EazzyDV IB-185W User manual

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 2 / 36 www.eazzydv.com
Table of Contents
1. Summary
1.1Overview …………………………………………………………………………....P4
1.2Key Functions ……………………………………………………………………..…..P4
1.3Specifications………………………………………………………..……....................P5
1.4Package content……………………………………………………………..……..…..P7
1.5Attention…………………………………………………………………...…...……...P7
2. Product layout..………………………………………...…………………….....................P8
3. Installation…. ………..……………………………………..………………....................P12
4. Client Software Installation ………………………………………………………......P13
5. Operation mode ………...…………………………………………………….………….P16
6. Online watch ..………………………………………………………………...................P21
7. Download recorded video ………………..……………………………………………..P22
8. Set Motion Detection, Email Alerts ……………………………………………………P23
8.1 Push Message Setting ……………………………………………………………….P23
9. Listening and Speaking ….……………………………………………………………P26
10. Video Recording Methods …………………………….………………………………P27
11. Reset Camera ………………………………………………………………………….P27
12. Light Control ………………………………………………………………………….P28
13. Indication Light Meaning ……………………………………………………………..P29

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 3 / 36 www.eazzydv.com
14. Ports Forwarding……………………………………………………………………….P29
15. Advanced Setting for Professional …………………………………………………….P29
16.Advanced Setting for Professional –update patch …………………………………….P30
17.Accessory…………………………………………………………………………………P32
18.Trouble Shooting ………………………………………………………………………..P34
19.Disclaimer ……………...……………………………………………………………….P36

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 4 / 36 www.eazzydv.com
1. Summary
1.1 Overview
It is a WiFi enabled IP Network CCTV Security Digital Video Recorder (DVR) camera, also can be
used a real lamp. This is an innovative design and is being patented. The idea is very simple to use
and can be used worldwide. Just insert a Micro-SD card, screw-in like a bulb, turn on the power, and
it will be automatically recording by itself. When using this device, no drilling holes and no cabling
is required, just using the existing bulb holder is enough. There is no need for any technical
background, if you know how to replace a normal bulb, then you will know how to install this
device.
Besides, you can use your mobile phones or computers to remotely access it via internet, enabling
you to see, hear and speak what is happening. It can be broadly used in any environment and can be
setup by yourself, no matter if it is at home, office, factory, shopping mall, restaurant and so on.
1.2 Key Functions
Function
Description
Provide true HD 960P resolution 1280x960/1280x720
pixels.
WiFi mode acts like a mobile device like your mobile
phone joining an existing wifi router and then able to be
accessed it at outside world via internet.
Using H.264 compression, delivers high quality video and
a superb compression ratio.
Onvif compatible that means video can be saved to
ONVIF supported NVR machines for backup large
volume video files
Using Peer-to-Peer technology, no need setting on routers
and no need DDNS and no need IP address setting, just
plug and play.
Local storage using Micro-SD card, accepting 2GB-32GB,
32GB card can store 12 days video files, recommend using
CLASS 10 card.
When there is motion detected, it will trigger alarms by
email alert or push warning message to mobile phone.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 5 / 36 www.eazzydv.com
When there is motion detected, email alert can send 3
pictures to your dedicated email account
Two ways communication, able to hear sound from bulb
camera on mobile phones and PCs, and able to speak out
through speaker
Camera body is Extendable, rotatable and adjustable
Built-in IR-cut, no color casting
1.3 Specifications
System
Embedded Linux OS
Using industrial grade TI solution CPU, TIDM365
Image Sensor
1/3" CMOS progressive sensor,1.3M pixels
Video
H.264 Compression Format
Resolution : 960P (1280*960)720P (1280*720) / VGA (640*480) /
QVGA(320*240)
Frame Rate : 0 –25 FPS
Data Rate : 32Kbps –2.0M Kbps
Light intensity, contrast ratio, saturation level are adjustable
Network
Using Peer to Peer (P2P) technology, no need configuration and no
DDNS
Support two modes, AP mode and WiFi mode :
AP mode –For local usage, no need internet remote access and no
need to connect to wifi router
WiFi mode –Connect to wifi router and to be accessed via internet
Wi-Fi compliant with wireless standards IEEE 802.11b/g/n
Support both WEP & WPA WPA2 encryption for wireless
Wireless transmission distance in open area around 100 meters
APP / Software
On line viewing and control via iPhones、iPad、Android Smart
Phones、Wins PC、Notepads、Notebooks、

