Echanfit CTM5001N User manual

ECHANFIT
User Manual
Treadmill

- 1 -
CONTENTS
Safety Precautions--------------------------------------------------------------------------------------------02
Assembly Instructions-----------------------------------------------------------------------------------03~06
Folding Instruction--------------------------------------------------------------------------------------------07
Technical Parameter-----------------------------------------------------------------------------------------08
Grounding Methods------------------------------------------------------------------------------------------08
Operation--------------------------------------------------------------------------------------------------09~12
Exercise Instructions------------------------------------------------------------------------------------13~14
Warm up Instruction------------------------------------------------------------------------------------------15
Running Belt Adjustment------------------------------------------------------------------------------------16
Center the Running Belt-------------------------------------------------------------------------------------17
Exploded View-------------------------------------------------------------------------------------------------18
Part List----------------------------------------------------------------------------------------------------------19
Trouble Shooting Guide-------------------------------------------------------------------------------------20

- 2 -
Thank you for purchasing the ECHANFIT CTM5001N Treadmill. Please read this user
manual carefully and keep it for future reference. If you need any assistance, please
contact our support team with your product model number and Amazon order number.
Package Contents
⚫Treadmill CTM5001N
⚫User Manual
⚫Toolkits
Product Diagram

- 3 -
SAFETY PRECAUTIONS
Warning: We suggest that you should consult with your physician or health professional before starting
your workout, especially for the age up to 35 old or health problem related people. We take no
responsible for any troubles or hurts if you don’t follow our specification. Treadmill should be carefully
assembled and covered the motor shield, then connect to the power.
Attention：
1. Ensuring the safety clamps were attached to the clothing or belts before using the treadmill.
2. Please do not insert any items to any part of the treadmill, which would damage the equipment.
3. Position the treadmill on a clear level surface. Do not place the treadmill on thick carpet as it may
interfere with proper ventilation. Do not place the treadmill near water or outdoors.
4. Never start the treadmill while you are standing on the walking belt. After turning the power on and
adjusting the speed control, there may be a pause before the walking belt begins to move, always stand
on the foot rails on the sides of the frame until the belt is moving.
5. Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting clothing
that may be caught in the treadmill. Always wear running or aerobic shoes with rubber soles.
6. Keep the children and pets away from the treadmill while starting workout.
7. Don’t exercise in 40-Mints after dinner.
8. The treadmill is suitable for adults. Juveniles need be accompanied by adults while workout.
9. You must hold on to the handrails until you become comfortable and familiar with the treadmill when
first start the workout.
10. The treadmill is an indoor-using equipment, not outdoor-using for avoiding damage. Keep the
store-place clean and flat, drying. Prohibiting other purpose of using, only for the workout.
11. Please purchase the power-line to the distributor or contact with us directly, for the power-line only
equip to the treadmill.
12. If the treadmill suddenly increases in speed due to an electronics failure or the speed being
inadvertently increased, the treadmill will come to a sudden stop when the pull pin is disengaged from
the console.
13. Do not connect the line to the middle of the cable; do not lengthen cable or change the cable plug; do
not put any heavy thing on cable or put the cable near the heat source; forbid using a socket with several
holes, these may cause fire or people may be hurt by the power.
14. Cut off the power when the treadmill is not used. When the power is cut off, do not pull the power line
to keep the wire in good condition. Insert the plug to the socket with the safety ground circuit, for the
power-line is professional equipment. You must contact with the professional people directly while the
line is damaged.
15. This treadmill only for home-using.
16. Safety area behind the treadmill: 1000*2000MM.

