Elkay MPW200 User manual

PAGE 1 98373C (Rev. B - 05/16)
MPW200
34
2
1
Elkay - www.elkay.com
Halsey Taylor - www.halseytaylor.com
To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE
INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK YOUR INSTALLATION
FOR COMPLIANCE WITH PLUMBING, ELECTRICAL AND OTHER APPLICABLE CODES.
After installation, keep these instructions for future reference.
IMPORTANT
ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON
Mounting Plate Instructions
Model MPW200
Parts List
Refer to the illustration to make sure you receive all mounting plate parts. If any parts are missing, please
contact our Customer Service at 1.800.476.4106.
PART NO. DESCRIPTION
28793C
70020C
75541C
75708C
Mounting Plate
Hex Nut 5/16-18
Flat Washer .339/.359ID
Threaded Rod 5/16-18 x 6 In.
1
2
3
4
ITEM NO. QTY.
1
32
36
8
INSTALLER

PAGE 298373C (Rev. - B 08/16)
MPW200
Elkay - www.elkay.com
Halsey Taylor - www.halseytaylor.com
MTG. HOLES FOR
THREADED RODS
MTG. HOLES FOR
THREADED RODS
MTG. HOLES FOR
THREADED RODS
HRF Series, SoftSides®,
HDFF Series
Note: Standard conguration (High/Low) shown
in (Fig. 1). For reverse conguration below,
mounting plate can be ipped to mount units in
the (Low/High) conguration.
OVL II™ Series
Note: Standard conguration (High/Low) shown
in (Fig. 2). For reverse conguration below,
mounting plate can be ipped to mount units in
the (Low/High) conguration.
SwirlFlo®Series
Note: Standard conguration (High/Low) shown
in (Fig 3). For reverse conguration below,
mounting plate can be ipped to mount units in
the (Low/High) conguration.
This Mounting Plate System is designed for use with the following models:
Bi-Level HDFF Series, Bi-Level HRF Series, Bi-Level SoftSides®,
Bi-Level OVL II™ Series and Bi-Level SwirlFlo®.
Fig. 1
Standard Conguration
Fig. 2
Standard Conguration
Fig. 3
Standard Conguration

PAGE 3 98373C (Rev. B - 05/16)
MPW200
Elkay - www.elkay.com
Halsey Taylor - www.halseytaylor.com
FOUNTAIN
FOUNTAIN
MTG. PLATE
FINISHED WALL
FINISHED FLOOR
16"
406mm
32"
813mm
MTG. HOLES
MTG. HOLES
FINISHED WALL
27"
686mm
*
26 9/16"
675mm
5/8"
16mm
12 3/4"
324mm
HDFF Series/HRF Series/SoftSides®
When mounting plate directly to wall studs please refer to the
diagrams shown below. For electrical, waste, and water supply
locations please refer to the Installation/Owners Manual for the specic unit.
* ADA REQUIREMENT
NOTE - AFTER INSTALLATION, THREADED RODS MAY NEED TO BE TRIMMED.
3/8" MTG. HARDWARE
(SUPPLIED BY OTHERS)
MTG. HARDWARE
(SUPPLIED)

PAGE 498373C (Rev. - B 08/16)
MPW200
Elkay - www.elkay.com
Halsey Taylor - www.halseytaylor.com
4 5/8"
118mm
SEE DETAIL A
FINISHED WALL
FINISHED FLOOR
32"
813mm
MTG. HOLES
MTG. HOLES
MTG. PLATE
INSTALLED BEHIND
FINISHED WALL
**
27"
686mm
*
U-BOLTS ARE INCLUDED WITH
ML100 (SUPPORT COLUMNS)
26 9/16"
675mm
5/8"
16mm
12 3/4"
324mm
DETAIL A
HDFF Series/HRF Series/SoftSides®
When using mounting plate with ML100 (Support Columns) please refer to the
diagrams shown below. For electrical, waste, and water supply locations
please refer to the Installation/Owners Manual for the specic unit.
* ADA REQUIREMENT
** WITH STANDARD STUD LENGTH OF 6 INCHES.
NOTE - AFTER INSTALLATION, U-BOLTS AND THREADED RODS MAY NEED TO BE TRIMMED.

