elint FCAM3000SMART User manual
FCAM3000SMART
Note : These instructions assume you are replacing an existing floodlight and/or have
a junction box where Floodlight Cam can be mounted. If you don’t have a junction box,
you’ll need to hire a certify electrician to install one.
SHUT POWER OFF AT
THE ELECTRICAL BOX
If you don’t know where your breaker is or
how to turn off power to your floodlight
circuit, consult with a licensed electrician.
Note: Only use this part
when installing with
Exterior Electrical
junction boxes
1pc Metal
bracket
adapter
PARTS INCLUDED:
REQUIRED TOOLS
(NOT INCLUDED)
2X external
J-box screws.
3/16 size
2pcs External
J-box Screws.
8X32 size
1pc Mounting
Cross Bar
1pc Safety
Wire
2pcs Quick
Connectors
1pc Flood
Ligth Camera
FCAM3000SMART
HOW EVERYTHING GOES TOGETHER:
Installation Option #1: Flush-mount Junction Box
`
Head Lights
PIR Sensor
Microphone
Camera Lens
Hot Wire
Deco nuts &
rubber
washers
Safety Wire
& hook
Quick Connector
Mounting
Cross Bar
Mounting
Screws
LED Indicator Light
Neutral
Wire
FCAM3000SMART
Installation Option #2: Exterior Junction Box Installation
Head Lights
Quick Connector
Mounting
Screws
Exterior J-box
(NOT INCLUDED)
Camera Lens
Mounting
Cross Bar
Safety Wire
& hook
Deco nuts &
rubber washers
Metal bracket (For
External J-box Only)
LED Indicator
Light
Microphone
PIR Sensor
Black/Hot
Wire
White/Neutral
Wire
FCAM3000SMART
Bring the PIR sensor down 90°.
Rotate the camera head to the
right 90°
For best performance, the Motion Sensor should be located parallel to the ground. The motion sensor is optimized to detect
a human-like object up to 32fts at the height of 9ft above height.
MOTION SENSOR AND CAMERA POSITION
9ft
32ft
PARALLEL TO GROUND
BEFORE INSTALLING
Floodlight Cam ships with the camera upside down on the fixture. Ensure to rotate the camera head so that the
PIR sensor is parallel to the ground.
Bring the camera head to the front.
FCAM3000SMART
FLUSH MOUNT JUNTION-BOX INSTRUCTION
NOTE: for this installation
method you DO-NOT need
the round metal Bracket
1. INSTALLING THE CROSS-BAR BRACKET
•Install mounting cross bracket to the junction box using J-box mounting screws.
2. HANG THE FLOODLIGHT FOR EASY
CONNECTION
•Use the provided safety wire and hook to
hang the Floodlight Camera from the
mounting cross bracket.
FCAM3000SMART
6. TURN POWER ON
Restore power at the electrical
breaker box.
3. CONNECT THE POWER LINES.
•Connect the Hot/line wire from the
junction box to the black wire from
the floodlight camera using the
provided connector. Open the
clamping unit from the connector
and close it once the wire is fully
inserted.
•Connect the Neutral wire from the
junction box to the white from the
floodlight camera using the provided
connector. Open the clamping unit
from the connector and close it once
the wire is fully inserted.
•Connect the ground wire to the
green ground screw on the bracket.
Note: the ground wire only goes to the metal
crossbar. The fixture does not need to be
ground.
4. PLACE THE FLOODLIGHT CAMERA
ON THE CROSSBAR
•Carefully push all the wires through the
openings.
•Align the mounting post with the holes on
Floodlight Camera and press together.
•Install rubber washer and deco nuts to
secure the fixture. Tight firmly using your
hand.
5. APPLY SILICONE
•Add silicone sealant around the canopy
between the metal plate and J-box as well as
the metal plate and canopy. This will prevent
moisture from getting to the wiring
compartment.
FCAM3000SMART
EXTERNAL JUNCTION-BOX INSTALLATION
Note: for this installation
method you need the round
metal Bracket and 3/16 screws
1. INSTALLING MOUNTING CROSSBAR AND METAL BRACKET ADAPTER:
•Using the exterior J-box mounting screws, 3/16 x 0.5in (shorter screw) , install mounting crossbar and
metal bracket adapter to the junction.
2. HANG FLOODLIGHT FOR EASY
CONNECTION
•Use the provided safety wire and clip to hang
the Floodlight Camera from the mounting
cross bracket.
FCAM3000SMART
6. TURN POWER ON
Restore power at the electrical
breaker box.
3. CONNECT THE POWER LINES.
•Connect the Hot/line wire from the
junction box to the black wire from the
floodlight camera using the provided
connector. Open the clamping unit
from the connector and close it once the
wire is fully inserted.
•Connect the Neutral wire from the
junction box to the white from the
floodlight camera using the provided
connector. Open the clamping unit
from the connector and close it once the
wire is fully inserted.
•Connect the ground wire to the green
ground screw on the bracket.
Note: the ground wire only goes to the metal
crossbar. The fixture does not need to be
ground.
4. PLACE THE FLOODLIGHT CAMERA ON
THE CROSSBAR
•Carefully push all the wires through the
openings.
•Align the mounting post with the holes on
Floodlight Camera and press together.
•Install rubber washer and deco nuts to secure
the fixture. Tight firmly using your hand.
5. APPLY SILICONE
•Add silicone sealant around the canopy between
the metal plate and J-box as well as the metal plate
and canopy. This will prevent moisture from
getting to the wiring compartment.
FCAM3000SMART
Warnings:
1. This product may represent a possible shock or fire hazard if improperly installed.
2. The product should be installed following the owner’s manual, electrical codes, and/or the current
National Electric Code (NEC).
3. Use only UL or IEC approved wire for input/output connections.
4. Use only on 120-volt 60Hz circuits.
5. Do not use with dimmers.
6. RISK OF SHOCK: ensure always remember to turn Off the Power from the electrical panel box before you
install the fixture.
7. Before installing the security camera fixture, review thoroughly this installation manual. Consult a
qualified electrician If you do not have sufficient experience.
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV
technician for help. Any modifications to this product will void the product warranty and could void the user’s
authority to operate the equipment.
Table of contents
