DELTA GROUP Vivotek FD9391-EHTV-v2 User manual

User’s Manual
9MP • Outdoor • IP66 • IK10 • Day & Night
WDR Pro • Smart Stream III • 30M Smart IR
Fixed Dome Network Camera
FD9391-EHTV-v2
FD9365-EHTV-v2
Rev. 1.0

VIVOTEK
2 - User's Manual
Table of Contents
Overview ....................................................................................................................................................................3
Revision History ..................................................................................................................................................... 4
Read Before Use.................................................................................................................................................... 4
Package Contents .................................................................................................................................................. 5
Symbols and Statements in this Document............................................................................................................ 5
Physical Description .............................................................................................................................................. 8
Hardware Installation ........................................................................................................................................... 10
Software Installation ............................................................................................................................................. 28
Network Deployment ............................................................................................................................................ 33
Ready to Use........................................................................................................................................................ 34
Accessing the Network Camera ...........................................................................................................................37
Using Web Browsers............................................................................................................................................ 37
Using RTSP Players............................................................................................................................................. 40
Using 3GPP-compatible Mobile Devices.............................................................................................................. 41
Using VIVOTEK Recording Software ................................................................................................................... 42
Main Page................................................................................................................................................................43
Client Settings .........................................................................................................................................................48
Conguration...........................................................................................................................................................53
System > General settings ................................................................................................................................... 54
System > Homepage layout ................................................................................................................................ 57
System > Logs ..................................................................................................................................................... 60
System > Parameters .......................................................................................................................................... 63
System > Maintenance......................................................................................................................................... 64
Media > Image ................................................................................................................................................... 67
Media > Video ...................................................................................................................................................... 83
Media > Video ...................................................................................................................................................... 84
Media > Audio....................................................................................................................................................... 93
Media proles ....................................................................................................................................................... 95
Network > General settings.................................................................................................................................. 96
Network > Streaming protocols ........................................................................................................................ 103
Network > SNMP (Simple Network Management Protocol)....................................................... 113
Network > FTP ................................................................................................................................................... 114
Bonjour ............................................................................................................................................................... 115
Security > User accounts ................................................................................................................................... 116
Security > HTTPS (Hypertext Transfer Protocol over SSL) ..................................................................... 118
Security > Access List ...................................................................................................................................... 125
PTZ > PTZ settings ............................................................................................................................................ 131
Event > Event settings........................................................................................................................................ 135
Applications > Motion detection.......................................................................................................................... 152
Applications > Smart VCA.................................................................................................................................. 153
Applications > DI and DO ................................................................................................................................. 154
Applications > Tampering detection ................................................................................................................... 155
Applications > Audio detection ......................................................................................................................... 156
Applications > Shock detection ......................................................................................................................... 158

VIVOTEK
User's Manual - 3
Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform) ... 159
Recording > Recording settings .............................................................................................................. 162
Storage ....................................................................................................................................................167
Storage > NAS management ................................................................................................................... 168
Storage > Content management .............................................................................................................. 170
Appendix .................................................................................................................................................... 173
URL Commands for the Network Camera................................................................................................ 173
Technology License Notice....................................................................................................................... 448
Electromagnetic Compatibility (EMC)....................................................................................................... 449
Overview
The is an outdoor xed dome network camera capable of
9MP at 30 fps. With the VIVOTEK WDR Pro technology, the camera series is capable of
capturing the highest quality images in both low light and high contrast environments.
The onboard IR can provide illumination in total darkness. With the Smart IR feature, the
rmware automatically adjusts the IR intensity for objects that came too close, in order to
avoid over-exposure.
The cameras support WDR function at the effectiveness of up to 120dB. These models
support local video stroage on the MicroSD cards if network service should be interrupted.
The cameras also come with congurable motion detection and tampering detection with
up to 5 privacy mask areas.

