Elmuz M-1002 User manual

Professional mixer console
M-1002
M-1602
M-2202

+6
+3
0
-3
-6
-10
-20
-30
-
MIC
PEAK
1
1
010
LINE
INSERT
060
L5 5R
-15 +15
-15 +15
-15 +15
010
010
1
GAIN
HIGH
MID
LOW
AUX1
AUX2
EFF
PAN
MAIN
SUB
PFL
2
3
4
5
6
7
8
9
10
20
0
0
0
5
5
5
0
1
Professional mixer
1 XLR Mic. Inuput
2 LINE INPUT
3 INSERT
4GAIN
5 HIGH FREQUENCY CONTROL
6 MID FREQUENCY CONTROL
7 LOW FREQUENCY CONTROL
8 AUX 1
9 AUX 2
10 EFFECT
Balanced XLR Mic. Connector, power supplied by +48V
phantom power, can accept all kinds of balanced or
unbalanced Mic. Signal.
1/4 balanced connector can accept balanced or
unbalanced sound signal, such as keyboard or other musical
instrucpments.
Tip=Signal+ Ring=Signal- Hole=Sleeve
Signal input, Microphone signal output
Enable the gain of microphone from -60dB to -20dB by
adjusting this control.
You can increase or decrease 15dB at 12KHz by adjusting
this knob.
You can increase or decrease 15dB at 3.5KHz by adjusting
this knob.
You can increase or decrease 15dB at 350 Khz by adjusting
this knob.
The level of the monitor aux output channel can be adjusted
by this knob.
The level of the monitor aux output channel can be adjusted
by this knob.
To get different delayed effect, adjust this control to change
the input level.

+6
+3
0
-3
-6
-10
-20
-30
-
MIC
PEAK
1
1
010
1
2
3
LINE
INSERT
060
L5 5R
-15 +15
-15 +15
-15 +15
010
010
1
GAIN
HIGH
MID
LOW
AUX1
AUX2
EFF
PAN
MAIN
SUB
1
PFL
2
3
11
11
12
13
15
13
14
13
16
0
5
5
5
0
0
0
20
2
11 PAN
12 PEAK
13 MAIN
14 SUB
15 CHANNEL ADJUSTMENT FADER
16 PFL
Signals can be distributed to right and left generatrix
unequally by adjusting this control. When the knob is in
the middle, the signals are distributed equally to both right
and left lines. When the knob is on the left, the signals to
the right channel will increase, while to the left, decrease.
When the knob is on the right, the signals to the left
channel will increase, while to the right, decrease. When
the knob is on the right end, left channel will be off. While
on the left end, the right will be off.
The peak level indicator will be light when the clip level
exceeds +10dB.
Press this key to let the signal output from main channel.
Press SUB channel control for signal output from SUB
signal line.
For performance harmony, adjust this fader to control
total channel signals from MAIN and SUB.
You can monitor the output condition from this channel by
headphone after pressing this control.
Professional mixer

1 STEREO/MONO
2 LINE INPUT
3 HIGH FREQUENCY CONTROL
4 LOW FREQUENCY CONTROL
5 AUX1 AUX2
6 EFFECT
7PAN
8 PEAK
9MAIN
10 SUB
Press the knob, input signals will be decreased -10dB.
You can increase or decrease 15dB at 12KHz by adjusting
this knob.
You can increase or decrease 15dB at 350Hz by adjusting
this knob.
The level of aux output channel can be controlled and
monitored by adjusting this knob.
To get different delayed effects, adjust this control to
change the input level.
Signals can be distributed to right and left generatrix
unequally by adjusting this control. When the knob is in
the middle, the signals are distributed equally to both
right and left lines. When the knob is on the left, the
signals to the right channel will increase, while to the
left, decrease. When the knob is on the right, the signals
to the left channel will increase, while to the right,
decrease. When the knob is on the right end, left channel
will be off. While on the left end, the right will be off.
The peak level indicator will lights up when the clip level
exceeds +10dB.
Press main channel control for main volume signal
output.
Press SUB channel control for signal output from SUB
signal line.
Lotus connector and 1/4 connector are right and left stereo line input
that are used for balanced high level input signals. If the signals are
input to input connector of left channel, output level of signal output will
be transited to the left or right signal; if the signals are input to the right
input connector, the output level will only be transited to the right
channel. If the signals from each channel are input to the input
connectors of right and left channels, both output channels will be stereo
output.
+6
+3
0
-3
-6
-10
-20
-30
-
STEREO
PEAK
1
7/8
010
MONO
R
L5 5R
-15 +15
-15 +15
010
010
7/8
HIGH
LOW
AUX1
AUX2
EFF
PAN
MAIN
SUB
PFL
2
4
7
11
8
9
13
10
6
5
INPUT
3
-10
+4
8
7
L
R
L
0
0
5
5
5
0
Professional mixer
3

+6
+3
0
-3
-6
-10
-20
-30
-
STEREO
PEAK
7/8
010
MONO
R
L5 5R
-15 +15
-15 +15
010
010
7/8
HIGH
LOW
AUX1
AUX2
EFF
PAN
MAIN
SUB
PFL
11
INPUT -10
+4
8
7
L
R
L
11
13
12
5
5
5
5
0
0
4
11 CHANNEL ADJUSTMENT FADER
12 PFL
For performance harmony, adjust this fader to
control total channel signals from MAIN and SUB.
You can monitor the output condition from this
channel by headphone when pressing this control.
Professional mixer