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 6 / 36 www.eazzydv.com
Free client software for mobile phones and computers
One software can display max. 64 bulbs on PC
4 bulbs on Android/iPad/Notepads
1 bulb on iPhone
Simple installation, just download and launch it. No configuration
and no setup at all.
Camera Body
Rotatable camera body (360 degree)
Adjustable len viewing point (90 degree)
Extendable camera length (from length 165mm to 185mm)
Storage
Local storage, support Micro-SD card, 2GB-32GB (class10 card
recommended)
32GB card can store 12days video by using VGA(640*480) format
Support looping and motion detection recording
Recorded files can be remotely downloaded to computer or mobile
phone for viewing
Support client side recording, on PC or mobile phones
ONVIF
Compatible to ONVIF supported NVRs, video can be centrally
stored on NVR machines
Alarm
Motion detection triggering email alert
Motion detection triggering mobile phone push alert
LEN
2.8mm, 120 degree viewing angle, 3.0M pixels
Min.
Illumination
0.5 Lux
IR-CUT
Auto IR-Cut basing on light sensor
Audio
ADPCM Format
Built-in microphone and speaker
Through Client software able to hear sound and able to speak
Cover
Crystal / Mirror for selection
LED
25pcs of 0.2W White /Yellow LED /
2pcs of 3W White LED
IR LED
4pcs of IR LEDs, night vision distance about 5-10 meters /
2pcs of IR LEDs, night vision distance about 15-20 meters
Motion
Detection
Motion detection distance 5 meters
Adapters
E27/E26/B22 optional
Voltage
Worldwide usage, AC 100-240V
Backup battery
Must have 5V 2A output port

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 7 / 36 www.eazzydv.com
type
Power
Consumption
< 5W
Operation
Temp.
-20~ 60℃
Weight
Gross: 379g with box / Camera only : 120g
Dimension
Normal 72 x 165mm / Extend 72 x 185mm
Box size
200*105*85 mm (L*W*H)
1.4 Package Content
1 x iSmart WiFi IP Network DVR Camera (not include memory card)
1 x Instruction Note
1 x Quick setup manual
1 x Remote Control
1 x Battery connection cable (optional, only for battery backup option selected)
1.5 Attention
1. Before replacing the camera, please ensure the power is OFF and the circuit
voltage is within the operation range (100 –250V AC)
2. Please hold the plastic enclosure of the camera during installation or removal
to ensure safety
3. If a camera has been running for more than 2hrs with IR light On, the plastic case will be little bit
warm, which is normal, and the metal part will be warm too. But when IR light off, it will cool
down quickly.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 8 / 36 www.eazzydv.com
2. Product Layout

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 9 / 36 www.eazzydv.com
Buttons
Button
Function
Picture
Micro-SD card slot
/TF card slot
Micro-SD card, accepting 2GB-32GB,
recommend CLASS 10 card.
Reset
Press “R”button and hold for 5
seconds, hearing a sound from
speaker, then release hand. The device
will be restored to factory out settings
(factory mode)
Another way to reset is pressing reset
button on remote, same as press reset
button.
Adjustment of Camera body
Adjustment Section
Action
Picture
Extend Length
Pull to extend or shorten the length.
Turn right to lock it after
extend/shorten the length
Turn left to unlock it then it is able to
extend or shorten the length

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 10 / 36 www.eazzydv.com
Rotation 360 degree
Turning left or right of camera body to
make camera in right position.
Adjust camera
viewing point
Holding head section of camera body,
turning it to achieve right viewing
angles.
Indication Lights Meaning
Light Color
Meaning
Picture
Blue
Camera is booting, not ready to use
Red
Camera is ready to use

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 11 / 36 www.eazzydv.com
Blue Flashing
Blue light will keep flashing. Two area
would occur this situation.
1. If entered wrong password of wifi
router when switching from factory
mode to wifi mode
2. If wifi router is down
Connection with Backup Battery
Backup battery feature is an optional item. There is basic requirements to backup battery. That is must
have 5V 2.0A or above output port. Connection between backup battery and camera is using
provided battery connection cable in the packing. Once power failure of bulb camera, the battery will
auto provide power to camera to keep running. Once power up, camera will use power from socket, not
using power from battery anymore.
If backup battery's output port can not reach 5V 2A or above, the camera will repeat rebooting
itself.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 12 / 36 www.eazzydv.com
3. How to install
1. Insert a Micro SD card (2GB-32GB, format it for first time usage) into the camera card-slot
1.1. Before screwing-in the camera, ensure the socket power is off and the voltage is
within the operation range (AC 100 –250V)
2. Screw-in the camera into a bulb holder just like a bulb
3. Turn on power

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 13 / 36 www.eazzydv.com
4. Client Software Installation
Client APP for mobile phones are available on Apple Store and Google Play for
download, the APP name is called “BulbCam”or you can follow below
procedures to download from our website (www.bulbcam.net)
4.1 Android Smart Phones
Scan to install
Or download at http://www.bulbcam.net/download/bulbcam.apk
Software name : BulbCam

