Elecom WRC-1167GHBK3-A User manual

■Nameandfunctionofeachpart
Checkthelitstatusofthelamps.
•Checkthatthelampsonthemodemorsimilardevice
andthisproductarelitcorrectly.
Connectthedevices.
Refertothediagramandwirethedevices.
Terminaldevice
(cableTVmodem,
ONU,CTU,ADSL)
LANcable
INTERNETport(blue)
*Verticalorientation
POWER:Lit
INTERNET:
Blinkingorsolid
❶Connectthepowercableoftheterminaldevice.
・Ifapowerswitchispresent,slidetheswitchtotheonposition.
❷Connecttheincluded
ACadaptertothisproduct.
Turnontheterminaldeviceandthisproduct.
■Usingthisproductinroutermode
Setup Guide
WRC-1167GHBK3-A・WRC-F1167ACF2・WRC-1167FEBK-A・WRC-733FEBK2-A
Installationmethodandprecautions
Thestandisnotfixedtotheproduct.Connectthecablestotheproduct,
andthensettheproductintothestand.
Thisproductcanbeinstalledverticallyorhorizontally.Witheitherorienta-
tion,besuretostabilizetheproductbysettingitintotheincludedstand.
Also,witheitherorientation,takemeasurestopreventtheproductfrom
fallingoverandthecablesfrombeingpulledout.Theproductfallingover
orthecablesbeingpulledoutfromtheconnectorswhiletheproductisin
operationmayleadtomalfunctionsordataloss.
◆Verticalorientation
•UsethesidewiththeLEDlampsasthefront.
•Refertotheillustrationandsettheproduct
intotheincludedstandsothatthebackofthe
product fits snugly in the grooves on the
stand.
◆Horizontalorientation
•UsethesidewiththeLEDlampsasthetop.
•Placetheproductontheincludedstandso
that the product is on top of the center,
backpartofthestand,andthenensurethat
theproductissteady.
Thismanualprovidesasummaryofandthespecificationsforthisproductaswellasexplainsthisproduct'susage
precautions.
ItalsocontainsanFAQthatexplainsactionsyoucantakeifyouhaveproblemssuchastheproductmalfunctioning.
NotethatthismanualiscommonfortheWRC-1167GHBK3-A・WRC-F1167ACF2・WRC-1167FEBK-A・WRC-733FEBK2-A.
Back
Back
Back
❶ToanACoutlet
ACadapter
ACoutlet
WPSlamp
(red)
Blinking:
Off:TheWPSfunctionisnotrunning.
TheWPSsettingbuttonhasbeenpressed,andtheWPSfunctionisrunning.
Thislampblinksonceevery0.5secondforapproximately2minutes.
POWERlamp
(white)
Lit:Theproductison.
Off:Theproductisoff.
2.4GWLANlamp
(white)
5GWLANlamp
(white)
WPSsetting
button
Resetbutton
LANport/
LANlamp
1-4(white)
INTERNETport/
INTERNETlamp
(white)
DCIN
( powersupplyjack)
Stand
Leftside Back
Theselampsindicatetheconnectionstatusofthe2.4GHzband(11n/g/b)andthe
5GHzband(11ac/n/a).
Lit:Thecorrespondingbandcanbeused.
Blinking:Thecorrespondingbandisinuse.
Off:Thecorrespondingbandisdisabled.
Usethisbuttonwhenyouareconnectingtheproducttoawirelessslavedevice
(suchasawirelessadapter)thatisequippedwithaWPSfunction.
Tousethisfunction,pressthisbuttonfor2secondsormore.
Whenyoupressthisbuttonforapproximately5seconds,theWPSlampblinks
andtheproduct'ssettingsareinitialized(returnedtothefactorydefaultvalues).
Donotturnofftheproductuntilthelampstopsblinking.
UsetheseportstoconnectthisproducttoPCsorothernetworkdevicesovera
wiredLAN.ThereisanLEDlampnexttoeachport.
Lit:ThelinktothePCornetworkdeviceconnectedoverawiredLANhasbeen
established.
Blinking:Dataisbeingtransferred. Off:Thecableisdisconnected.
ConnectthecablefromtheWAN(Internet)deviceofthemodem(ONU,CTU,and
othertypes).ThereisanLEDlampnexttotheport.
Lit:ThelinktotheWANdevicehasbeenestablished.
Blinking:Dataisbeingtransferred. Off:Thecableisdisconnected.