- 4 -
ASSEMBLY INSTRUCTIONS
When you open the carton, and you will find the below parts in the carton.
PART LIST：
NO
DES.
Specification
Nos.
NO
DES.
Specification
Nos.
1
Main frame
1
64
Lock washer
8
6
12
5# Allen wrench
1
8
Oil bottle
1
70
Bolt
M8*42
2
49
Safety key
1
51
Bolt
M8*16
4
21
Left back end cap
1
61
Wrench with
screw driver
1
60
Bolt
4.2*19
4
66
Bottle cage
1
22
Right back end cap
1
59
Bolt
4.2*19
2
58
Lock nut
M8
2
4
6# Allen wrench
6#
1
54
Bolt
M8*45
2
16
Adjustable
foot pad
2
TOOLKITS:
5# Allen Wrench 5mm 1PC
6# Allen Wrench 6mm 1PC
Wrench with screw driver 1PC

- 5 -
Notice: Do not get through power before complete assembly.
STEP 1 ：
STEP 2 ：
STEP 3
1. Open the carton, take out
the above spare parts, put the
main frame on the level
ground.
1. Hold on the computer frame
and fix the computer frame onto
the right and left upright with 5#
allen wrench (12), bolt (51) and
lock washer（64).
Please see the reference as left
picture.
1. Push up the computer and
L&R uprights.
2. Use the 5# allen wrench (12),
drill through the bolt (70) and lock
washer (64), then lock the right
upright onto base frame.
3. Use 6# allen wrench (4), drill
through Bolt (51) to lock washer
(64) then lock the right upright
tubes into the base frame. Please
see the reference as left picture.
4. The left side is same as the
right side.

- 6 -
STEP 4:
STEP 5:
1. Fold up the main frame
firstly.
2. Use the bolt (54) and lock
nut (58) to lock adjustable foot
pad (16) onto main frame.
(Please see the reference as
left picture).
3. Use wrench with screw
driver (61) and 5# allen wrench
(12) to lock the bolt tightly.
4. The right side is same as the
left side.
Notice: Do not to lock the
bolt too tight!!!
1. Put the left back end cap
(21) to the main frame, then
use wrench with screw driver
(61) and bolt (60) to lock the
left back end cap onto the main
frame.
2. The right side is same as the
left side.

- 7 -
STEP 6:
STEP 7:
1. Put the safety key (49)
on the computer.
2. Insert the wire rope
assemblies (15) to the main
frame.
1. Use the wrench with screw
driver (61) and bolt (59) to lock
the bottle cage (66) onto the
right upright.

- 8 -
FOLDING INSTRUCTION
Pulling up:
Pulling down:
Support place A with hand,
kick the place of air pressure
bar, then the base frame will
fall down automatically.
(Please keep anybody and
any pet away the machine
when falling down).
Pull up the base frame at
position (A) till hearing the
sound that the air pressure bar
(B) is locked into the round
tube.
Notice ： Please unplugged
the wire rope assemblies
when folding.

- 9 -
TECHNICAL PARAMETER
GROUNDING METHODS
This treadmill must be grounded. If it malfunctions or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This treadmill is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER –Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the
product is properly grounded. Do not modify the plug provided with the treadmill –if it will not fit the
outlet, have a proper outlet installed by a qualified electrician. This treadmill is for use on a nominal
100~120 volt circuit and has a grounding plug that looks like the plug illustrated in sketch A in following
figure. Make that the treadmill is connected to an outlet having the same configuration as the plug. No
adapter should be used with this treadmill. (The below picture is just for reference; the actual plug and
jack is depending on import country).
BUILT UP
SIZE(mm)
1369*680*1193
POWER
As the rating label showing
FOLDABLE
SIZE(mm)
678*680*1218
MAXIMUN
OUTPUT
POWER
As the rating label showing
RUNNING
SURFACE
SIZE(mm)
420*1080
SPEED RANGE
0.5-8.5MPH
NET WEIGHT
87.5LB
MAX
AFFORDABLE
WEIGHT
220LB
1 LCD WINDOW
Speed, Time, Distance, Calories, Fat

