*Screen Saver Seng
Press the POWER Buon (7) to switch on the CVR, press OK (4) to stop recording,
then press MENU (5) to enter setup menu interface, press MENU (5) again and use
the Arrow Key (2&6) to select Screen Saver, select Off/1 min/ 3 min (CVR screen
will shut down within the selected duraon). Press MENU (5) and OK (4) to return
to the recording mode.
*EV Seng (Exposure Value)
Press the POWER Buon (7) to switch on the CVR, press OK (4) to stop recording,
then press MENU (5) to enter video menu interface, use the Arrow Key (2&6) to
select EV, select your preferred Exposure Value (higher value, brighter image while
lower value, dimmer image). Press MENU (5) and OK (4) to return to the recording
mode.
*Moon Detecon Seng
Press the POWER Buon (7) to switch on the CVR, press OK (4) to stop recording,
then press MENU (5) to enter video menu interface, use the Arrow Key (2&6) to
select Moon Detecon, turn it On or Off. Moon Detecon allowed CVR to
resume recording automacally while there is object moving in front of the
camera. Press MENU (5) and OK (4) to return to the recording mode.
*Audio Seng (Mic Seng)
Press the POWER Buon (7) to switch on the CVR, press OK (4) to stop recording,
then press MENU (5) to enter video menu interface, use the Arrow Key (2&6) to
select Audio, turn it On or Off. Press MENU (5) and OK (4) to return to the
recording mode.
*Date Stamp Seng
Press the POWER Buon (7) to switch on the CVR, press OK (4) to stop recording,
then press MENU (5) to enter video menu interface, use the Arrow Key (2&6) to
select Date Stamp, turn it On or Off. Turn the Date Stamp ON to show the
recording date on the video clip. Press MENU (5) and OK (4) to return to the
recording mode.
*G-Sensor Seng
Press the POWER Buon (7) to switch on the CVR, press OK (4) to stop recording,
then press MENU (5) to enter video menu interface, use the Arrow Key (2&6) to
select G Sensor, select your preferred level Off/Low/Medium/High. The higher
level the higher sensiveness, G-sensor helps to lock the file automacally when
the CVR has been in collision, the file will not be deleted or overwrien during the
loop-recording. Press MENU (5) and OK (4) to return to the recording mode.
*Mute Seng
Press the POWER Buon (7) to switch on the CVR, press MENU (5) to mute the mic.