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 14 / 36 www.eazzydv.com
4.2 iPhone /iPad
Scan to install
Or search “BulbCam”in APP Store and install it
Software name : BulbCam
4.3 Win PC
Download it from http://www.bulbcam.net/download/bulbcam.zip
Unzip the file
Click “bulb cam.exe”to install it
Software name : BulbCam

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 15 / 36 www.eazzydv.com
4.4 MAC
Software name : BulbCam
Download it from http://www.bulbcam.net/download/bulbcam.dmg
Install it

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 16 / 36 www.eazzydv.com
5. Operation Mode
This device supports two operation modes.
Mode Name
Function
Factory Mode
When bulb cameras come out from factory that is in this
mode. To make it work, it has to connect to a wifi router.
In any stage, pressing RESET button will revert back to
this mode.
WiFi Mode
Connection to an existing WiFi router., then bulb
cameras are able to be accessed via internet or local
network. Each bulb has a device ID that is used to
identify its identity in internet world.
Remarks:
Below diagram shows how bulb camera is connected with wifi router under a network

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 17 / 36 www.eazzydv.com
5.1 Switching from Factory Mode to Wifi Mode by mobile phone
When bulb cameras come out from factory, each camera has a unique ID (eg. LH00xxxx). This is
known as a device ID and acts as its identity when it is connected to internet world.
Below is the procedure switching from Factory mode to Wifi mode by using a mobile phone.
picture from iPhone
Search Bulb camera's ID under
mobile phone's WiFi section
ID : LH0000xxx
Pwd. : 88888888
(stuck at the back of package box)
Select the ID, and key in
Password (88888888)
If unable to find the ID, reset
the bulb camera by reset button
on camera or by press reset
button on remote
Open APP "BulbCam" in
mobile phone
Tap “Local”or “LAN”,
Tap ">" of a Device ID

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 18 / 36 www.eazzydv.com
Pictures from Android Phone
After bulb camera joining an existing WiFi router, devices (like Andriod smartphone/ iphone/ ipad/
PC/MAC/Notepad.. ) are able to access it over WAN/LAN network. If the WiFi router is connected to
internet, then the bulb camera can be accessed worldwide.
Remark : Bulb camera’s device ID (like LH00xxxx) is its identity and it is for WAN connection. This ID
is used as a login account no.
Select “WiFi”function
Select WiFi Router SSID by
pressing “SEARCH”button and
then press GREY triangle part to
select. After that key in Router’s
WiFi password. Bulb camera will
reboot automatically
Bulb camera will be connected to
current router after 2 minute later
Press RESET button (if wrong
SSID or PWD entered, or not
found after 2 mins ), repeat
setup procedure again

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 19 / 36 www.eazzydv.com
5.2.1 WiFi Mode Trouble Shooting Strategy
If you cannot connect bulb camera to a WiFi router even when password and everything else is correct.
The problem may be caused from the WiFi router setting. Please read below instructions, There are some
key points you must be aware of:
1. Router’s DHCP service must be enabled. Bulb camera depends on it to get IP
address.
2. Router’s SSID must have no spaces in between, that means formats like “my ssid”
is not acceptable; only “myssid”acceptable
3. For the Router’s wireless channel, we would suggest using no. “13”(some old
router without channel 13, then select channel 11)
4. For the Router’s security method, we would suggest using “WPA2-PSK”(AUTO is
not recommended, WEP is not working)
5. For the Router’s encryption method, we would suggest using “AES”(AUTO is not
recommended)
5.3 Switching from Factory Mode to Wifi Mode by PC/Notebook
If your mobile phone is not available, you can also use pc software to change WiFi setting. The steps are :
5.3.1 Use PC/Notebook wifi, connect to bulb camera. Each bulb camera has unique device ID
5.3.2 Input password "88888888"
5.3.3 Run PC software "bulbcam.exe"
5.3.4 Under LAN section, a bulb camera ID shown
5.3.5 Right click mouse button, select "Device settings"

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 20 / 36 www.eazzydv.com
5.3.6 Select "Wireless Setting"
5.3.7 Press “Scan”button at right hand side of screen, then select the router SSID from list box
5.3.8 Select Wireless security type “WPA2-PSK”[Do not choose WEP, also Router do not use WEP as
security type].
5.3.9 Select Data Encryption “AES”.
5.3.10 Manually typing Router’s WiFi password. After that press “Apply”button, bulb camera will
reboot.
5.3.11 Switch PC/Notebook to same network as bulb camera. Under bulbcam software, bulb camera will
be listed there under LAN section.