Kathrein MobiSet 3 Twin CAP 750 User manual

Translation of the original
operating manual
CAP750
English
MobiSet3 Twin
CAP750
IMPORTANT
Read carefully
before use!

2 of 56
Contents
1 General 4
2 Scope of Delivery 5
3 Intended Use 6
4 Safety Instructions and General Guidelines 7
5 Installation and Connection 12
5.1 Installing and Connecting the Turntable 12
5.1.1 Required Tools and Equipment 12
5.1.2 Unpacking and Preparing 12
5.1.3 Selecting the Installation Location 13
5.1.4 Installing the Cable Gland and Mounting Plate 15
5.1.5 Possibilities of the Turntable Installation 17
5.1.6 Installing the Turntable 19
5.2 Installing and Connecting the CAP Converter 20
5.2.1 Selecting an Installation Location 20
5.2.2 Preparing the CAP Converter for Installation 22
5.2.3 Important Instructions for Installation 22
5.2.4 Installing the CAP Converter on a TV Set 23
5.2.5 Installing the CAP Converter 24
5.2.6 Laying the Cables and Connecting the Turntable 25
5.2.7 Connecting the CAP Converter 25
5.2.8 Functional Instructions for Connection to the On-board Power Supply 27
5.2.9 Connection Example for 12 V Battery Connection 27
6 Reception Range/Footprint 28
7 Dismantling for Servicing 29
7.1 Dismantling the Turntable 29
7.2 Address of the Service Centre 29
8 Polarisation Setting 30
8.1 About Polarisation Setting 30
8.2 Safety Instructions 32
8.3 Setting Operations 32
9 Manually Lowering the Antenna to Park Position 34
9.1 Safety Instructions 34
9.2 Manual Lowering 35
10 Technical Data 36
10.1 Dimensions (in mm) 36
10.2 Technical Data 38
11 DEKAsylMS Safety Data Sheet 39
12 DEKYsylMS Technical Data Sheet 46

3 of 56
13 Operating Instructions CAP750 48
13.1 Safety Instructions and General Guidelines 49
13.2 Installing the CAP Converter 50
13.3 Change of Location 50
13.4 Operating the Turntable Using the External Push-button 51
13.4.1 Starting the Turntable 51
13.4.2 Moving the Turntable to the Park Position 51
13.4.3 Resetting the CAP System 51
13.5 Updating Software and Channel List 51
13.5.1 Updating the Channel List 51
13.5.2 Updating Software 51
13.6 LED Status Indicator on the CAP Converter/External Push-button 52
14 Declaration of Conformity 53
15 Waste Disposal 54

4 of 56
General
1 General
Dear Customer, Chère Cliente, Cher Client, Gentile cliente, Estimado cliente,
GB
You can obtain an English version of our mounting instructions from our representatives in your country1) or download
one from our web site2).
F
Vous pouvez obtenir un manuel d‘installation en français chez notre représentant en votre pays1) ou le télécharger de
notre site Web2).
I
Lei puo avere la versione italiana delle istruzioni di montaggio dalla nostra rappresentanza1) piu vicina della sua città,
oppure scaricarla dalla nostra web site2).
E
Para obtener la versión española de nuestro manual de instalación, contacte nuestros representantes en su país1) o
bajela de nuestra página de internet2).
1) https://www.kathrein.com/en/company/kathrein-worldwide/
2) http://www.kathrein.de/qr/en/sat
Company address and accredited representative
KATHREIN-Werke KG
Anton-Kathrein-Straße 1 – 3
83022 Rosenheim, Germany
Anton Kathrein,
Personally liable Managing Director of
KATHREIN-Werke KG

5 of 56
2 Scope of Delivery
①Satellite dish 60cm
②Twin LNB
③Turntable with integral controls
④CAP converter
The MobiSet3 CAP750 consists of:
●turntable complete with control electronics, pre-assembled satellite dish and Twin LNB
●mounting plate
●complete cabling set:
1x master coaxial cable1), 3m, marked in red, for connection to the CAP converter2)
1x slave coaxial cable1), 3m, for connection to a second TV with an integrated receiver/receiver
1x power supply cable1), 3m, for connection to the on-board power supply (incl. blade-type fuse 15A)
1x coaxial extension cable, 5m, F-type female connector to F-type male connector
1x power supply extension cable, 7m
●roof duct with sealing gasket
●DEKAsylMS adhesive sealant (100ml tube)
●CAP converter with a 12V connection cable and LED/push-button cable
●4 x wood screws 4.5 mm x 30mm
●MobiSet3 CAP750 installation manual
1) fixed connection to the turntable
2) In order to connect a TV to the CAP converter, you will need a coaxial cable F-type female connector/F-Type female connector,
the length of which depends on the distance between the TV and the CAP converter. This cable is not included in the scope of
delivery. For more information, see 13.2,p.50.
1
2
3
4