E-matic ESW454 User manual

User’s Manual
Ematic Smart Watch
ESW454

2
Important Notices
• Due to regular updates, the user manual may not cover
all aspects of new features.
• Do not disconnect the device suddenly when format-
ting or uploading and downloading. Doing so can cause
program errors.
• When using headphones, adjust the volume to a safe
level to avoid hearing damage.
• The device is only water resistant when immersed in
shallow room temperature water. Do not wear the device
when you bathe, swim, or submerge yourself for long
periods of time.
• The new battery will be in its best condition after being
fully charged.
• Do not dismantle the device by yourself.
• Do not use alcohol, thinner or benzene to clean its sur-
face.

3
Overview
3.5mm audio
jack.
Charging port
Hold to power
on/off
Press to
sleep/wake
Back button
Hold to return to
main home panel
Microphone

4
Charging
Fully charge your smart watch for 2 -3 hours before the
rst use.
Use the included USB to headphone jack charger.

5
Turn On
Turn Off
Press and hold the power button until the Ematic logo
appears. Wait a moment while the screen loads.
Google will ask you for your Location consent. Tap Agree
or Disagree.
To turn off your smart watch press and hold the power
button. A pop-up will ask you if you would like to turn off
the watch. Tap the check mark.
If your smart watch crashes, hold the power button until it
is forced to reboot itself.

6
Sync to your device
Download and install the Z Watch Aide App at:
*App is only compatible with Android 4.0 or higher
http://126.am/zwatch
OR scan the QR code below

7
Launch the Z Watch Aide App
Make sure Bluetooth is on for
both your Smart Watch and
your Android device.
To turn on Bluetooth for your
Smart Watch go to your Settings
app, tap Bluetooth, and tap the
small box.
Tap Search ZWatch
When nished searching, tap
Bond, enter the passkey, and
pair with your device.
Ematic Watch

8
Smart Watch will automatically begin syncing to your
phone. If you are unsure if your device has successfully
paired with the Smart Watch, tap Send Notication.
The Smart Watch will vibrate indicating that you are paired.
Tap Sync Settings to modify your sync settings.
Choose which apps to sync, when to receive notications,
or set up a quick sms for rejected calls.
Sync Settings

9
Getting Started
Home Screen
Swipe up or down to choose your clock interface.

10
Widgets
Swipe to the right to view widgets.
Tap the + icon to add more widgets.
Tap and hold a widget, then tap the x to remove it.

11
Apps
Swipe to the left to view your apps.
Tap any app to open it.
Connect your Smart Watch to your computer.
Drag and drop your .apk le. Open the File Browser app
using your Smart Phone. Install the app.
Adding Apps

12
Swipe to the left to view your apps.
Tap any app to open it.
*Only Windows 7 and higher are supported
Connect to your
computer by USB.
Driver will install.
Choose open folder or
select the removable
disk. You can now drag
and drop les just as you
would with a USB drive.
Connecting to your Computer
PC
Ematic Watch (E:)
Ematic Watch (E:)

13
Go to android.com/letransfer. Download and install
the Android File Transfer application for your Mac.
The application will launch automatically when you
connect your SmartWatch by USB. Drag and drop les
to transfer.
Mac®

14
Bluetooth: Manage your Bluetooth settings.
Remind: Choose vibration options for reminders.
Datetime: Set the date, time, and time zone.
Display: Choose Wallpaper, turn backlight on/off.
Sleep Time: Change sleep settings.
Language: Set your language.
Location Services: Allow Google access to your
location data for improved search results.
About: General information, upgrade, factory reset.
Settings

15
Visit ematic.us/support for customer service
regarding your device.
To submit a request, ll out the required information on-
line. You will be provided a ticket number regarding your
issue, which you can refer to when contacting us further.
The Ematic User Manual may contain or reference links to third-party sites, how-
ever, please be aware that Ematic is not responsible for and cannot control these
other sites. Ematic makes no representations or warranties whatsoever about any
other website which you may access as a result of reading this user manual, or
otherwise. When you access a website that is not owned or operated by Ematic
(a “non-Ematic website”), even one that may contain an Ematic logo, please un-
derstand that it is independent from Ematic, and that Ematic has no direct control
over the content on such website(s). In addition, a link to any such non-Ematic
website does not mean Ematic endorses or accepts any responsibility for the con-
Customer Support
Limitations of Liability Statement
Limitations of Liability Statement

16
tent, or of any functionalities or services, of such website(s). Furthermore, Ematic
makes no promise, representation or warranty that any non-Ematic website you
navigate to will be free of viruses, worms, Trojan horses and other items of a
destructive nature. The Ematic User Manual is for your exclusive benet and you
assume all risks, losses and/or damages of whatever nature that may result arising
out of your use of the Ematic User Manual.
To the maximum extent permitted by applicable law, Ematic shall not be liable
for any damages suffered as a result of using, modifying, contributing, copying,
distributing, or downloading the materials, use of the Ematic User Manual or use
of any Ematic product and/or software. In no event shall Ematic be liable for any
indirect, extraordinary, exemplary, punitive, special, incidental, or consequential
damages (including, without limitation, loss of data, revenue, prots, use or other
economic advantage) however arising, whether for breach of contract or in tort,
even if Ematic has been previously advised of the possibility of such damage.
You agree that you have sole responsibility for adequate protection and backup
of data and/or equipment used in connection with the product and software and
will not make a claim of any nature against Ematic for lost data, inaccurate output,
work delays or lost prots resulting from the use of the materials. You agree to in-
demnify, hold harmless and defend Ematic, together with its afliates, parent and
subsidiary entities, successors, assigns, partners, managers, members, employees,
ofcers, directors and shareholders, from and against any and all damages, liens,
liabilities, losses, demands, actions, causes of action, claims, costs and expenses
Limitations of Liability and Indemnity

17
(including, without limitation, reasonable attorneys’ fees, charges and disburse-
ments, as well as the cost of in-house counsel and appeals) arising from or related
to Ematic, the use of The Ematic User Manual or any Ematic product and/or soft-
ware. Some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
Windows™ is a registered trademark of Microsoft Corp. in the United States and
other countries; Mac OS® is a registered trademark of Apple Inc.; Linux™ is a
registered trademark of Linus Torvalds. Android is a trademark of Google Inc.
The Android robot is reproduced or modied from work created and shared by
Google and used according to terms described in the Creative Commons 3.0
Attribution License. ©2012 Google In. All rights reserved. Android, Google, Google
Play, YouTube and other marks are trademarks of Google Inc. Ematic is not afli-
ated with Google Inc. Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are
registered trademarks of the the Wi-Fi Alliance.
Ematic is not afliated with Microsoft, Apple, Inc., Linux, or Google, Inc., (including
Android).
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The Ematic brand and products are owned by Shaghal, Ltd.

18