ENHANCE SPECTRA E52 User manual

SPECTRA E52/E53
User Manual
（V1.1）

Attentions
Improper operations may damage the product structure and result in mechanical failure.
Please note the following tips.
Do not move the camera by
grabbing the head.
Move the camera by holdingthe
bottom with one or both hands.
Please do not rotate the lens and holder
manually, no matter if the camera is power on
or off. Otherwise, it may damage the camera
structure and result in failure of camera self-
check and unable to start the camera.

This manual introduces functions, installations, and operations for this PTZ camera in detail. Please read
this manual carefully before installation and use.
1. Cautions
1.1 Avoid damage to the product caused by heavy pressure, strong vibration or immersion during transportation, storage and
installation.
1.2 The housing of this product is made of organic materials. Do not expose it to any liquid, gas or solids which may corrode
the shell.
1.3 Do not expose the product to rain or moisture.
1.4 To prevent the risk of electric shock, do not open the case. Installation and maintenance should only be carried out by
qualified technicians.
1.5 Do not use the product beyond the specified temperature, humidity or power supply specifications.
1.6 Wipe it with a soft, dry cloth when cleaning the camera lens. Wipe it gently with a mild detergent if needed. Do not use
strong or corrosive detergents to avoid scratching the lens and affecting the image.
1.7 This product contains no parts which can be maintained by users themselves. Any damage caused by dismantling the
product by the user without permission will not be covered by warranty.
2. Electrical Safety
Installation and use of this product must strictly comply with local electrical safety standards.
The power supply of the product is ±12V, the max electrical current is 2A.
3. Install
Do not rotate the camera head violently, otherwise it may cause mechanical failure.
This product should be placed on a stable desktop or other horizontal surfaces. Do not install the product obliquely, otherwise
it may display an inclined image.
Ensure there are no obstacles within the rotation range of the holder.
Do not power on before complete installation.
4. Magnetic Interference
Electromagnetic fields at specific frequencies may affect the video image. This product is Class A. It may cause
radio interference in a household application. Appropriate measure is required.

Content
1. Camera Installation 4
1.1 Camera Introduction 4
1.2 Interfaces and Connection 5
1.3 Mounting Brackets 5
2. Product Overview 9
2.1 Model 9
2.2 Dimension 10
2.3 Accessory 10
2.4 RS-232 Interface 11
2.5 Rotary DIP Switch 12
2.6 Main Features 12
2.7 Technical Parameter 13
3. Remote Control 15
3.1 Match Code for Wireless Remote Control 15
3.2 Keys Introduction for IR Remote Control 16
3.3 Menu Introduction 18
4. Network Configuration 20
4.1 Network Connection 20
4.2 IE Login 21
4.3 Streaming 21
4.4 Software Upgrading 23
5. Serial port communication and control 24
5.1 VISCA Protocol Return Command 24
5.2 VISCA Protocol Control Command 25
5.3 VISCA Protocol Inquiry Command 27
5.4 Pelco-D Protocol Command List 29
5.5 Pelco-P Protocol Command List 30
6. Maintenance and Troubleshooting 31
6.1 Maintenance 31
6.2 Troubleshooting 31
7. Copyright Statement 32

1. Camera Installation
1.1 Camera Introduction
1. Camera Lens
2. Camera Base
3. Remote Control Receiving Indicator
4. Infrared Receiver
5. Tripod Screw Hole
6. Screw Hole for Tripod
7. HDM Output
8. USB3.0 Output
9. SDI Output
Figure 1.1 Interface of SU Model
10. Audio Input Interface (Line-in)
11. Rotary DIP Switch
12. RS232 Control Interface (input )
13. RS232 Control Interface (output)
14. RS422 Interface (Compatible with RS485)
15. Network Interface (LAN)
16. DC12V Input Power Supply Socket
17. Power Switch
Figure 1.1 Interface of U3 Model
1. Camera Lens 10. Rotary DIP Switch
2. Camera Base 11. RS232 Control Interface (input )
3. Remote Control Receiving Indicator 12. RS232 Control Interface (output )
4. Infrared Receiver 13. RS422 Interface (Compatible with RS485)
5. Tripod Screw Hole 14. Network Interface (LAN)
6. Screw Hole for Tripod 15. DC12V Input Power Supply Socket
7. HDM Output 16. Power Switch
8. USB3.0 Output
9. Audio Input Interface (Line-in)

1.2 Interfaces and Connection
Figure 1.3 Wiring Diagram
After power on and self-warming, the camera will automatically return to the preset 0 position if it is pre-
set. The default address for the IR remote control is 1#.
If the menu restored to factory defaults, the remote control default address will restore to 1#.
1.3 Mounting Brackets
Notes:
Ceiling or wall mounting brackets can only be mounted on template and concrete wall.
For safety reason, plasterboard is not recommended.

