ENJOY SJJ-7087 User manual

SJJ-7087
Rocking Massage Chair
OPERATING GUIDE

Thank you for choosing our product. In order to use the
product properly, please read the manual carefully before
using, especially the safety precautions.Please keep this
manual safe in order to have in handy.
04 05-
09
01 03-
0 086-
07-08
09
10
10
01
06
1.Product Introduction
2. Notice
3.Product component names
4.O peration Instruction
⑴ Preparation before usage
⑵ Hand Controller operation instruction
5. Cleaning and Maintenance
6.I mportance Notice
7.S elf inspection
8.R eference parameters
Contents
Rocking
Massage Chair

RockingWe develop and manufacture Model SJJ-7087
Massage Chair.We use the microcomputer chip to control the
whole system. It matches ergonomics with rocking chair
functions and features. It is a simple in operation and multi-
function exquisite massage chair. The neck kneading massage
pillow is detachable. The back massage head is vertical movable.
It has heating function as well.We equip the seat with high
frequency vibration motor.It has several modes of precise and
intelligent massage functions such as warm massage,kneading,
tapping, vibration and spot massage.It simulates artificial
massage neck,back, waist and hips comfortably.
1.Please do not use it in bathroom,kitchen,at the fountain,and
places under strong sunlight, high pressure, humidity, greasy
dirt and highly corrosive, as well as places with flammable and
explosive dust,petrol,gas,steam.,etc.
2.If you are in treatment of diseases or have any cases below,
please do not use it or follow the doctors advice.
① Pregnant woman.
② Customers vulnerable to electrical disturbance with
pacemaker, implantable cardiac defibrillator and other
medical devices.
③ Customers with breeding disorder, sepsis,fever,
paresthesia.
3.Children and people with physical and mental deficiencies ,lack
of experience and cognition must be supervised by the adults
who is responsible for their safety.
4.Children must be supervised by adults to ensure that they will
not spoil the product. In order to avoid accident, please keep
children off the chair while you are using it.
5 I. t has a heating surface, so the customers who are not sensitive to
heat must be careful in use.
6.Please do not use it when your body or hair is wet.
7.Never pull out the plug or touch the power cord, plug and socket
with a wet hand.
8.For the customers with long hair, please do not let your long hair
cove r t he mass age are a, in order to avoid accid ent al
entanglement.
9.Never insert your fingers into the gap under the massage ball to
avoid finger injury.
10.Please do not stand on it or put heavy stuff on it.
11.Please do not adjust the shins leaning angle while you are lying
on the chair in order to avoid accident.
12.Please do not sit on the hand controller or drop it.
13.Please do not excessively bent,pull,twist ,knot the power cord
and hand controller connecting wire.

14.Unauthorized repairman is not recommended to transform,
disassemble or repair the product. If any abnormal
circumstance occurs please contact our dealer promptly.
15.If fabric or casing breakage happens,please stop using it and
send it to our authorized maintenance center for exchange of
the broken parts.
16.If there is any damage at power cord, it must be exchanged by
manufacturer or its maintenance department or relevant
professional repairman.
17.Please do not use it while there is lightning,and unplug right
away.
18.It is only suitable for using the adaptor we provide. It can not be
used in other power supply mode. This adaptor can only be
used in this product only.If any damage occurs,it has to be
exchanged or repaired by our dealer or our maintenance center.
19.If any abnormal circumstance occurs,please stop using it right
away and unplug then contact our dealer's maintenance
department or relevant professional repairman.
20.When you are not using it, please turn off power switch and
unplug.
21.We apply intelligent control system.Once it is over heated,it will
initiate self-protected system and it may stop operating . If it
happens, please turn off power supply and wait for the
temperature to cool down for retrieving operation.
22.The noise during operation is caused by the massage part. It is
normal phenomenon.
We strongly suggest customers over 150KG not to use
this massage chair for safety reason.
SJJ-7087 Hand Controller

1.Please assemble the whole chair according to the assembly
drawing. Connect the neck massage pillow input line head with
its output head. Adjust the most comfortable massage pillow
height by fixing the velcro firmly.Next, connect the adaptor
output line head with DC input line head. Put the plug in the
240V socket to electrified the adaptor then the indicator light is
on in blue color.
Preparation before using
Note: please assemble it on carpet or floor to avoid scratch.