- 10 -
OPERATION
1. DISPLAY WINDOW：
2. LCD WINDOW DISPLAY DETAILS
PROG: Show programs, “---”is displayed in manual mode.
TIME: Show running time.
SPEED: Show speed. During the start-up process, a 3 second countdown is displayed: 3, 2, 1.
PULSE: Show heart beat data. 1.When there is a heartbeat, the heartbeat value is displayed; when
there is no heartbeat, the character 'P' is displayed.
CAL/DIST: Show calories/distance. When the CAL character is lit, the corresponding window displays
the calories; when the DIST character is lit, the corresponding window displays the distance. Heat and
mileage are displayed alternately every 5 seconds.
3. BUTTON FUNCTION
3.1. PROG button: Press this button to choose program from manual mode—P1----P15---FAT.
3.2. MODE button
3.2.1. When machine in standby state, press this button to choose the mode: manual mode, time count
down mode, distance count down mode, calories count down mode.
3.2.2. When machine is in FAT mode, the choose sequence is “Sex”“Age”“Height”“Weight”.
3.3. START button: Press this button to start the machine, the machine will run at the lowest speed or at
the speed of default program after 3 seconds time count down.
3.4. PAUSE/STOP button: When the treadmill is running, press this button once to slow down treadmill
and stop into PAUSE state. All data will remain. In this PAUSE state, if you press this button twice, the

- 11 -
machine will stop completely and all the data will reset. But in this PAUSE state, if you press START
button, the treadmill will start running and continue the data of PAUSE state.
3.5. SPEED +/- : Adjust the speed. Press the button to adjust the speed when running, or adjust the data
when stop.
3.6. SPEED（1,3,5,7)：Adjust the speed quickly.
3.7. Left handrail button: Start/Stop adjustment button.
Right handrail button: Speed adjustment button.
Notice: When any button is pressed, it will be accompanied by a prompt tone. When the
button is adjusted for parameter overrun, it will be accompanied by a long tone prompt.
There is no beep when the button is pressed Invalid.
4. MAIN FUNCTION
Open the power switch, the screen window will light up, the machine will enter into standby state.
4.1. START-UP QUICKLY (MANUAL):
Put safety key, press ‘START’ button, the treadmill will run at the lowest speed in 3 seconds, press
SPEED +/- to adjust the speed. Press the ‘STOP’ button or take out the safety key directly to stop the
treadmill.
4.2. COUNT DOWN MODE:
Press the ‘MODE’ button, you can choose time countdown mode, distance count down mode, calories
countdown mode, and the screen window will show the default data and glitter. At the same time, press
SPEED +/- to set the data. Press ‘START’ button, the machine will run at the lowest speed, you can
press SPEED +/-to change the speed. When it counts down to 0, the machine will stop smoothly.
Certainly, you can press ‘STOP’ button or take out the safety key from the computer to stop the machine.
4.3. INNER INSTALL PROGRAM:
Press ‘PROG’ button to choose the inner install program from P1----P15. When set the program, the time
window will show default data and glitter, press ‘SPEED’button to set the running time. Each program
has been divided into 20 section, Each exercise time=the setting time/20. Press ‘START’, the machine
will run at the first section speed. When the section is over, it will enter into next section automatically,
the speed will change as next section data. When finish one program, the machine will stop smoothly.
During the running, you can change the speed by the SPEED +/-. When the program enter next section
will come back to the current speed. And you can press ‘STOP’ or take out the safety key to stop the
machine whenever.

- 12 -
At the end of the program mode the treadmill will flash with 15 beeps, after which all data
will be cleared to 0 and come into standby status.
5. HEART BEAT TEST
When holding the hand pulse by two hands, the pulse window will show your heart beat after 5 seconds.
In order to get an accurate heartbeat value, please holding the hand pulse more than 30 seconds to test
when the machine stop. The heart beat data is just for reference, cannot be as the medical data.
6. BODY FAT TEST
When the treadmill standby, press ‘PROG’ button till ‘FAT’ shows in the speed window. ‘FAT’ is body fat
test mode. Press ‘MODE’ to choose parameter ‘SEX / AGE / HEIGHT / WEIGHT’, and TIME/DIST
window will show “-1-”，“-2-”、“-3-”“-4-". When set each parameter, press SPEED +/- to adjust the data,
and CAL/PULSE window will show the data and press ‘MODE’ button to finish, the window will show
“-5-” and “---” enter into ready to go condition. Hold the handle pulse with two hands, it will show your
BMI data after 5 seconds.
6.1. Data display and set range
6.2. BMI reference
Parameter Type
Default
Setting Range
Mark
SEX（-1-）
0（MALE）
0—1
0= MALE 1= FEMALE
AGE（-2-）
25
10—99
HEIGHT（-3-）
67 in
40—95 in
WEIGHT（-4-）
154LBS
44—352LBS
（BMI）
Meaning
<19
Under weight
19--26
Normal weight
26--30
Over weight
>30
Obesity

