SACKit Touch 400 User manual

1
SACKit Touch 400
USER MANUAL
BRUGERMANUAL
GEBRAUCHSANLEITUNG
UK
DK
DE

2
CONTENT
Thank you! ................... 3
Quick Start Guide.............. 4
Product overview .............. 4
Product functionality ........... 5
The device ................... 6
Troubleshooting .............. 7
Cleaning of the product......... 7
Technical specifications ......... 8
Important safety information .... 9
Disposal of the product ........ 9
Complaints ................... 9
Tak! ......................... 10
Quick Start Guide.............. 11
Produkt overblik ............... 11
Produkt funktioner ............. 12
Produktet .................... 13
Troubleshooting .............. 14
Rengøring af produktet ......... 14
Tekniske specifikationer......... 15
Vigtig sikkerhedsinformation ..... 16
Bortskaffelse af produktet ....... 16
Reklamationer................. 16
Vielen dank! .................. 17
Kurzanleitung ................. 18
Produktübersicht .............. 18
Produktfunktionen ............. 19
Das Gerät .................... 20
Fehlerbehebung ............... 21
Reinigung .................... 21
Technishe spezifikationen ....... 22
Wictige sicherheitshinweise ..... 23
Entsorgung des Produktes....... 23
Beschwerden ................. 23

3
THANK YOU!
Thank you for purchasing the SACKit Touch 400 from SACKit. Please read the entire
instruction manual before using the product and save it for future reference. We reserve
the right to change or update information and to correct errors or inaccuracies in the
text, images, and technical data. If you have any questions regarding technical problems
please contact our customer services. We hope you will enjoy your new SACKit Touch
400
Let SACKit rock your life!

4
QUICK START GUIDE
When you first get your SACKit Touch 400 headphones you need to charge it before it is ready for
use. SACKit Touch 400 is charged by using the included USB cable.
Charge SACKit Touch 400 for minimum 2.5 hours before using the product the first time.
Please turn off the headphones after use to prolong battery life.
PRODUCT OVERVIEW
Over ear design
Power on/o
3.5 mm. AUX
Charging port
Power indicator
LED indicator
Volume up/down
Hybrid acve noise
cancellaon (ANC)

5
PRODUCT FUNCTIONALITY
Here follows a description of all the product functions. Please use the ’Product overview’ on the previous
page to locate each button and area on the SACKit Touch 400 (page 4).
Over-ear design
• SACKit Touch 400’s design ensure both comfort and sound quality by direcng sound at you and
encapsulates the whole sound without being uncomfortable to wear for a longer me.
Volume down
• Press this buon to decrease the volume.
Volume up
• Press this buon to increase the volume.
Power on/off
• Master funcon buon. (X-buon)
• Used to power SACKit Touch 400 on and o.
• Plays and pause music when the headset is in Bluetooth mode.
• Accepts and rejects incoming calls.
Power indicator
• Indicates when SACKit Touch 400 is turned on and o.
• Flashes when SACKit Touch 400 is in Bluetooth pairing mode.
Hybrid-ANC
• Press the Acve Noise Cancellaon buon to acvate ANC.
• With ANC acvated you can minimize background noise to further enjoy your music.
• Toggle on the buon to acvate talk-through mode while wearing your SACKit Touch 400.
Charging port
• Use this port to charge SACKit Touch 400 with the included USB-C charging cable.
LED indicator
•Turns on when SACKit Touch 400 is charging.
3.5 mm. AUX
• 3.5 mm AUX jack connecon to connect the headset to a device without Bluetooth.
• In-line use is also possible when the headset is turned o.

6
How to use Bluetooth
1. Long press the power on/o buon for 10 sec. Aer the rst 5 sec., you will hear the ”ON” sound.
Keep pressing the buon for another 5 sec. to turn on pairing mode, indicated by ashing the
power indicator red and blue.
2. Go to the Bluetooth sengs on your device and make sure Bluetooth is turned on.
3. Look for “SACKit Touch 400” in the list of bluetooth devices.
4. When it appears, tap the name to pair. The speaker emmits a conrmaon voice saying: ”Connec-
ted” as soon as it is paired.
5. Your device is now connected to SACKit Touch 400 and you can enjoy your music.
6. The music can be paused / played by pressing the Power buon.
7. SACKit 400 will automacally pair with the last connected device.
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecng opportunies won’t appear on the new device.
THE DEVICE
Operaon instrucons for use aer rst pairing.
1. Aer rst pairing your SACKit Touch 400 and your bluetooth device will be conncted automacally
2. Bluetooth device will automacally reconnect, the LED light will blink blue once SACKit Touch 400
is succesfully paired.
3. Turn the headphones on by holding down the ”X buon” unl you hea the ”ON” sound.
4. Long press ”on/o” to turn o SACKit Touch 400.
How to use the Acve Noise Cancellaon funcon
1. Push the ANC buon on the le ear cup turning on the green LED light and you can enjoy the
headphones in Acve Noise Cancellaon mode
2. When you don’t need the Acve Noise Cancellaon funcon, turn the ANC funcon of by pus-
hing the ANC buon.
3. Acve Noice Cancellaon can be acvated and deacvated even when the SACKit Touch 300
Headphone is turned o. The Acve Noise Cancellaon will also remain on even when you turn
the SACKTouch 300 Headphone o.
Operaon instrucons for in-line use
Use the 3.5mm audio cable when you do not wish to use Bluetooth connecon. In-line use is also pos-
sible
when the headset is turned o.
For in-line use:
Use the 3.5mm audio cable when you do not wish to use Bluetooth connecon. In-line use is also pos-
sible when the headset is turned o.
Battery information
• Baery: rechargeable Polymer Lithium-Ion Baery, 500 mAh.
• Power: 5V DC 1A via USB-C. Please use the USB cable sealed with our headphone for charging
• Charging Time: Please be sure the baery has been fully charged before rst use. It can take up to
3 hours of charging the rst me, but 2 hours normally with a 5V 1A adapter.
• NOTE: If the pairing is not succesfull, please turn the headphones oof and back on and retry pairing.

