Electronics Worldwide EASYFIND User manual

Camping Satellite System Quick Start Guide
Dish Set UP
1. Assemble the dish as per instructions enclosed with feed arm contents in the brown box.
- For camping case system choose mounting method of choice
- For tripod mounted systems open out Tripod and push on tripod head (do not tighten thumb
screws at this stage)
2. Fix Dish to Tripod head using U clamp in feed arm box
3. Set dish elevation to 26°.
To do this loosen the wing
nut on the dish bracket
and slide up or down until the
notch is set pointing at 26°.
Try to be as accurate as possible.
4. Skew LNB 15° anti-clockwise from behind the dish. To do this stand behind the
dish so you are lookingat the yellow end cap, now line up the third marking to the
right of the centre triangle to 12 o’clock. Try to be as accurate as possible.
5. The dish face should be at roughly 90° to the ground and the cable from the LNB should be pointing to the
ground (LNB feed arm should be angled at 26° to the ground). Find a position for the dish with no trees or
obstructions when the dish and LNB are pointing at 145° (SE)
Congratulations on your new purchase and welcome to the world of “EASYFIND” Satellite TV, the simpleist system
to set up and operate. Everything you need to watch Free To Air satellite TV is included in this system apart from
the TV!
This guide will take you through the simple process required to get you watching all your favourite channels as
soon as possible.
Yellow End Cap
Center Triangle Marking
Third Line to the right Marking
Wing Nut
Notch
Angle Markings
electronics
WORLDWIDE

9. Switch on receiver and TV and select correct AV input on your TV
10. Push the “menu” button your remote control, you should now see the screen as illustrated below:
6. Connect your TV to receiver using the provided scart lead
Tuning in the System
Lead Connection
7. Connect the coaxial cable to the LNB and to the receiver LNB Input
8. Connect the power leads to the reciever and to your TV
11. Using the up and down arrows on your remote control highlight the flag at the top left of your
screen and push “OK” on your remote control. Then select “English” and press “OK”

12. Now push “Exit” until you see the “no signal “screen”
14. Now using your left and right arrows on your remote control select “easy find digital”
13. Press “OK” on your remote control, you see the screen below:

17. On the remote control, press the “INFO” button. The screenwill now display various
data fields, including two strength barswhich show readings for Signal Intensity and Signal Quality.
Ideally, for good quality reception, the signal intensity should bearound 80%+ plus and the signal
quality 65%+.
15. Now using your up and down buttons select “Astra 28*E” then “OK”
16. Now push “Exit” until you see the “no signal “screen

18. By pushing info you should have activated the “Easy-Find” LNB and by now the LED in
the housing on top of the LNB should be illuminated RED.
19. Now starting with the dish facing East move the dish slowly to the right at South east the LED
should change colour. Make small movements with the dish left and right and the light should
change from RED to AMBER, now all that is required is very small and slow movements of the dish
to change the light to GREEN.
E
S
N
W

22. Now push “Exit” You should now be up and running.
21. Now press “OK” and using your left and right arrows on your remote control select “Astra 28.2E”
If not the main things to check are:
1. Check that the LNB Skew is correct
2. Check that the elevation is correct
3. Check all of the connections are solid
4. Check that there is nothing inbetween the LNB and the sky, a good
way to do this is to look along the top of the LNB like it is a sight
5. Check that the disply (i.e TV screen) is set to the appropriate input
channel
20. Now again check the signal quality and intensity by pressing “info” , if over 80% intensity and 65%
quality, press “info” to view. If you have high intensity but not so high quality there is most likely an
obstruction between the dish and the satellite, i.e. trees
electronics
WORLDWIDE
Electronics Worldwide Ltd
PO Box 1038, Warrington, WA1 9BS
Technical Support: 0906 700 10 20
Email: [email protected]
(All calls to this number are charged at 50p/minute)