pg. 6
1) Wall Mounting:

pg. 7

pg. 8
2) Ceiling Mounting

pg. 9

pg. 10
Product Overview
2.1 Model
Model No. —XXX—XXX—XX IR ---IR Remote Controller
WR---Wireless Remote Controller
SU---SDI、HDMI、USB3.0 Interface
U3--- HDMI、USB3.0 Interface
20---20X Optical Zoom Lens
30---30X Optical Zoom Lens
Figure 2.1 Product Model
2.2 Dimension

pg. 11
2.3 Accessory Figure 2.2 Product Dimension
Please check below standard and optional accessories when unpacking the box.
Standard Accessory
Optional Accessory
Power adapter
Wireless Remote Control
IR Remote Control
Ceiling Mount
RS232 Cable
Wall Mount
User Manual
USB3.0 Cable
2.4 RS-232 Interface
1). RS-232 Interface Definition
Connection to PC or Camera Controller
Camera
WindowsDB-9
1.DTR
1.DCD
2.DSR
2.RXD
3.TXD
3.TXD
4.GND
4.DTR
5.RXD
5.GND
6.GND
6.DSR
7.IR OUT
7.RTS
8.NC
8.CTS
9.RI
2). RS232 Mini-DIN 8-pin: Port Definition
NO.
Port
Definition
1
DTR
Data Terminal Ready
2
DSR
Data Set Ready
3
TXD
Transmit Data
4
GND
Signal Ground
5
RXD
Receive Data
6
GND
Signal Ground

pg. 12
7
IR OUT
IR Commander Signal
8
NC
No Connection
3). RS232 (DB9) Port Definition
NO.
Port
Definition
1
DCD
Data Carrier Detect
2
RXD
Receive Data
3
TXD
Transmit Data
4
DTR
Data Terminal Ready
5
GND
System Ground
6
DSR
Data Set Ready
7
RTS
Request to Send
8
CTS
Clear to Send
9
RI
Ring Indicator
4). VISCA networking as shown below:
Camera cascade connection
Camera 1
Camera 2
1.DTR
1.DTR
2.DSR
2.DSR
3.TXD
3.TXD
4.GND
4.GND
5.RXD
5.RXD
6.GND
6.GND

pg. 13
2.5 Rotary DIP Switch
Dial-up
video format
Dial-up
video format
0
1080P60
8
720P30
1
1080P50
9
720P25
2
1080I60
A
1080P59.94
3
1080I50
B
1080I59.94
4
720P60
C
720P59.94
5
720P50
D
1080P29.97
6
1080P30
E
720P29.97
7
1080P25
F
video format to be set
on the menu
Note: 1. Please remember to reboot the camera to take effect when
video format is switched.
2. If switch to F, please power off and reboot to take effect.
2.6 Main Features
This series camera has perfect functions, superior performance and rich video output interfaces; Featuring with
advanced ISP processing algorithms, offering vivid and high resolution video with a strong sense of depth and
fantastic color rendition. It supports H.264/H.265 encoding which makes motion video more fluent and clear under
low bandwidth conditions.
Full HD Resolution: 1/2.8 inch high quality CMOS sensor. Resolution is up to 1920x1080 with frame rate up to
60 fps.
Multiple Optical Zoom Lens: 20X/30X optical zoom lens.
Leading Auto Focus Technology: Fast, accurate and stable auto focusing technology.
Low Noise and High SNR: Super high SNR image is achieved with low noise CMOS. Advanced 2D/3D noise
reduction technology further reduces the noise while ensuring high image clarity.
Multiple video output interfaces: HDMI, SDI, USB3.0, LAN.
8.OPEN
8. NC
7.OPEN
7.IR OUT