PAGE 5 98373C (Rev. B - 05/16)
MPW200
Elkay - www.elkay.com
Halsey Taylor - www.halseytaylor.com
FOUNTAIN
FOUNTAIN
16"
406mm
32"
813mm
MTG. HOLES
MTG. HOLES
FINISHED WALL
MTG. PLATE
FINISHED WALL
27"
686mm
*
5/8"
16mm
12 3/4"
324mm
24 15/16"
634mm
FINISHED FLOOR
OVL II™ Series
When mounting plate directly to wall studs please refer to the
diagrams shown below. For electrical, waste, and water supply
locations please refer to the Installation/Owners Manual for the specic unit.
* ADA REQUIREMENT
NOTE - AFTER INSTALLATION, THREADED RODS MAY NEED TO BE TRIMMED.
3/8" MTG. HARDWARE
(SUPPLIED BY OTHERS)

PAGE 698373C (Rev. - B 08/16)
MPW200
Elkay - www.elkay.com
Halsey Taylor - www.halseytaylor.com
32"
813mm
FINISHED FLOOR
MTG. HOLES
MTG. HOLES
MTG. PLATE
INSTALLED BEHIND
FINISHED WALL
SEE DETAIL A
FINISHED WALL
45/8"
118mm
**
27"
686mm
*
U-BOLTS ARE INCLUDED WITH
ML100 (SUPPORT COLUMNS)
24 15/16"
634mm
5/8"
16mm
12 3/4"
324mm
DETAIL A
OVL II™ Series
When using mounting plate with ML100 (Support Columns) please refer to the
diagrams shown below. For electrical, waste, and water supply
locations please refer to the Installation/Owners Manual for the specic unit.
* ADA REQUIREMENT
** WITH STANDARD STUD LENGTH OF 6 INCHES.
NOTE - AFTER INSTALLATION, U-BOLTS AND THREADED RODS MAY NEED TO BE TRIMMED.

PAGE 7 98373C (Rev. B - 05/16)
MPW200
Elkay - www.elkay.com
Halsey Taylor - www.halseytaylor.com
FOUNTAIN FOUNTAIN
FINISHED WALL
MTG. PLATE
FINISHED FLOOR
16"
406mm
32"
813mm
MTG. HOLES
MTG. HOLES
FINISHED WALL
27"
686mm
*
26 9/16"
675mm
5/8"
16mm
12 3/4"
324mm
SwirlFlo®Series
When mounting plate directly to wall studs please refer to the
diagrams shown below. For electrical, waste, and water supply
locations please refer to the Installation/Owners Manual for the specic unit.
* ADA REQUIREMENT
NOTE - AFTER INSTALLATION, THREADED RODS MAY NEED TO BE TRIMMED.
3/8" MTG. HARDWARE
(SUPPLIED BY OTHERS)

PAGE 898373C (Rev. - B 08/16)
MPW200
Elkay - www.elkay.com
Halsey Taylor - www.halseytaylor.com
4 5/8"
118mm
32"
813mm
MTG. HOLES
MTG. HOLES
MTG. PLATE
INSTALLED BEHIND
FINISHED WALL
FINISHED WALL
FINISHED FLOOR
SEE DETAIL A
**
27"
686mm
*
U-BOLTS AREI NCLUDED WITH
ML100( SUPPORT COLUMNS)
26 9/16"
675mm
5/8"
16mm
12 3/4"
324mm
DETAIL A
SwirlFlo®Series
When using mounting plate with ML100 (Support Columns) please refer to the
diagrams shown below. For electrical, waste, and water supply
locations please refer to the Installation/Owners Manual for the specic unit.
* ADA REQUIREMENT
** WITH STANDARD STUD LENGTH OF 6 INCHES.
NOTE - AFTER INSTALLATION, U-BOLTS AND THREADED RODS MAY NEED TO BE TRIMMED.
For Technical Service, please contact us at 1.800.476.4106