Eleiko 3062966 User manual

ELEIKO OLYMPIC
INCLINE BENCH
Art.no. 3062966, 3062967

Read before installation and use
Safety instructions
Warning labels
List of components
Assembly instructions
Tools needed
User guide
Purpose
General instructions for use
Product specifications
Care and maintenance
Preventive maintenance and inspections
Spare parts and service
Warranty
4
4
5
6
8
8
16
16
16
16
17
17
17
17
CONTENTS

Install and use this equipment in a place where access and supervision are specifically controlled by the owner.
Be sure to install the equipment on a stable base and level the equipment properly. Eleiko recommends that all
equipment is secured to the floor and installed by a licensed contractor or an Eleiko installer.
This equipment is intended for indoor use only.
SAFETY INSTRUCTIONS
It is the responsibility of the purchaser of ELEIKO products to instruct all users and supervising personnel on
proper usage of the equipment.
All included warnings (labels) and instructions MUST be read before the use of any Eleiko 1.
equipment. Only use the equipment as it is intended.
A user MUST get a medical examination and proper instructions before using any Eleiko 2.
equipment.
DO NOT let anyone, under any circumstances, use equipment that appears to be damaged. Do not 3.
try to repair any equipment before consulting an Eleiko technician.
DO NOT replace components of Eleiko equipment with other, none Eleiko, equipment (magnetic 4.
safety pin, frames, bars etc.). Do not improvise! If there are any doubts, consult an Eleiko
representative prior to any intervention.
DO NOT overload the equipment and DO NOT try to exceed personal strength levels. 5.
Children under the age of 14 must be supervised by an adult. 6.
DO NOT remove any safety labels from the Eleiko equipment. Eleiko is not responsible if a label is 7.
removed. Replace damaged labels immediately.
Eleiko packaging for products an be made of wood. Be aware of splinters! You MUST use 8.
protective gloves and proper work wear.
Eleiko packaging material could be a risk when handling. Be aware of crushing! You MUST use 9.
work wear including protective gloves and hard shoes.
Eleiko products and packing material are heavy, You MUST use proper lifting techniques, work 10.
wear and hard shoes.
- 4 -
READ BEFORE
INSTALLATION AND USE

- 5 -
WARNING LABELS

1x
LEFT FRAME
2001355
3000197p14
RIGHT FRAME
1x
1x
3085500 a4
BACK REST FRAME
1x
1x
LEG FRAME
3000197p14
2001345
SEAT SUSPENSION
1x
1x
3085437 p25
M10 x 30
2001435-L30
20x
K6S M10 x 25
2000675-L25
4x
K6S M10 x 20
2000675-L20
4x
4x
3085374 a7
4x
3061757 p30
3085460
2000378
2001354
2001345
2x
3080009 p23
- 6 -
LIST OF COMPONENTS

1x
BACK REST UPHOLSTERY POLYURETHANE
2001273
1x
SEAT UPHOLSTERY POLYURETHANE
2001276
1x
BACK REST UPHOLSTERY SKAI LEATHER
2001391
1x
SEAT UPHOLSTERY SKAI LEATHER
2001393
- 7 -
UPHOLSTERY
OR
OR
LIST OF COMPONENTS

0,6 m
0,6 m
0,6 m
0,6 m
ALLEN KEY SIZE 6
- 8 -
Before assembly, make sure you have enough clearance on all
sides of the equipment, not less than 0,6 meters. Take in account
the accessibility to remove and replace bar and weights.
TOOLS NEEDED
You need the following tools to assemble the equipment.
NOTE: Do not use electric power tools for assembly.
ASSEMBLY INSTRUCTIONS

RIGHT FRAME
1x
1x
3085500 a4
M10 x 30
4x
START HERE!
BE CAREFUL WHEN LAYING FRAME
ON THE GROUND TO PREVENT DAMAGE!
1x
3080009 p23
1.
- 9 -
LOOSE SCREWS!

1x
LEFT FRAME
M10 x 30
4x 1x
3080009 p23
2.
- 10 -
START HERE!
LOOSE SCREWS!

BACK REST FRAME
1x
1x
LEG FRAME
SEAT SUSPENSION
1x
M10 x 30
4x
3.
- 11 -

1x
3085437 p25
1x
BACK REST UPHOLSTERY
K6S M10 x 25
4x
4.
- 12 -
THIS END OF BACK REST AWAY FROM SEAT SUSPENSION!
TURN 3085437 p25 SO THAT HOLE PATTERN MATCHES PERFECTLY!

1x
SEAT UPHOLSTERY
K6S M10 x 20
4x
5.
- 13 -

M10 x 30
4x
6.
- 14 -

4x
3061757 p30
M10 x 30
4x
4x
3085374 a7
7.
- 15 -
TIGHTEN ALL SCREWS!

1626
1720
1508
- 16 -
PURPOSE
The unit is designed to be used for a variety of bench press excersises from a
inclined bench position.
GENERAL INSTRUCTIONS FOR USE
Ideally use a barbell that meets or is IWF/IPF-certified. 1.
Never stand on the pad and never put the barbell on the cushion. 2.
150 kg / 330 lbs
350 kg / 770 lbs
85 kg / 187,4 lbs
1626 x 1720 x 1508 mm
64,02 x 67,72 x 59,37"
PRODUCT SPECIFICATION
Max user weight
Max training weight
Product weight
Dimensions (L x W x H)
USER GUIDE

- 17 -
PREVENTIVE MAINTENANCE AND INSPECTIONS
NOTE: The safety level of the equipment can only be maintained if it is examined regularly for damage and wear.
Daily:
· Cleaning of upholstery.
Regularly:
· Clean surfaces on the frames and tubes from dust and dirt.
· Check that all bolts between parts, walls and floors are properly tightened, according to
recommendations.
· Check equipment for sharp edges. Replace parts with sharp edges.
See also www.eleiko.com.
SPARE PARTS AND SERVICE
Contact Eleiko for spare parts and service:
Eleiko Group AB | Klastorpsvägen 18 | SE-302 62 HALMSTAD | Sweden
E-mail: [email protected] | Phone: [phone]
WARRANTY
All products manufactured by ELEIKO are warranted to the original purchaser to be free from defects in
workmanship and / or materials under normal use or service as follows:
· 10 years on structural frame welds (NOT on moving parts)
· 1 year on upholstery
Normal wear and tear do not fall under the 10-year warranty.
CARE AND MAINTENANCE

Eleiko Group AB | Klastorpsvägen 18 | SE-302 62 HALMSTAD | Sweden
E-mail: [email protected] | Phone: [phone]
www.eleiko.com
rev. 2105