EAST COAST Henley User manual

Henley Cot Bed
Instructions
IMPORTANT! RETAIN FOR
FUTURE REFERENCE.
READ CAREFULLY

Page 1
1
2

Sidesx 2
Ends x 2
Base
Long bolts x 4
Hexagon key
Barrel nuts x 4
Short bolts x 8
Page 2

4 Cot assembly
Page 3
Insert barrel nuts into the holes on the inner faces of the base sides. Ensure the slots
in the barrel nuts point towards the holes in the ends. Use a at-bladed screwdriver
to align if necessary.
At the preferred height, attach the base to one end using two long bolts and the
hexagon key.
Repeat for the other end using the two remaining long bolts.
Do not fully tighten the bolts at this stage.
CAUTION: The base
must be assembled
the right way up

Page 4
4
Attach afixed side to both ends using four short bolts. Ensure that the plastic
teething rail is at the top.
Repeat for the second side.
Finally tighten all bolts.

5
Page 5
6
1) Carefully pull the top and bottom halves of the ends apart.
For customer care or enquiries:
Call: 01692 408802
Email: [e-mail]
East Coast Nursery Ltd. Robertson House, North Walsham,
Norfolk, NR28 0BX
eastcoastnursery.co.uk