supplementary
angle123456
20
angle123456 20
Command
Description
1)Default: 22degrees;
2) Scope:18~28 degrees;
3)20 mean: when >20 degrees, the
tracker auto add points GPS data
to upload;
4)SMS command: noangle123456
to cancel inflection points
supplementary upload.
Command
Feedback
Successful Setting: 1)angle ok!
2)noangle ok!
8)Relay Action Command
SMS
Command
Parameter
Sample
Oil Cut
cut123456
cut123456
Resume oil
resume123456
resume123456
Command
Description
1)After oil-cut command, relay action
to cut oil pump power;
2)Relay action need: GPS fixed now
and speed<20km/h;
3)Resume oil pump power supply:
resume123456
Command
Feedback
Successful Setting: 1)Stop engine
Succeed!
2)Resume engine
Succeed!
9)Sound Monitor And Tracking mode
SMS
Command
Parameter
Sample
Sound
Monitor
monitor123456
monitor123456

Tracking
tracker123456
tracker123456
Command
Description
1)Monitor mode: tracker auto answer
calling;
2)Tracker mode: tracker return
Google link message after calling.
Command
Feedback
Successful Setting: 1)monitor ok!
2)tracker ok!
10)SMS Position query
SMS
Command
Parameter
Sample
SMS
Position
query
smslink123456
Smslink123456
Command
Description
1)Tracker mode: tracker return
Google link message after calling;
2)SMS command: smslink123456,
tracker return Google link message;
3)Tracker GPS unfixed, return LBS
data.
Command
Feedback
Successful Setting: Google link with
GPS data or LBS data.
11)SMS Command Password
SMS
Command
Parameter
Sample
Change
SMS
Command
Password
password123456
888888
password123456
888888
Command
Description
1)Default password :123456;
2)After sent this command, the
password will be changed to 888888;
3)The password should be 6bits
numbers;
4)SMS command:begin888888,the
password will be back to 123456;
5)SMS command:superformat123456,

the password will be back to 123456.
Command
Feedback
Successful Setting: password ok!
12)Admin Numbers Setting
SMS
Command
Parameter
Sample
Admin
Numbers
Setting
Admin123456
00861380013800
0
Admin123456
00861380013800
0
Command
Descriptio
n
1)Country code needed;
2)Maximum:5 numbers;
3)Other numbers set or deleted by the
first number.
Command
Feedback
Successful Setting:1) admin ok!
2) admin fail!admin
number full
13)Low Battery Alarm
SMS
Command
Parameter
Sample
Enable
Lower
Battery
Alarm
lowbattery123456
on
lowbattery123456
on
Disable
Lower
Battery
Alarm
lowbattery123456
off
lowbattery123456
off
Command
Description
1)Default: the alarm disabled;
2)Alarm enabled: the tracker will send
alarm message to admin numbers and
alarm data to platform when
battery<3.55V.
Command
Feedback
Successful Setting:1) lowbattery on ok!
2) lowbattery off ok!

14)Wire-Cut Alarm
SMS
Command
Parameter
Sample
Enable
Wire-Cut
Alarm
extpower123456
on
extpower123456
on
Disable
Wire-Cut
Alarm
extpower123456
off
extpower123456
off
Command
Description
1)Default: the alarm disabled;
2)Alarm enabled: the tracker will send
alarm message to admin numbers and
alarm data to platform when external
power cut.
Command
Feedback
Successful Setting:1) extpower on ok!
2) extpower off ok!
15)Overspeed Alarm
SMS
Command
Parameter
Sample
Enable
Overspeed
Alarm
speed123456
80
speed123456 80
Disable
Overspeed
Alarm
nospeed123456
nospeed123456
Command
Description
1)Default: the alarm disabled;
2)80 mean when speed>80km/h, the
tracker will send alarm message to
admin numbers;
3) Suggest value: >30.
Command
Feedback
Successful Setting:1) speed ok!
2) nospeed ok!
16)Shock Alarm
SMS
Command
Parameter
Sample

