Chipolino Baby Boss User manual

This product has been manufactured in accordance with
the Product Safety Directive 2001/95/EU of the European Parliament and
The Council and with European standard EN 1130: 2019 „Children’s
furniture. Cribs. Safety requirements and test methods.”, and the regulations
of national law, including Consumer Protection Law.
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!
INSTRUCTION FOR USE OF
CO-SLEEPING CRIB WITH DROP SIDE
„BABY BOSS”

1
FOLLOW ALL WARNINGS, INSTRUCTIONS AND RECCOMENDATIONS IN THIS
MANUAL IN ORDER TO GUARANTEE THE SAFE USE OF THIS PRODUCT
CAUTION! WARNINGS!
• WARNING! DO NOT USE THIS PRODUCT WITHOUT READING THE INSTRUCTIONS FOR
USE FIRST!
• WARNING! NEVER LEAVE THE CHILD UNATTENDED!
• WARNING! STOP USING THE PRODUCT AS SOON AS THE CHILD CAN SIT OR KNEEL OR
PULL ITSELF UP!
• WARNING! DO NOT PLACE ADDITIONAL OBJECT IN COT (SUCH AS TOYS, PILLOWS).
PLACING ADDITIONAL ITEMS (SUCH AS TOYS, PILLOWS, ETC.) IN THE PRODUCT MAY CAUSE
SUFFOCATION!
• WARNING! DO NOT PLACE THE PRODUCT CLOSE TO ANOTHER PRODUCT, WHICH COULD
PRESENT A DANGER OF SUFFOCATION OR STRANGULATION, E.G. STRINGS,
BLIND/CURTAIN CORDS, ETC.!
• WARNING! IN ORDER TO AVOID THE RISK OF CHILD’S NECK ENTRAPMENT IN THE TOP RAIL
OF CRIB’S DROP SIDE, LOCATED NEXT TO ADULT’S BED, THE TOP RAIL SHOULD NOT BE
HIGHER THAN ADULT’S BED MATTRESS!
• WARNING! IN ORDER TO AVOID THE RISK OF CHILD’S ENTANGLEMENT, THE BELTS WHICH
FIX THE PRODUCT NEXT TO THE ADULT’S BED MUST BE KEPT OUT OF REACH AND OUT OF
THE PRODUCT.
• WARNING! IN ORDER TO AVOID THE RISK OF CHILD FALLING OUT OF THE PRODUCT,
IT SHOULD BE USED ONLY IF IT IS WELL FIXED TO ADULT’S BED OR IF THE DROP SIDE IS
FIXED IN ITS HIGER POSITION.
• WARNING! DO NOT USE MORE THAN ONE MATTRESS IN THE PRODUCT.
• If you use a mattress, which is not provided by the manufacturer, make sure it has the appropriate
thickness and is suitable for the product. The internal height between top edge of the mattress and the
top edge of side rail should be at least 200 mm (SEE THE MARKING ON INSIDE OF THE CRIB).
• DANGER! ALWAYS KEEP THE DROP SIDE FIXED IN ITS HIGHER POSITIN WHEN PRODUCT IS
NOT FIXED NEXT TO ADULT’S BED!
• ATTENTION! THIS PRODUCT IS SUITABLE TO BE ATTACHED TO ADULT BEDS WHICH HAVE
DISTANCE BETWEEN THE FLOOR AND THE TOP EDGE OF THE MATTRESS 43 - 61 CM.
• Theproductshouldbeplacedonlyonahorizontaloor!Unevensurfacesmaycausetheproductto
be unstable!
• Young children should not be allowed to play unsupervised in the vicinity of the product!
• Beforeeachusemakesurethatallxingsarelocked.
• DO NOT use crib if any parts are missing, damaged, or broken. Contact manufacturer or an
authorized dealer for replacement parts and instructional literature if needed.
• DO NOT substitute parts! The manufacturer shall not be responsible for the safety of the product in
case substitute parts were used which were not approved and/or provided by the manufacturer!
• All assembly ttings should always be tightened properly and that care should be taken that no
screws are loose, because a child could trap parts of the body or clothing (e.g. strings, necklaces,
ribbons for babies’ dummies, etc.), which would pose a risk of strangulation.
• Beawareoftheriskofburningcigarettes,openresandothersourcesofstrongheat,suchaselectric
 barres,gasres,etc.inthenearvicinityoftheproduct.
• DO NOT use the body of the product without its frame.
• The product shall NEVER be used in an inclined position.
• When using the function “Co-sleep mode (xed to adult’s bed)” in order to prevent the risk of
 su󰀨ocationhazardduetoentrapment,theproductshallbesecurelyxedtotheadult’sbedusingthe
attachment system.
• Use only the belts for xing the crib next to adult’s bed which are provided with this product!
DO NOTuseanyotherbeltsorsystemforxing!

2
MAIN FEATURES
• The product is intended for children aged 0 to 6 months weighing no more than 9 kg;
• “Co-sleepmode(xingtotheadult’sbed)”,thatallowstheparenttosafelysleepclosetothechild;
• Heightadjustableandanti-reuxoption;
• Rocking function;
• Easy and compact folding for better storage.
Please, make sure that all parts are available:
Frame with upholstery – 1 pc
Side supports – 2 pcs
Mosquito net – 1 pc
Mattress – 1 pc
Screws – 4 pcs
Screwdriver – 1 pc
Storage basket – 1 pc
Attachment straps
• The crib must be tight against the adult’s bed and no gap is allowed between crib and the adult’s bed
mattress. DO NOTusetheproductifyoundthereisagap!Do notllthegapwithpillows,blankets
or other objects.
• Checkifthecribissecurelyxedtoadult’sbedbytryingtopullitawayfromthebed.
• The product must NOT be used for more than one child at a time!
• Assembly, folding and unfolding of the product to be done by adults ONLY!
• DO NOT allow children younger than 3 years old near the product during the assembly or
disassembly in order to prevent the risk of injury or swallowing of small parts!
• Theplasticbagsmustbekeptawayfromchildrentoavoidtheriskofsu󰀨ocation!
MAIN PARTS