VIVOTEK
4 - User's Manual
Read Before Use
The use of surveillance devices may be prohibited by law in your country. The Network Camera
is not only a high-performance web-ready camera but can also be part of a exible surveillance
system. It is the user’s responsibility to ensure that the operation of such devices is legal before
installing this unit for its intended use.
It is important to first verify that all contents received are complete according to the Package
Contents listed below. Take note of the warnings in the Quick Installation Guide before the Network
Camera is installed; then carefully read and follow the instructions in the Installation chapter to
avoid damage due to faulty assembly and installation. This also ensures the product is used
properly as intended.
The Network Camera is a network device and its use should be straightforward for those who
have basic networking knowledge. It is designed for various applications including video sharing,
general security/surveillance, etc. The Configuration chapter suggests ways to best utilize the
Network Camera and ensure proper operations. For creative and professional developers, the URL
Commands of the Network Camera section serves as a helpful reference to customizing existing
homepages or integrating with the current web server.
Revision History
■ Rev. 1.0: Initial release.
IMPORTANT:
1. The product must be installed and protected in a location that is not easily accessible,
and is away from impacts or heavy vibration. For example, at the location where the
surveillance cameras are looking down or installed at high positions such as on a wall,
or at least 3 meters above the ground.
2. The camera should be installed at least 10 centimeters away from the eave of a building.
3. If powered by a power adapter, the adapter should be properly grounded.
4. Maintenance and repair work must always be carried out by qualified technical
personnel.
5. Disconnect power from the unit when performing a maintenance task.
6. Please contact VIVOTEK's certied dealers for power adapters.

VIVOTEK
User's Manual - 5
Symbols and Statements in this Document
i
INFORMATION: provides important messages or advices that might help prevent
inconvenient or problem situations.
NOTE: Notices provide guidance or advices that are related to the functional integrity of
the machine.
Tips: Tips are useful information that helps enhance or facilitae an installation, function,
or process.
WARNING: or IMPORTANT:: These statements indicate situations that can be
dangerous or hazardous to the machine or you.
Electrical Hazard: This statement appears when high voltage electrical hazards might
occur to an operator.
WARNING:
1. IR lights emit from this product.
2. Use appropriate shielding or eye protection.
Package Contents
■ FD9167-HT-v2 or FD9367-EHTV-v2
■ Screw pack, sun shield (the FD9167 comes without the sun shield), side routing bracket,
penetration cap, I/O combo cable.
■ Alignment sticker.
■ Quick Installation Guide.
■ T20 wrench.
IMPORTANT:
1. The camera is only to be connected to PoE networks without routing to outside plants.
2. For PoE connection, use only UL listed I.T.E. with PoE output.
1. La caméra ne doit être raccordée qu’à des réseaux PoE, sans routage vers des
installations extérieures.
2. Pour les raccordements PoE, utilisez uniquement un équipement de TI homologué UL,
avec une sortie PoE.
Use the camera only with a DC power supply that is UL listed, and limited power source
(LPS) certied. The power supply should bear the UL listed and LPS marks. The power
supply should also meet any safety and compliance requirements for the country of use.
n’utilisez la caméra qu’avec un bloc d’alimentation CC homologué UL, ainsi qu’avec
une alimentation limitée (LPS) certiée. Le bloc d’alimentation doit porter les indications
d'homologation UL et LPS. Il doit également répondre aux exigences en matière de
sécurité et de conformité relatives au pays d’utilisation.

