Eitipok EP-BH100 User manual
EP-BH100
EP-BH100
Eitipok
Eitipok EP-BH100
Eitipok EP-BH100
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure
requirement in portable exposure condition without restriction.
01
1. Activate USB Wireless Dongle
1) Plug the Wireless Dongle into a USB port on your
computer, it will be turned on automatically.
2) Once turned on, the indicator on the Dongle will flash
quickly in blue indicating it is in pairing mode now.
Flashing blue quickly
EP-BH100 & PC Adapter
Pairing Instruction
When using EP-BH100 Wireless Mono
Headset on PC, it is recommended to connect
via the included USB Wireless Dongle.
02 03
3. Automatic Re-pairing
EP-BH100 can remember the Dongle paired previously.
After being paired successfully for the first time, make sure
the Wireless Dongle is plugged in the computer first and
then turn on EP-BH100.
4. Using Headset with Dongle and
Phone/Computer for Calls
Your EP-BH100 headset can be used with Dongle and your
phone/computer at a time.
1. Make sure the Dongle is plugged in and the Bluetooth
function on your phone/ computer is enabled before
turning on EP-BH100.
2. Music will be played via the Dongle. Your phone/
computer is for calls.
5. Troubleshooting
Q：The Wireless Dongle won’t turn on after plugging
into the USB port.
A：Try another USB port. After being plugged in, the
Dongle will power on automatically and the indicator
flashes blue quickly.
Q：The Wireless Dongle doesn’t pair with EP-BH100.
A：Please make sure the Wireless Dongle is in pairing
mode and EP-BH100 is in auto re-pairing mode, and
wait them to pair automatically.
Q：The Wireless Dongle won’t auto-reconnect with
EP-BH100.
A：Please make sure you plug in the Dongle first and then
turn on EP-BH100.
Q: Unable to play music after connected with EP-BH100.
A: Check if your headset is used with Dongle and your
phone/computer at the same time. If yes, music can be
played via the Dongle only.
2. Initial Pairing EP-BH100 with
Wireless Dongle
Before pairing, please disable the Bluetooth function
on your phone/computer previously connected with
EP-BH100.
1) Press and hold the Multifunction Button on EP-BH100
for 3 seconds to bring the headset into Auto Re-pairing
mode with the LED indicator flashing blue.
2) Dongle will connect with the headset automatically.
Once connected, the indicator on the Dongle will
stay solid blue. The indicator on the headset will flash
blue.
3S
Flashing blue
Flashing slowly in blue Solid blue
