EINHELL BT-CL 18 Li User manual

Original operating instructions
Cordless Lamp
BT-CL 18 Li

Art.-Nr.: 45.137.60 I.-Nr.: 11011
Anleitung_BT_CL_18_Li_EX_AUS__ 03.05.12 10:04 Seite 1

2
1
5
2
3
4
1
2 3
5
6
2
Anleitung_BT_CL_18_Li_EX_AUS__ 03.05.12 10:04 Seite 2

3
4
3
4
Anleitung_BT_CL_18_Li_EX_AUS__ 03.05.12 10:04 Seite 3

“Caution - Read the operating instructions to reduce the risk of injury”
4
GB
Anleitung_BT_CL_18_Li_EX_AUS__ 03.05.12 10:04 Seite 4

5
GB
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety regulations
The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout / Items supplied (Fig. 1/2)
2.1 Layout
1. ON/OFF switch
2. Adjustable head
3. Handle
4. Locking button for handle
5 Battery pack
6. Pushlock button
2.2 Items supplied
nOpen the packaging and take out the equipment
with care.
nRemove the packaging material and any
packaging and/or transportation braces (if
available).
nCheck to see if all items are supplied.
nInspect the equipment and accessories for
transport damage.
nIf possible, please keep the packaging until the
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
nCordless Lamp
nOriginal operating instructions
ncharger (1x in set included)
nBattery Pack (2x in set included)
3. Technical data
Voltage supply: 18V d.c.
Number of LED’s: 9
Weight: 0.3 kg
4. Before starting the equipment
Charge the battery pack with the charger supplied. An
empty battery pack requires a charging period of
approximately 1 hours.
For more details about charging the battery pack
please read the operating instructions of the 1-hour
charger.
Always remove the battery pack before making
adjustments to the equipment.
Important. Looking into the light beam more than
briefly may be harmful for your eyes.
Mounting and removing the battery pack
(Fig. 2/Item 5)
Mounting:
Push the battery pack (5) onto the equipment until it
latches in place.
Removing:
Press the pushlock button (6) and pull the battery
pack (5) out of the equipment.
5. Operation
5.1 Switching ON/OFF (Fig. 1/Item 1)
By pressing the ON/OFF button (1) for the first time, 3
LED lights illuminate.
By pressing the ON/OFF button (1) for the second
time, 6 LED lights illuminate.
By pressing the ON/OFF button (1) for the third time,
9 LED lights illuminate.
By pressing the ON/OFF button (1) for the fourth time,
the equipment is switched off.
Anleitung_BT_CL_18_Li_EX_AUS__ 03.05.12 10:04 Seite 5

GB
6
5.2. Adjustable head (Fig 3/Item2)
The adjustable head (2) can be adjusted back and
forth.
5.3 Handle adjustment (Fig 4/Item3)
The handle (3) can be adjusted in 6 different
positions. To change the handle position press the
locking button for the handle (4) and move the handle
in the appropriate position.
6. Cleaning, maintenance and
ordering of spare parts
Always remove the battery pack before starting any
cleaning work!
6.1 Cleaning
nKeep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
nWe recommend that you clean the device
immediately each time you have finished using it.
nClean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of
the equipment. Ensure that no water can seep
into the device.
6.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
6.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
nType of machine
nArticle number of the machine
nIdentification number of the machine
nReplacement part number of the part required
For our latest prices and information please go to
www.einhell.com.au
7. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
8. Storage
Store the equipment and accessories out of children’s
reach in a dark and dry place at above freezing
temperature. The ideal storage temperature is
between 5 and 30 °C. Store the electric tool in its
original packaging.
Anleitung_BT_CL_18_Li_EX_AUS__ 03.05.12 10:04 Seite 6

7
GB
 Technical changes subject to change
Anleitung_BT_CL_18_Li_EX_AUS__ 03.05.12 10:04 Seite 7

8

The reprinting or reproduction by any other means, in whole or in part,
of documentation and papers accompanying products is permitted only
with the express consent of ISC GmbH.
Anleitung_BT_CL_18_Li_EX_AUS__ 03.05.12 10:04 Seite 8