3
CAUTION!Followexactlytheinstructionsgivenandcheckthepictures.
CAUTION! AFTER EACH OPERATION, MAKE SURE THAT EACH FIXING IS SECURE!
CAUTION! In most cases after the completion of an operation you will hear a clicking sound.
CAUTION!Keepawayyourngersfrompinchingduringassembly!
No tools are required to complete the assembly of this product.
The assembly and functions are numbered from 1 to 9.
Use the operations descriptions given in this manual and their matching picture.
INTSTRUCTIONS FOR ASSEMBLY AND FUNCTIONS
ASSEMBLY
1 – UNFOLDING THE FRAME WITH UPHOLSTERY
1-1 – Place the frame as shown in the picture.
1-2 – Lift the tube (1) and insert it in the plastic base (2), until you hear a „click“ sound.
1-3–Liftandxtheothertubeaswell.
1-4–Liftthebaseofthecot,insertandxthescrewintheplate,asshowninthepicture.
1-5–Fixthescrewontheothersideaswell.
1-6 – Flip the cot.
2 – UNFOLDING THE SIDE SUPPORTS
Unfold the side supports, as shown in the picture, until you hear a „click“ sound.
3 – INSTALLING THE STORAGE BASKET
3-1 – Install the storage basket to the side supports by sliding each of the four basket ends to the cor-
responding plate on the side supports.
3-2–Fixitusingthescrewdriver.
4 – INSTALLING THE COT ON THE FRAME
4-1 – Position the cot on the frame.
4-2 – Press the buttons on two sides and insert the cot tubes in the plastic openings on the frame.
5 – DROP SIDE
5-1–Usingthefunction„FIXINGTOTHEADULT’SBED”:
Unzip the two zippers on the drop side. Press the buttons (A), lift the top rail (A) and push it down (C).
Fixitusingthebucklesonthebottomofthecot(B).
5-2–Usingtheproductasababycrib:
Liftthedropside,xthetoprailtotheframe(D)andclosethezippersontwosides(E).

4
6 – „FIXING TO THE ADULT’S BED”
6-1 – Clip strap buckle to both side and bottom of the crib as shown in the picture.
6-2 – Pull the free end of the strap around the parent’s bed frame (not mattress), then close second
buckle on the strap, and tighten the loop of the strap.
ATTENTION! The straps must pass around parent’s bed, NOT around the MATTRESS!
6-3 – ATTENTION! Tighten the straps tightly against the adult’s bed side!
7 – ROCKING FUNCTION
Pressthebuttonandtwistthelowertubeuntilyouheara„click“soundandthetubeisxed.Nowyou
can use the rocking function.
ATTENTION!DONOTUSETHEROCKINGFUNCTIONWHЕНTHECRIBISATTACHED TOTHE
PARENT’S BED.
8 – HEIGHT ADJUSTMENT
The cot may be adjusted in 7 height positions.
Press the buttons on two sides of the crib and move it to the desired position.
IMPORTANT! THE COT MATTRESS LEVEL MAY BE ADJUSTED IN MAXIMUM TWO DIFFERENT
HEIGHT LEVELS BETWEEN THE TWO SIDES.
IMPORTANT! THE BABY’S HEAD MUST ALWAYS BE IN THE HIGHER POSITION.
9 – FOLDING THE CRIB
9-1 – Press button 1 and lift the cot. Then press button 2 and again lift the cot.
Repeat the same actions on other side of the cot and remove it from the frame.
9-2 – Turn the cot upside down and release the screws, as shown in the picture.
9-3 – Press the tube button (1), lift the tube up (2), then release it (3).
9-4 – Press he buttons on both sides of the side supports and fold it.
10 – MOSQUITO NET
10-1 – Place the mosquito net over the cot
10-2and10-3Fixthemosquitonetwithsnapbuttonstotheupholsteryofthecot.
FUNCTIONS
1-1 1-2
12
“click”

5
plate
screw
“click”
1-3
1-5
3-1
2
1-6
1-4

6
“click”
A
B
C
button
screw
button
3-2
4-1
5-1
4-2

7
MATTRESS MATTRESS
OK NO
max 2 cm
zipper zipper
strap strap
strap
strap
strap
“click”
D
E
5-2
6-1
6-2 6-3

8
button
button
button 2
button 1
1-press the
button
2 3
9-1
9-2
8
7
9-3

9
press the
button
1-press
“click”
zipper
9-4
10-1 10-2
10-3

10
CARE AND MAINTENANCE GUIDELINES
• Do not apply strong pressure on the mechanisms for adjusting and folding, as this may damage or
brake them.
• Clean the plastic and metal parts with wet soft cotton cloth or sponge and mild detergent.
• The fabric parts may be hand washed 300С.Followtheinstructionfromthewashinglabel.
• Do not tumble dry or use drying machine!
• Do not use aggressive detergents containing abrasive particles, ammonia, bleach or alcohol.
• Always air dry the crib and mattress before storing them to avoid the forming of mold.
• Storetheproductinacleananddryplace.Donotexposeittodirectenvironmentinuence-sunlight,
rain, moisture or drastic temperature changes!
• Do not place objects or other products on top of the products as this may damage its construction or
upholstery.
• In case of any problems connected with the normal use of the crib, consult the manufacturer or
authorized dealer.
Materials used:plastic,textile,metal.
KOSBB022xxxx

1 Goliamokonarsko shosse, Plovdiv, BULGARIA
www.chipolino.com