ConnecttheACadapterincludedwiththisproducttothisjack.Donotconnect
anyACadaptersotherthantheoneincludedwiththisproduct.
Youcanusethestandincludedwiththisproducttoorientitverticallyor
horizontally.Fordetailsonhowtousethestand,see"Installationmethodand
precautions"below.

 Configuring settings from smartphones and tablet PCs Configuring settings from smartphones and tablet PCs
WRC-GHBKSeries／WRC-FEBK-ASeriesSetupGuideJuly28,2016,Version4©2016 ELECOMCO.,LTD.ALLRIGHTSRESERVED.
・ AndroidOS4.0orlater•iOS8.0orlater
・ WindowsXP(SP3orlater)/Vista(SP2orlater)/7(SP1orlater)/8/8.1/10/RT
・ ThisproductonlysupportsMacOSX10.9orlater(onlydevicesthatareequippedwithanIntelCPU).
■Operatingenvironment:
Settingthisproductinroutermode
ThisexplanationusesanAndroidterminal.
*WerecommendthatyouturntheBluetoothfunctionoffinordertopreventradiowaveinterference.
*Inordertoinstall[SkyLinkManager],yourequireanenvironmentinwhichyoucanconnecttotheInternet.
*PerformSkyLinksetupwithin10minutesofconnectingtheACadapter.
*Thescreensmayvarydependingontheapplicationversion.
Ifthemessage"インターネットが検出されま
せんでした"isdisplayed,tap"手動設定"to
configurethesettings.
Ifyoucannotsavethesettings,tap
"Troubleshooting."Alternatively,
searchfor"ELECOMSupport"inyour
webbrowserorcalltheELECOM
networksupportcenter.
OnlyPPPoEisdisplayed.
❶Thescreenontheright
willbedisplayed.Enter
theusernameand
passwordthatyou
havereceivedfrom
yourprovider,and
thentap"次へ"
Establishingaconnectionusingsimplesetup
"Simple Setup" is a method that even inexperienced users can use to configure the
settingsjustbytappingbuttonsintheapplication.
*Themovieswillnotbedisplayedonsmartphonesthatarenotreceivingradiowavesorifyouhavenotyet
signedacontractwithyoursmartphone'sserviceprovider.
*Whenchangingthesettingofarouter,thanit's
established" クラシック設定 "atasetend,please
confirmtheusernameandthepasswordmore.
*Whennotunderstandingsettinganymore,
pleaseredosettingfromthebeginningaftera
reset.
Readtheend-user
licenseagreement,and
thentap"同意"ifyou
havenoproblemswith
theagreement.
T a p  " ス カ イ リ ン ク セ ット
アップ"onthemenu.
●Ifyoucanconnectto
theInternet,the
settingsarecomplete.
*Itmaytakeapproximately
3minutestosearchforthe
SSID.
*Amodelnumberdifferingfrom
thatofthisproductmaybe
displayed.
*IftheSSIDisnotdetected,the
screenontherightwillbe
displayed.PresstheWPS
buttonforapproximately5
seconds.Theapplicationwill
detecttherouterandretrieve
theconnectionprofile.The
profilewillbeinstalled
automaticallyafteritis
retrieved.
Theapplication
searchesfortheSSID
foruseinconfiguring
thesettings.Waituntil
thedetectionis
finished.
Onyourterminal'shome
screen,tapthe[SkyLink
Manager]icon.
Searchfor[SkyLinkManager]inthe
"GooglePlaystore,"andtheninstallthis
application.
Aftertheprofile
installationis
finished,tap"次へ."
Thiscompletesthe
setupprocedure.
Tap"終了"
Selectthenameofa
devicethathas
beenset,andthen
tap"OK."
Openawebbrowser.
Tap" ルーターモード ."
Tap"簡単設定."
Therouterrestartsin
ordertoapplythe
settings.Afterthe
settingsaresavedon
therouter,tap"次へ."
*IfyouareusingaDHCPconnection,tap"次へ"
withoutenteringtheusernameandpassword.
*Youcanenternumbers,alphabetcharacters,
""(underscore),"-"(hyphen),"@"(atsign),";"
(semicolon),":"(colon),"*"(asterisk),"#"(number
sign),"%"(percentsign),and"/"(slash)forthe
usernameandpasswordintheprovider
information.
Thechangeannounce-
mentscreencontents
arechecked,tap"次へ."
*Ifyoudo"詳細設定",tap"クラ
シック設定".