ENCHANTED FOREST 15 LAWN STAKE LIGHT SET User manual

15 LAWN STAKE LIGHT SET
ASSEMBLY INSTRUCTIONS
Item # 638725-132
Sku # 284-1044
WARNING: Risk of fire, personal injury, and electric shock.
1. Make sure light set is not connected to power before starting assembly.
2. Keep wires from being pinched or cut during assembly, installation or use. Discard product with cut wire insulation.
3. Do not press or grasp bulbs during assembly or installation.
4. Watch for bulbs that may have broken if parts shifted in transit.
5. This product is not a toy, for adult use only. It should not be played with or placed where children can reach it.
6. Make sure stakes are clear of underground sprinkler lines, underground telephone lines, and underground power lines before starting.
7. Please read all instructions and warnings included with this product before using.
TROUBLESHOOTING
If lights do not work
a. Make sure there is power to the outlet and the product is plugged in.
b. Check for missing bulbs or broken bulbs.
c. Check for loose bulbs by firmly pushing bulbs into socket.
d. Check for blown fuse in the light set plug.
e. If plugged into a GFCI outlet or GFCI protected circuit, check and reset
the GFCI to make sure it did not trip. Discard product if GFCI repeatedly trips.
ENCLOSED PARTS:
15 Ground Stakes 15 Middle Stakes 15 C12 4 Spare Bulbs 2 Spare Fuses

ASSEMBLY: Place ground stakes in ground first (use warm water or dig up area before inserting if ground is frozen or hard) followed by the middle stake then add the C-
Bulb. Plug light set into outlet. Disassemble stake parts by pulling and twisting sections at the same time.
1
2