VIVOTEK
6 - User's Manual
NOTE:
Camera Hardware Preventative Maintenance:
1. Visual inspection of all major components including accessories, cabling and
connections where accessible for signs of deterioration or damage.
2. Check and clean cameras, lenses and housings inside and out as needed.
• Please do not scratch, damage, or leave ngerprints on the dome/front cover and/or
lens because this may decrease image quality.
• For general cleaning of dirty areas, it is suggested to use compressed air to remove
dust and/or other debris in order not to damage the on-board components.
• In order to clean oil stains, it is recommended to use a spray-type decomposing cleaner
(absolutely avoid reciprocating wipes on the surface). After the oil has decomposed,
spray it with water, dry with air, and/or absorb water with a cotton cloth or a soft cloth
(dab, please avoid wiping).
• Do not use harsh detergents, gasoline, benzene or acetone, etc. to clean as they may
deform or cause damage to the product. Also, excessive cleaning could damage the
surface.
3. Check images for correct field of view (pan, tilt and zoom focus) and adjust as
necessary.
4. Check and replace the Micro SD memory card as needed.
• Stop edge recording before removing the Micro SD memory card.
• Make sure that the Micro SD memory card is right side up and do not insert it with
force, otherwise it may be damaged.
• When it is raining or the humidity is high, insertion or ejection of the Micro SD memory
card is not recommended.
5. Disassembly of the dome/front cover carries the risk of internal dew condensation, so
please remember to replace the desiccant bags on the inside of the cameras before
reassembly.
6. Check that the camera view has not been blocked by obstacles and that you can see
the property perimeter clearly.
7. Make sure the interiors of cameras and accessories, like mounting kits and/or
enclosures, are clean and dry.
8. Make sure cameras are securely attached to the wall/ceiling/mounting kits.
IMPORTANT:
1. Please contact VIVOTEK's certied dealers for power adapters.
2. Installation and maintenance service should only be performed by qualied technicians.
3. If powered by a power adapter, the adapter should be properly grounded.

VIVOTEK
User's Manual - 7
IMPORTANT:
For some customers who already have their own web site or web control application, the
Network Camera/Video Server can be easily integrated through URL syntax. This section
specifies the external HTTP-based application programming interface. The HTTP-based
camera interface provides the functionality to request a single image, control camera
functions (PTZ, output relay etc.), and get and set internal parameter values. The image
and CGI-requests are handled by the built-in Web server.
• To send URL commands in the address bar of your web browser, please remember to
disable the Cross-Site Request Forgery (CSRF) protection in Conguration > Security
> Miscellaneous.
• For up-to-date documentation of URL commands, please go to VIVOTEK’s website,
register an account with a business mail address and submit for authorization for SDK
in Support > Downloads > SDK.
• For any further technical support, please contact our technical support department.

VIVOTEK
8 - User's Manual
Dome cover
Bottom routing lid
Outer View
Inner View
Physical Description
MicroSD card slot
Reset button
Lens IR LEDs
Sun shield
Microphone
LEDs
Ethernet
port
Cable clip
Connector for I/O
combo
USB for WiFi dongle
I/O extension kit

VIVOTEK
User's Manual - 9
Some of the su󰀩x syntax used in model naming are listed below:
E w/ heater for extreme weather
Fx Focal length w/ number
T w/ Remote focus lens
R w/ PoE repeater
H w/ High Dynamic Range functionality
NOTE:
IMPORTANT:
The equipment comes with a RTC battery. Note the following:
• Replacement of a battery with an incorrect type that can defeat a safeguard (for
example, in the case of some lithium battery types);
• Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion;
• Leaving a battery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of ammable liquid or gas; and
• A battery subjected to extremely low aire pressure that may result in an explosion or the
leakage of ammale liquid or gas.
• CAUTION: Risk of re or explosion if the battery is replaced by an incorrect type.
Consumption & Power Input
FD9391-EHTV-v2 FD9365-EHTV-v2
PoE 802.3at Class 4 - 42V/0.34A 14.28W,
57V/0.25A 14.25W (PoE midspan or endspan)
PoE 802.3at Class 4 - 42V/0.31A 13.02W, 57V/0.23A
13.11W (PoE midspan or endspan)
DC 12V – 14.40W 1.20A
AC 24V – 11.64W 1.10A
DC 12V – 14.00W 1.16A
AC 24V – 10.79W 1.00A

VIVOTEK
10 - User's Manual
Hardware Installation
0002D10766AD
XXXXXX
1.Jot down the camera's MAC address for later reference.
2.Open the top cover by loosening the T20 anti-tamper screws.

VIVOTEK
User's Manual - 11
3.Disassemble the camera from its base plate by pulling the retention clip up and turning
the camera counter-clockwise.
Pull and Turn
1
2
4.Use the A holes on the base plate to install the base plate to wall or ceiling.
A holes

VIVOTEK
12 - User's Manual
B
If you prefer routing cables through a conduit pipe, refer to the Installation option B.
Use the alignment sticker to drill mounting holes and a routing hole on a wall or ceiling.

