Electrolux FOM 71 CLS User manual

2010.11.30
438 9094-21/ENOperating manual in original language
Maintenance manual
for reference machines
Washer extactors
FOM 71 CLS, FOM 71 MP-Lab
IEC 60456 Ed 5

3
Contents
Contents
Introduction.............................................................................................1:1
Wascator FOM 71 CLS
Software versions ...................................................................................2:1
Installation inspection of the reference machine ....................................3:1
Calibration of the level control system....................................................4:1
Calibration of the scale system...............................................................5:1
Installation of laboratory sensors for temperature and ...........................6:1
speed connection for external weight signal
Adjustment of temperature, speed and water ........................................7:1
Cleaning the machine from lint, scale and detergent .............................8:1
Maintenance before start up of a test series ..........................................9:1
Regular maintenance 6 - 12 months.....................................................10:1
Empty run test data CLS.......................................................................11:1
Program description CLS......................................................................12:1
FOM 71 MP-Lab
Installation inspection of the reference machine…...............................13:1
Calibration of the level control system……………................................14:1
Installation of laboratory sensors for temperature and speed. .............15:1
Adjustment of temperature, speed and water……………….................16:1
Flow meter: Installation…………………………….............. ...................17:1
Flow meter: Calibration………………………….................. ...................18:1
Flow meter: Change of amount of water…………................ ................19:1
Flow meter: Maintenance…………………………..................................20:1
Cleaning the machine from lint, scale and detergent ….......................21:1
Maintenance before start up of a test series………..............................22:1
Regular maintenance 6 – 12 months………………...............................23:1
Empty run test data MP-Lab……………………….............. ..................24:1
Program description MP-Lab………………………............. ..................25:1
Programming charts Mp-Lab………………………............. ..................24:1
Installation of flow meter control (438 9041-07/04)…............... Appendix 1

1:1
Introduction
Introduction
The Maintenance manual for reference machines shall be used when performing
washing machine tests according to the international standard IEC 60456 Ed 5.
The purpose of this manual is to help the user to keep the reference machine in
best condition in order to minimize the inaccuracy of the results caused by the
reference machine.
The manual only deals with the approved reference machines in IEC 60456 Ed 5:
Wascator FOM 71 CLS and, FOM 71 MP-Lab equipped with flow meter 472 99
0298..

Wascator
FOM 71 CLS

2:1
Wascator FOM 71 CLS
Software versions
Software 1.3:
Original software installed from production start
Software 1.7:
Introduced 2004-04-28 from serial number 005200049196
Changes: Following parameters added to Settings 1:
START SLOW FILL MM Default value = 0
IS TEMP ADJUST ADD Default value = 0
IS TEMP ADJUST SUB Default value = 0
Software 1.8
Introduced 2007-01-27 from serial number 005200089296
Changes: Following parameters added to Settings 1:
SPEED CALIB. LOW RANGE IN % Default value = 1000
SPEED CALIB. HIGH RANGE IN % Default value = 1000
SHOWED SPEED CALIB. LOW' Default value = 1000
SHOWED SPEED CALIB. HIGH' Default value = 1000
Software 2.0
Introduced 2009-08-25 from serial number 005200126347
Changes: Software bug regarding first fill corrected.
Following parameters added to Settings 1:
BACKLIGHT Default value
Rev 2.03
Introduced 2009-12-18 from serial number 005220402809
Changes: Default values changed:
IS TEMP ADJUST ADD Default value = 0
IS TEMP ADJUST SUB Default value = 3
Software 3.0
Introduced 2010-04-12 from serial number 005220405727
Changes: Software bug corrected.
Bug does not affect testing in accordance with IEC standards.
All software from 1.30 is suitable for IEC 60456 testing, but version 1.8 is recommen-
ded. Contact your nearest Electrolux Laundry Service Centre for downloading instruc-
tions.
Software versions