pg. 14
Simultaneously output audio and video signal via HDMI, SDI, USB3.0 and LAN. LAN support POE power
supply, USB3.0 support dual stream output, support YUY2, MJPEG, H.264, NV12, H.265 video code format,
SDI output could up to 100M with 1080P@60fps.
Multiple Audio/Video Compression Standards: Support H.264/H.265 video compression, up to 1920×1080
resolution 60 fps; support AAC, MP3 and G.711A audio compression, 8000,16000,32000,44100,48000 sampling
frequency.
Built-in Gravity Sensor: Support PTZ auto-flip function and easy installation.
Multiple Network Protocol: Support ONVIF, GB/T28181, RTSP, RTMP protocols; Support RTMP push mode
，easy to be connected to streaming server (Wowza,FMS); Support RTP multicast mode; Support network full
command VISCA control protocol.
Control Interface: RS422 compatible with RS485, RS232-IN, RS2323-OUT, RS232 (cascade connection) .
Multiple Control Protocol: Support VISCA, PELCO-D, PELCO-P protocols; Support automatic identification
protocols.
Quiet Pan / Tilt Movement: With high accuracy step driving motor, camera can pan / tilt extremely quiet and
smooth.
Auto sleep function: Auto sleep/wake up function with low power consumption, less than 400mw.
Multiple presets: Up to 255 presets (10 presets via remote control).
IR / Wireless Remote Control: Users can choose IR remote control or wireless remote control according to
different conditions. 2.4G wireless remote control is not affected by the angle, distance or infrared interference.
Far-end-control is also available.
Multiple Application: Online-education, Lecture Capture, Webcasting, Video conferencing, Tele-medicine,
Unified Communication, Emergency command and control systems, etc.
2.7 Technical Parameter
Model
20X
30X
Camera Parameter
Optical Zoom
20X
5.2-98mm
30X
f＝4.3-129mm
Sensor
1/2.8 inch high quality HD CMOS sensor
Effective Pixels
16: 9, 2.07 megapixel
Video Format
HDMI/SDI video format
1080P60/50/30/25, 1080I60/50, 720P60/50
USB3.0 interface video format:
Main Stream: YUY2/MJPEG/NV12/H.264/H.265:
1920×1080P30,1280×720P30,1024×576P30,960×540P30,800×448P30,720×480P30,64
0×360P30, 640×480P30,320×176P30
Sub Stream: YUY2/NV12: 640×360P30,640×480P30,320×176P30
MJPEG/H.264/H.265: 1920×1080P30,1280×720P30,
1024×576P30,960×540P30,800×448P30,720×480P30,640×360P30,
640×480P30,320×176P30
View Angle
84°(W)
20°(T)
72.5°(W)
6.3°(T)
56° (W)
3.2°(T)
65°(W)
2.34°(T)
AV
F1.8 –F2.8
F1.8 –F2.4
F1.5～F3.0
F1.6 –F4.7
Digital Zoom
10X
Minimum
Illumination
0.5Lux (F1.8, AGC ON)
DNR
2D & 3D DNR
White Balance
Auto / Manual/ One Push/ Specify color temperature

pg. 15
Focus/Aperture/
Electronic Shutter
Auto/Manual/One Push Focus
Exposure Mode
Auto/Manual/Shutter priority/Aperture priority/brightness priority
Aperture
F1.8 ～F11 CLOSE
Shutter Speed
1/25～1/10000
BLC
ON/OFF
WDR
OFF/ Dynamic level adjustment
Video Adjustment
Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma curve
SNR
≥50dB
Input/output Interface
Video Interfaces
SU Model: HDMI, SDI, LAN(POE), USB3.0(type B compatible with USB2.0) ,
RS232-IN, RS232-OUT, RS422 (compatible with RS485), A-IN, Rotary DIP
switch, DC 12V port, Power Switch
U3 Model: HDMI, LAN(POE), USB3.0(type B compatible with USB2.0) , RS232-
IN, RS232-OUT, RS422 (compatible with RS485), A-IN, Rotary DIP switch, DC
12V port, Power Switch
Video Stream
Dual stream output
Video Compression
Format
LAN Interface: H.265, H.264, Dual stream output
USB3.0 Interface: YUY2, MJPEG, H.264, NV12, H.265
Audio Input Interface
Double track 3.5mm linear input
Audio Output Interface
HDMI, SDI, LAN, USB3.0
Audio Compression
Format
AAC/MP3/G.711A
Control Interface
RS232-IN, RS232-OUT, RS422 (compatible with RS485)
Control Protocol
VISCA/Pelco-D/Pelco-P, Baud Rate: 115200/38400/9600/4800/2400bps
Power Interface
HEC3800 outlet (DC12V)
Input Voltage
DC12V±10%
Input Electric Current
Maximum: 1A
Power Consumption
Maximum: 12W
Network Protocols
RTSP, RTMP, ONVIF, GB/T28181;
Network VISCA control protocol;
Support remote upgrade, reboot and reset
USB Communication
UVC (Video)，UAC (Audio)
PTZ Parameter
Pan/Tilt Rotation
±170°, -30°～+90°
Pan Control Speed
0.1 - 100°/sec
Tilt Control Speed
0.1- 45°/sec
Preset Speed
Pan: 100°/sec, Tilt: 45°/sec
Preset Number
255 presets (10 presets via remote control)
Other Parameter
Stored Temperature
-10℃~+70℃
Storage Humidity
20%~95%
Working Temperature
-10℃~+50℃