- 13 -
7. SLEEP FUNCTION
Stopped for more than 2 minutes without any operation, the system is reset to standby state and the
backlight is off. When it is more than 10 minutes, the system turns off all displays and enters a sleep
mode. Press any key to wake up.
8. SAFETY KEY FUNCTION
Whenever pull out the safety key, the treadmill will stop quickly, all data turn to zero. All the windows
display “OFF”. All normal operation must under safety key locked condition.
9. RUNNING DATA DISPLAY AND SETTING RANGE
DATE TABLE
TIME
PROG
Setting time/20= interval running time
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
P01
SPEED
1.2
1.8
1.8
2.4
3.1
1.8
2.4
3.1
3.1
1.8
2.4
3.1
2.4
2.4
2.4
1.2
1.8
1.8
3.1
1.8
P02
SPEED
1.2
2.4
2.4
3.1
3.7
2.4
3.7
3.7
3.7
2.4
3.1
3.7
2.4
2.4
2.4
1.2
1.2
3.1
2.4
1.2
P03
SPEED
1.2
2.4
2.4
3.7
3.7
2.4
4.3
4.3
4.3
2.4
4.3
4.3
2.4
2.4
2.4
1.2
2.4
3.1
1.8
1.2
P04
SPEED
1.8
3.1
3.1
3.7
4.3
4.3
3.1
4.3
4.3
4.9
4.9
3.1
5.5
3.1
3.1
3.7
3.7
2.4
2.4
1.8
P05
SPEED
1.2
2.4
2.4
3.1
3.7
4.3
4.3
3.1
3.7
4.3
4.9
4.9
3.1
2.4
1.8
1.8
3.7
3.1
2.4
1.2
P06
SPEED
1.2
2.4
2.4
2.4
3.1
3.7
4.9
4.9
3.7
4.3
4.9
4.9
3.7
2.4
2.4
1.2
3.1
2.4
1.8
1.2
P07
SPEED
1.2
1.8
1.8
1.8
2.4
3.1
1.8
2.4
3.1
1.8
2.4
3.1
1.8
1.8
1.8
3.7
3.7
3.1
1.8
1.8
P08
SPEED
1.2
1.8
1.8
3.7
4.3
4.3
2.4
3.7
4.3
2.4
3.7
4.3
2.4
2.4
2.4
1.2
1.8
2.4
2.4
1.2
P09
SPEED
1.2
2.4
2.4
4.3
4.3
2.4
4.3
4.9
2.4
4.9
5.5
5.5
2.4
2.4
2.4
3.1
3.7
1.8
1.8
1.2
P10
SPEED
1.2
2.4
3.1
3.7
4.3
3.1
2.4
3.7
4.9
4.9
3.7
3.7
3.1
2.4
2.4
1.2
2.4
2.4
1.8
1.8
P11
SPEED
1.2
3.1
4.9
6.2
4.3
4.3
6.2
6.2
4.3
4.3
6.2
6.2
3.1
3.1
5.5
5.5
3.1
3.1
2.4
1.8
P12
SPEED
1.8
2.4
5.5
5.5
3.1
5.5
3.1
4.9
3.1
5.5
4.3
3.1
3.1
4.3
5.5
5.5
3.1
4.3
3.7
1.8
P13
SPEED
1.8
3.7
4.3
3.1
5.5
5.5
4.3
3.1
3.1
4.3
5.5
3.1
4.9
3.1
5.5
3.1
5.5
5.5
2.4
1.8
P14
SPEED
1.2
1.2
2.4
3.1
3.7
3.1
2.4
1.8
1.2
0.6
1.2
1.8
2.4
3.1
3.7
3.1
2.4
1.8
1.2
0.6
P15
SPEED
1.2
2.4
3.7
4.9
3.7
3.7
2.4
2.4
1.2
1.2
1.2
2.4
3.7
4.9
3.7
3.7
2.4
2.4
1.2
1.2
SHOW RANGE
DEFAULT
PROGRAM
DEFAULT
MODE
SET RANGE
SPEED(KM/H)
0.5MPH—8.5MPH
--------
--------
--------
TIME
0:00—99:59
30:00
30:00
5:00---99:00
DISTANCE
0.00—99.9Miles
1.00Miles
--------
0.5—99.5Miles
CALORIES
0Kcl—999Kcl
50Kcl
--------
10Kcl—995Kcl