9
Anleitung_BT_CL_18_Li_EX_AUS__ 03.05.12 10:04 Seite 9

10
Anleitung_BT_CL_18_Li_EX_AUS__ 03.05.12 10:04 Seite 10

11
The guarantee provided in this Guarantee Certificate is given by Einhell Australia Pty Limited
ACN 134 632 858 of 6/166 Wellington Street, Collingwood, Victoria (Telephone number 1300 922 271)
(Einhell Express Guarantee)
tGUARANTEE CERTIFICATE
Dear Customer,
All of our products undergo strict quality checks. In the unlikely event that your device develops a fault, please
contact our service department at the address shown on this guarantee certificate. Of course, if you would
prefer to call us then we are also happy to offer our assistance under the service number printed below.
Please note the following terms under which claims under the Einhell Express Guarantee can be made:
1 The benefits conferred by the Einhell Express Guarantee are in addition to all rights and remedies which
you may be entitled to under the Australian Consumer Law, and any other statutory rights you may have
under other applicable laws. This Einhell Express Guarantee does not exclude, restrict or modify any
such rights or remedies.
We do not charge you for the Einhell Express Guarantee.
2. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not amount to a major failure.
3. The Einhell Express Guarantee only covers problems caused by material or manufacturing defects, and
our liability under the Einhell Express Guarantee is limited, at our discretion, to the rectification of these
defects or replacement of the product. Please note that the product has not been designed for use in
commercial, trade or industrial applications. Consequently, the Einhell Express Guarantee will not apply
if the product is used in commercial, trade or industrial applications or for other equivalent activities.
4. The following are also excluded from the Einhell Express Guarantee: compensation for transport
damage, damage caused by failure to comply with the installation/assembly instructions or damage
caused by unprofessional installation, failure to comply with the operating instructions (e.g. connection to
the wrong mains voltage or current type), misuse or inappropriate use (such as overloading of the
product or use of non-approved tools or accessories), failure to comply with the maintenance and safety
regulations, ingress of foreign bodies into the product (e.g. sand, stones or dust), effects of force or
external influences (e.g. damage caused by the product being dropped) and normal wear resulting from
proper operation of the product. The Einhell Express Guarantee will also not apply if any attempt is made
to tamper with the product.
5. The Einhell Express Guarantee is valid for a period of 2 years starting from the purchase date of the
product. Claims made under the Einhell Express Guarantee should be submitted before the end of this
guarantee period and within two weeks of the defect being noticed. No claims under the Einhell Express
Guarantee will be accepted if submitted after the end of this guarantee period. The original guarantee
period remains applicable to the device even if repairs are carried out or parts are replaced. In such
cases, the work performed or parts fitted will not result in an extension of the guarantee period for the
Einhell Express Guarantee, and the Einhell Express Guarantee will not apply for the work performed or
parts fitted. This also applies when an on-site service is used.
6. To make a claim under the Einhell Express Guarantee, please send the relevant product postage-free to
the address shown below and enclose either the original or a copy of your sales receipt or another dated
proof of purchase. It would help us if you could describe the nature of the problem in as much detail as
possible. If the defect is covered by the Einhell Express Guarantee, your product will be repaired
immediately and returned to you, or we will send you a new device (at our election).
Any costs incurred by you in making a claim under this Einhell Express Guarantee, unless specified
otherwise in this guarantee certificate, must be borne by you.
Of course, we are also happy to offer a chargeable repair service for any defects which are not covered by the
scope of the Einhell Express Guarantee or for products which are no longer covered by the Einhell Express
Guarantee. To take advantage of this service, please send the product to our service address.
EINHELL AUSTRALIA PTY LTD
6/166 Wellington Street- Collingwood VIC 3066
Australia - Phone: [phone]
Anleitung_BT_CL_18_Li_EX_AUS__ 03.05.12 10:04 Seite 11

EH 05/2012 (02)
Anleitung_BT_CL_18_Li_EX_AUS__ 03.05.12 10:04 Seite 12