pg. 16
Working Humidity
20%~80%
Dimension
181mmX115mmX149mm
Weight
1.15KG
Accessory
Package
Power Supply, RS232 Control Cable, USB3.0 cable, IR Remote Control, User
Manual
Optional Accessories
Ceiling / Wall Mount (Extra Cost)
3. Remote Control
3.1 Match Code for Wireless Remote Control
One to One Code Matching:
Press the "set" and "*" keys combined for 3 seconds, LED indicator will start flashing. The camera receives
the signal and power on, LED indicator will go off if code matching successfully. The camera can be
controlled by this wireless remote control only after one-to-one code pairing. Otherwise, please clear the
code matching of this remote control, or use another remote control to pair with the camera again.
If one-to-one code matching failed, the red LED light flashes for 20 seconds and then goes off. The camera
will stop the code match and turn on sleep mode; Press any key to wake up the camera and re-match the
code.
Note: After code matching successfully, please select the camera address to control it.
Clear Code:
Press the "set"and "#"keys combined for 3seconds, LED indicator starts flashing.The camera
will power off and on. The LED indicator will go off if clear code successfully.
Sleep Mode and Wake Up:
Press any key to wake up the camera from sleep mode.
3.2 Keys Introduction for IR Remote Control
1). In this manual, “press the key” means a click rather than a long-press, and a special note
will be given if a long-press for more than one second is required.
2). When a key-combination is required, do it in sequence. For example,“ 【*】+【#】+【F1】
”means press“【*】”first and then press“【#】” and last press“【F1】”.
1. Standby Key
The camera enters standby mode if long press 3s on standby key;
Long press 3s again on the standby key, the camera will self-check again and return to HOME position (If preset 0
position is set, the camera will return to preset 0 position).
2. Camera Selection
Select the camera address to control.

pg. 17
3. Focus Control
Auto: auto focus mode
Manual: manual focus mode
Focus + (near):Press【FOCUS +】key (Valid only in
manual focus mode)
Focus - (far): Press【FOCUS -】key (Valid only in
manual focus mode)
Press and hold the keys, the action of focus will keep
continue and stop as soon as the key is released.
4. Zoom Control
ZOOM +: press 【ZOOM + 】key to zoom in
ZOOM ss-: press 【ZOOM -】key to zoom out
Press and hold the keys, the action of focus will keep
continue and stop as soon as the key is released.
5. Set and Clear Presets
Set Preset: press 【SET PRESET】button, and then press
the number key 0-9 to set preset positions.
Note: 10 presets via remote control.
Call Preset: Press a number key 0-9 directly to call a
preset position.
Clear Preset: press 【CLEAR PRESET】button, and then
press the number key 0-9 to clear preset positions.
Note : press the 【# 】key three times continually to
clear all presets.
6. Pan/Tilt Control

pg. 18
Up: press Down: press
Left: press Right: press
Back to middle position: press“【HOME】”
Press and hold the up/down/left/right key, the pan/tilt
movements will keep running, from slow to fast, until it
runs to the endpoint; stop as soon as the key is released.
7. Menu Setting
【MENU】: Open / close the OSD menu
【HOME 】: Camera lens back to the middle position;
Confirm button; Enter next menu
【↑】【↓】：Choose item
【←】【→】：Modify values
【BLC ON/OFF】：Turn on or off the back light
compensation
8. Camera Remote Control Address Setting
【*】+【＃】+【F1】:Camera Address No.1
【*】+【＃】+【F2】:Camera Address No. 2
【*】+【＃】+【F3】:Camera Address No. 3
【*】+【＃】+【F4】:Camera Address No. 4

pg. 19
9. Key Combination
1) 【#】+【#】+【#】: Clear all presets
2) 【*】+【#】+【6】: Restore factory defaults
3) 【*】+【#】+【3】: Menu set to Chinese
4) 【*】+【#】+【4】: Menu set to English
5) 【*】+【#】+【9】: Flip switch
6) 【*】+【#】+Auto: Enter aging mode
7) 【#】+【*】+Auto: Exit aging mode
8) 【*】+【#】+Manual: Restore the default user name,
password, and IP address
9) 【#】+【#】+【0】: Switch the video format to 1080P60
10)【#】+【#】+【1】: Switch the video format to 1080P50
11)【#】+【#】+【2】: Switch the video format to 1080I60
12)【#】+【#】+【3】:Switch the video format to 1080I50
13)【#】+【#】+【4】: Switch the video format to 720P60
14)【#】+【#】+【5】:Switch the video format to 720P50
15)【#】+【#】+【6】: Switch the video format to 1080P30
16)【#】+【#】+【7】: Switch the video format to 1080P25
Note: If the address of former remote control is not address 1 but another one from 2, 3,
4, the corresponding camera address will restore to address 1 when all parameters are
restored to factory default. User should change the remote control address to address 1.
3.3 Menu Introduction
Note: The modification valid only if exit the menu before save and power off.
1). Menu Control
【MENU】: Enter / exit the OSD menu or return to the previous menu
【HOME】: Enter next menu
【↑】【↓】：Choose item
【←】【→】：Modify values
2). English Menu