- 14 -
EXERCISE INSTRUCTIONS
Warm up stage：
If you are over 35 years old or have health problem, also it’s your first time do exercise, please consult
with your doctor or professional people.
Before you use the motorized treadmill, please learn how to control the machine first, know well how to
start, stop, adjust the speed and so on. After that, stand on anti-slip pad both sides and hold the handle
bar with your both hands. Keep the machine at the low speed about 1.0~2 .0 mph, Stand straight and
test the running machine by one foot, after get used to the speed, you can begin to run and can increase
speed to 1.9~3.1 mph. Keep the speed about 10 minutes, then stop the machine.
Exercise stage：
Learn how to adjust the speed and incline before using. Walk about 0.6 mile at stable velocity, it will take
you about 15-25 minutes. If walk at 3.0 mph, it will take you about 12 minutes in 0.6 mile. If you feel
comfortable at the stable velocity, you can add the speed and incline, after 30 minutes, you can have
good exercise. At this stage, you can not add the speed or incline too much at one time, it is good for
your health.
Exercise intensity：
Warm up at the speed 3.0 mph in 2 minutes, then add the speed to 3.3 mph and keep walking in 2
minutes, then add to 3.6 mph and walk in 2 minutes. After that, add up 0.2mph in each 2 minutes, until
rapid breath but not feel difficulty. Finally, you should slow down the speed step by step for 4Mints. If you
feel it is difficult to increase the speed to strengthening exercise, please increase the incline slowly.
Increasing the incline slowly will improve the exercise intensity greatly.
Calorie burning---the best effective way
Warm-up for 5 mints by the velocity: 2.5-3.0 mph, then slowly increase the speed by 0.2 mph/2Mints,
until up to the stable speed which you feel is Challenging for 45Mints. For improving the intensity of
movement, you can maintain the speed during 1H of TV program, then increase the speed by 0.2 mph
each advertisement interval time, after that return to the original speed. You can acquaint the best

- 15 -
efficiency of workout for calorie burning during the advertisement time and subsequent heart frequency
increasing time. Finally, you should slow down the speed step by step for 4Mints.
Exercise frequency：
The cycle time: 3-5times/Week, 15-60mints/Times. Make up the schedule of workout scientific, not only
for your hobby.
You can control the running intensity through adjusting the velocity and incline of treadmill. We suggest
that you don‘t set the incline at first; improve the incline is the effective way to strengthen the exercise’s
intensity.
Consult with your physician or health professional before starting your workout. The professional people
can help you make up the suitable exercise time-chart according to your age and health condition,
determine the velocity of movement, the intensity of exercise. Please stop at once, if you feel chest
tightness, chest pain, irregular heartbeat, breath difficulty, dizziness or other discomfort during exercise.
You should consult with your physician or health professional as keep going.
You can choose the normal walking speed or the jogging speed, if you always take workout with
treadmill.
If you don’t have enough experiences or confirm the testing velocity, you can follow the instruction:
Speed 0.6-1.9 mph: people not well physically
Speed 1.9-2.8 mph: people less movement or workout
Speed 2.8-3.8 mph: people normal walking
Speed 3.8-4.7 mph: Fast walking people
Speed 4.7-5.6 mph Jogging
Speed 5.6-7.5 mph intermediate speed running
Speed 7.5-8.5mph well experiences of running
Attention: The velocity of movement ≤3.8mph is suitable for normal walking. The velocity of movement
≥5.0 mph is suitable for running.