VIVOTEK
User's Manual - 13
5.Remove the silicon seal from the camera.
5 ~ 8mm
6.Remove the tip of the silicon seal. Insert the RJ45 connector of your Ethernet cable into
the penetration cap.

VIVOTEK
14 - User's Manual
7.Insert and pass the cable through the silicon seal.
If grommets are damaged, replace them with new ones.
8.Install the silicon seal to the original opening from the
bottom of the camera. .

VIVOTEK
User's Manual - 15
9.The I/O combo cable comes with a pre-installed seal. Install the cable to the opening and
place I/O wires in the cable clip. Note the orientation of the I/O pin headers.
Connect the I/O pin headers and the Ethernet connector to the camera.
10. When installing the silicon grommet, make sure the cable is slightly pulled back to the
outside. Do not leave the rim of the seal jammed in the inside of the seal.
CONN 2 6 pin
CONN 1 10 pin
Tabs
DI-: Yellow
DI1+: Blue
DO1-: Orange
DO+(12V): Brown
DI-: Green
DI2+: White
DO2-: Purple
DO+(12V): Gray

VIVOTEK
16 - User's Manual
21
11. If preferred, install a MicroSD card to the camera. You can connect a WiFi dongle to the
camera's micro USB port for an onsite adjustment of imaging and the shooting direction.
You can use a notebook to connect the camera at the installation site.
Refer to Step 21.
icro
icro
DI-: Yellow
DI1+: Blue
DO1-: Orange
DO+(12V): Brown
A
Extension I/O kit
12. Below are the pinouts of the I/O combo cable. If you prefer more audio, DC, and I/
O connections, you can purchase and install an extension kit. Refer to the installation
option A section for more information.
Micro B
converter
WiFi dongle
64 GB
10
I
1

VIVOTEK
User's Manual - 17
DI/DO Diagram
DI-
DO+
DI+
DO-
Switch
External Device
External DC power
Dry contact with external DC power source to supply a relay. Dry contact is the safest connecon
to protect devices.
NC
NO
Relay
Photo
Coupler
DC
DC 0V
DC 0V
External AC power
with Protected Eart
h
AC
PE
PE
DI-
DO+
DI+
DO-
Switch
External Device
External DC power
Wet contact with external DC power source to supply a relay.
NC
NO
Relay
DC
External AC power
with Protected Earth
AC
PE
PE
DC 0V
1. The DO+ pin provides 12V output voltage, and the max. load is 50mA.
2. The max. voltage for DO- pins is 30VDC (External power).
In order to control AC devices, the above diagram can be taken in consideration. The
diagram uses a relay to control the ON/OFF condition of the AC device.
3. An external relay can be triggered by using DO+ or by an external power source,
depending on the type of relay you use.
4. In case of using an individual relay (instead of using a relay module), for protection
against voltage or current spikes, a transient voltage suppression diode must be
connected in parallel with the inductive load.

VIVOTEK
18 - User's Manual
DI-
DO+
DI+
DO-
Switch
External Device
Dry contact and using camera’s DO+ to supply a relay.
NC
NO
Relay
AC
External AC power
with Protected Eart
h
PE
PE

VIVOTEK
User's Manual - 19
Cable molding
Layer - Self-fusing tape
or electric tape
2cm
1. Stretch the waterproof tape by twice its length and
wind around the cables.
2. The tape should overlap the cable joints by 20mm.
3. All connectors, whether they are used or not,
should be waterproof.
13. All cabling joints on the outside of the camera must be properly sealed for
waterproong.
1
18 AWG min.
3.5mm screw mm.
Green & Yellow wires
2
Crimping plier
Remove seal
* Use knurled washers
14. Remove the seal on the dehumidier breathe hole from the back of the camera. Use a
crimping plier to connect a grounding wire to the ground screw.

VIVOTEK
20 - User's Manual
15. Assemble the camera with its base plate. Lower the camera with its protruding tab into
the opening on the side of the groove.
16. Slide the camera counter-clockwise until the camera is snatched into place by the
retention clip.
Protruding
tab
Protruding
tab
Groove
Groove
opening
Protruding
tab
Groove