Enable
Shock
Alarm
shock123456
shock123456
Disable
Shock
Alarm
noshock123456
noshock123456
Command
Description
1)Default: the alarm disabled;
2)Alarm effective time: 5 minutes;
3)When Alarm triggered, the tracker
will send alarm message to admin
numbers and alarm data to platform.
Command
Feedback
Successful Setting:1) shock ok!
2) noshock ok!
17)Time Zone
SMS
Command
Parameter
Sample
Set Device
Time Zone
time
zone123456 8
time
zone123456 -8
30
time zone123456
8
time zone123456
-8 30
Command
Description
1)8 mean 8 time zone;
2)-8 30 mean -8:30 time zone;
Command
Feedback
Successful Setting: time zone ok!
18)Defensive State
SMS
Command
Parameter
Sample
Enable
Arm
arm123456
arm123456
Disable
Arm
disarm123456
disarm123456
Command
Description
1)ACC off needed to come in defensive
status, if ACC on, the tracker will
return message: set up fail! pls turn off
ACC;
2)After the tracker come in defensive

state, all alarms enabled, when door
opened, the tracker will send Door
alarm to admin number and platform.
Command
Feedback
Successful Setting:1) arm ok!
2) disarm ok!
19)Status Check
SMS
Command
Parameter
Sample
Status
Check
check123456
check123456
Command
Description
The tracker will return
communication signal strength, GPRS
status, GPS status, external power
voltage, ACC status, relay status, arm
status, ETC.
Command
Feedback
Status report.
20)Parameters Check
SMS
Command
Parameter
Sample
Parameters
Check
param123456
param123456
Command
Description
The tracker will return software
version, IMEI numbers, APN, Time
zone, admin numbers, ETC.
Command
Feedback
Parameters report.
21)IMEI Check
SMS
Command
Parameter
Sample
IMEI Check
imei123456
imei123456

Command
Description
The tracker will return IMEI numbers,
sim card ICCID.
Command
Feedback
IMEI numbers and sim card ICCID.
22)Mileage Check
SMS
Command
Parameter
Sample
Mileage
Check
mileage123456
mileage123456
Command
Description
The tracker will return total mileage
and current mileage information.
Command
Feedback
Total mileage and current mileage
information.
23)Restart
SMS
Command
Parameter
Sample
Tracker
Restart
reboot123456
reboot123456
Command
Description
The tracker will restart.
Command
Feedback
Successful Setting: after 20s will
reboot ok!
24)IMEI Change
SMS
Command
Parameter
Sample
IMEI
Change
SETIMEI123456
35785704999999
9
SETIMEI123456
35785704999999
9
Command
Descriptio
n
All setting return to factory status.
Command
Feedback
Successful Setting: superformat ok!
25)Factory Reset

SMS
Command
Parameter
Sample
Factory
Reset
superformat12345
6
superformat12345
6
Command
Descriptio
n
All setting return to factory status.
Command
Feedback
Successful Setting: superformat ok!
3.Platform & APP
3.1 Platform:
Website: http://www.19gps.net
Login as IMEI
IMEI is in the label on the tracker, it is 15bits numbers.
Enter IMEI
Password:123456
3.2 APP:
Please search MYGNSS in Google store or Apple store.
Please choose server as 19GPSGroup--> 19GPS
Login as IMEI
IMEI is in the label on the tracker, it is 15bits numbers.
Enter IMEI
Password:123456
In production, IP, port had been set in, normally the tracker
will be auto online after APN setting.
If the tracker offline, please get APN from sim card in the
tracker mobile operator, then set it by SMS command.
If you lost IP, port, please send below SMS command to set
them back：
Adminip123456 www.19gps.net 7018
4.Installation
4.1 Preparation before installation
4.1.1 Please open the packing box to check whether the type
of device is correct and whether the accessories are included.