Upper button: Hold the upper button to move the massage balls
upward to a suitable position.
The whole machine power supply button:Press it once, it initiates
standby mode.Press any other buttons for the function you need.
Press again, turn off the power supply.
Neck massage button:Press it once to start neck massage and neck
heating function.The massage ball works in inward direction. Press
it again ,the massage ball works in outward direction and the neck
heating function is turn off. Press it 3rd time to turn off the
function.
Lower button: Hold the lower button to move the massage balls
upward to a suitable position.
Automatic running button:Press it once,all the default machine
functions are started.Press again , it will turn off the functions.
Hand Controller operation instruction
Auto
Neck
Heat
2.Please sit up straight,lean your back and neck on the chair .
3.Please do not stand on the hand controller.
4.Press the hand controller button and it will massage for you
comfortably.
The Back heating light and LED light button:Press it once, the
back massage ball starts to work with heat. Press it again,the
back heating light is off ,and the function is turned off as well.
Full back massage:the massage area is from lower back to upper
back.
Tapping mode selecting button:There are 3 modes of tapping .
Press the 1st time, this is the 1st mode. Press it the 2nd time for
the 2nd mode . Press the 3rd time the button for the 3rd mode.At
the same time ,you can press “upper back massage ball”,“lower
back massage ball”,“upper back”,“lower back ”and“Spot Massage”
to select the massage area.
The kneading button:Press it once, the massage head starts to
move up and down vertically. At the same time you can press
“upper back”,“lower back ”and“Spot Massage” to select
the massage area. Press it again, it stop working and the button
light is off.
Upper back massage: the massage area is from middle back to
upper back.
Lower back massage:the massage area is from middle back to
lower back.
Full back
Upper back
Lower back
Tapping
Kneading
The button setting back massage head moving range.Press it
once, the button light flashes, it selects the starting point A for
massage head. Press it again, the light is on normally, it selects
the finishing point B for the massage head. The massage head
move vertically up and down in this area between point A and
point B.The third time you press it, it cancel the reserved
massage area. The button light is off.
Spot
Massage
The button to increase the tapping speed.It speeds up more and
more every time you press the button,until it reach the highest
speed. There are 3 speeds options.

S JJ - 7 0 8 7 48W
Product name Rocking massage chair
Parameter
Implementation
Standard
Model NO.
Rated voltage Rated input power Input polarity
※ We reserve the right to make changes without prior notice.
Product Parameter
※For any abnormal circumstances occur while in use and can not be solved by
above solutions, please contact our dealer directly.
Fault Possible causes Solution
Not
electrified
Some of the line heads are not
connected probably.
Connect each line heads firmly. Make
sure it is plugged in the socket firmly.
Stop
working
while in use
If finished the 20 minutes scheduled
working time, it is at standby mode.
Press “Power” to retrieve the
function.
It is over-heated, it initiate its
self-protected system.
Waiting for it to cool down and
restart it.
Over-loaded Lean front a little bit to relieve the
burden, then it will work probably.
No power supply Wait for the power supply
to retrieve machine
Normal, ignore it
It makes noise while the
massage part works
Noise
Fault Handling
1.After using and before cleaning and maintenance ,please
unplug it.
2.After using,please clean the cover with dry cloth, if it is
necessary, you can use some mild detergent, never use any
chemical solvent, abrasive material or metallic brush to clean
it.Unzip the zipper on top then unzip the zipper underneath,
You can remove the neck massage pillow cover.
3.Keep it dry, never soak or wash the machine .Also do not
disassemble it for washing.
4.Do not use it in open-air or humid place. Don't expose it to the
direct sun or rain directly.
1.In order to extent the product serve life and guarantee the
normal operation, please do not press or push hard against the
massage parts.
2.It is not a medical equipment.It is not for any purposes, or
other commercial purposes. If you feel uncomfortable while in
use, please stop using it right away.
Importance Notice
Cleaning and maintenance
Vibration button, press it to start the function, press is again to turn off
the function.
Vibration
Press it to decrease the tapping speed.It reduce the speed more
and more every time you press the button,until it reach the lowest
speed. There are 3 speed options.
Cleaning and maintenance Importance Notice
●●