- 16 -
WARM UP INSTRUCTION
●Before exercise, it is better to do stretching exercises.
Warm muscles stretch more easily, spend the first of 5 ~ 10
minutes to warm up. Then in accordance with the following
methods to stop and do stretching exercises - do five times,
each leg every time 10 seconds or more time to do it again
after the end of the exercise.
1. Down the stretch: knees slightly curved, the body bent
forward slowly, so that the back and shoulders relaxed,
hands try to touch your toes. Maintain 10 to 15 seconds,
then relax. Repeat three times to do (see Figure l).
2. Hamstring stretch: sitting on the clean seat, put one leg
straight. Inward close to the other leg to make it close to the
inside leg straight. Hand tries to touch the toes. Maintain 10
to 15 seconds, then relax. Repeat for each leg do three
times (see Figure 2).
3. Legs and feet tendon stretch: two on the Rotary wall or
tree stand, one foot in the post. Keep legs straight and heel
to tilt the direction of the wall or tree. Maintain 10 to 15
seconds, then relax. Repeat for each leg do three times
(see Figure 3).
4. Quadriceps stretch: the left hand on the wall or table to
master balance, and then stretched his right hand back to
seize the right foot to the buttocks with slowly pull until you
feel the front thigh muscles tense. Maintain 10 to 15
seconds, then relax. Repeat for each leg to do three times
(see Figure 4).
5. Sartorius muscle (inner thigh muscles) stretch: Foot In
contrast, the knee outward to sit down. The hands grasp
the feet to the groin pull. Maintain 10 to 15 seconds, then
relax. Repeat three times (see Figure 5).

- 17 -
RUNNING BELT ADJUSTMENT
Warning: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE
CLEANING OR SERVICING THE UNIT.
Clean: General cleaning the unit will greatly prolong the treadmill.
Keep treadmill clean regularly. Be sure to clean the exposed part of the deck on either side of the
walking belt and also the side rails. This reduces the build up of foreign material underneath the walking
belt by wearing the clean running shoes.
Warning: Always unplug the treadmill from the electrical outlet before removing the motor
cover. At least once a year remove the motor cover and vacuum under the motor cover.
RUNNING BELT AND DECK LUBRICATION
This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction
may play a major role in the function and life of your treadmill, thus requiring periodic lubrication. We
recommend a periodic inspection of the deck. You need contact with our service center if you find the
damage of the deck.
We recommend that lubricate the deck according to the following timetable:
➢Light user (less than 3 hours/ week) annually
➢Medium user (3-5 hours/ week) every six months
➢Heavy user (more than 5 hours/ week) every three months
We recommend that you buy the lubrication from our distributor or directly to our company.
Attention: Any repair needs professional technician.
1. We suggest that you should cut off the power for 10mints after keep running 2HS, so that it’s good for
maintain the treadmill.
2. For avoiding the slipping during running, the belt not too loose, for avoiding the more abrasion
between the roller and belt and maintain the machine’s good running, the belt not too tight. You can
adjust the distance between plates and belt, the belt be away from the plates about 50-75mm on both
sides, if the best not too tight nor loose.

- 18 -
CENTER THE RUNNING BELT
●Place treadmill on a level surface. Run
treadmill at approximately 3.7-5mph, checking
the running condition.
If the belt has drifted to the right, Unplug the
safety lock and power switch, turn the right
adjusting bolt 1/4 turn clockwise, then start
running until centering the belt. PIC A
If the belt has drifted to the left, pull out of the
safety lock and switch, turn the left adjusting
bolt 1/4 turn clockwise, then start running until
centering the belt. PIC B
Timely adjust the tightness of the belt, for the
looseness after a period of time running. Pull
out of the safety lock and switch, turn the left
and right adjusting bolt 1/4 turn clockwise, then
re-start running, confirm the belt-tightness until
the belt be right tightness. PIC C

- 19 -
EXPLODED VIEW