7
TROUBLESHOOTING
If you have trouble operang SACKit Touch 400, please search the following opons for solving
the problem. If these soluons do not help x your problem, please contact our customer service at
inf[email protected].
I experience issues with stability and connecon
Try to delete the pairing between SACKit Touch 400 and your device on the device. You do this by
accessing the Bluetooth sengs on your device and choose “SACKit Touch 400”. Now pair
SACKit Touch 400 and your device by following the descripon found on page 6.
SACKit Touch 400 is not playing music while connected to my device
• Please check volume on your audio device to make sure it is outpung sound.
• If you use in-line please make sure that the 3.5mm plug is fully inserted into your audio device and
headset. And please make sure the headphone plug and audio device’s jack scks are clean
• If SACKit Touch 400 is used wirelessly and sll is not playing music, you manually have to choose
toplay from SACKit Touch 400 in your device sengs. Please refer to the instrucon of your
device orspecic app for further informaon.
I’m hearing a beep-sound in my headset
• When SACKit Touch 400 makes a beep-sound, they need recharging. Please charge your headphones
fully.
I don’t feel like SACKit Touch 400 is comfortable to wear
• Please adjust the length headband by pull/pushing the earcups to adjust to headset for a comfortable
t.
I can’t turn on my SACKit 400
• Please recharge your headset by leaving the headset in the charger for minimum 4 hours.

8
TECHNICAL SPECIFICATIONS
• Model: SACKit Touch 400 Bluetooth and hybrid- ANC headphones
• Bluetooth version: V5.0
• Operang distance: 10M
• Bluetooth Mulpoint
• Charging me: 2.5 hours
• Charging current: 350mA
• Music playing me: 13 hours (bluetooth on, ANC on) 18 hours (Bluetooth on, ANC o)
• Call me: 25 hours
• ANC soluon: AMS
• Noise reducon performance: up to 27-30dB
• Frequency Range: 20Hz-20KHz
• Impedence:ANC_OFF:80Ω ANC_ON :110Ω
SACKit ApS declares that the radio equipment type SACKit Go 400 is in compliance with Direcve
2014/53/EU. The full text of the EU declaraon of conformity is available at the following internet
address: hp://SACKit.eu/support.
CLEANING OF THE PRODUCT
1. Kindly switch o SACKit Touch 300 before you clean your headset and remove it from the power-
supply
2. Do not use any strong chemicals to clean the product as this may damage the surface or fabric.
3. Please use a damp coon- or microber cleaning cloth instead.
4. During cleaning please be aware to avoid water in the USB port or other openings. Large amounts
of water and uids may damage the SACKit Touch 400.
5. Use a so, dry, and lint-free cloth to gently clean the speaker fabric.
• NOTE: Avoid using sharp objects to clean SACKit Touch 300

9
IMPORTANT SAFETY INFORMATION
Please read the following informaon and operate the product and accessories accordingly to ensure
correct and safe use of the product. We are not responsible for damage caused by failure to comply with
the instrucons or irresponsible use of the product.
Warning
To prevent any res or electrical hazards please act according to the following guidelines:
• Do not disassemble or replace any parts of this device. Please contact professional maintenance or
qualied service center if there is any damage to the device.
• Do not place in any liquids.
• If any liquids nd its way inside the product, please shut down the product and contact customer
service center.
• Do not place this device in or close to sources of excessive heat or re. (Such as: candles, replaces
or direct sunlight).
• Keep this device away from any dust and vibraon.
• Do not use excessive force when using any of the control buons.
• If the product is below 5°C when you receive it, please open the product packaging and wait for it
to reach room temperature.
• To prevent overheang of the product is it necessary to keep a cleared area of 10 cm around the
product while charging.
• Be sure to place this device on stable, at and level surfaces while charging.
DISPOSAL OF THE PRODUCT
SACKit Go 400 is made from recyclable and high quality materials. Do not dispose of together with
household garbage. Please understand the local classicaon about collecng electronical, electrical
products that contains baeries. Correct disposal of the product will help to prevent negave impact to
the environment.
COMPLAINTS
Please contact our customer service if you have a complaint or a broken SACKit Go 300 S. If your spe-
aker has a defect, please inform your serial number (placed on the boom) when you contact us.

10
THANK YOU!
Tak fordi du har købt denne SACKit TOUCH 400 fra SACKit. Læs venligst hele
brugermanualen før du tager produktet i brug, og gem den til senere brug. Vi tager
forbehold for fejl i tekst, billeder og andre tekniske data. Hvis du har spørgsmål vedrørende
tekniske problemer så kontakt vores kundeservice på [email protected]. Vi håber, at du
bliver glad for din nye SACKit TOUCH 400.
Enjoy great sound on the Go!